This Knife Sharpener DOES NOT work! www.SharpensBest.com

[@alexyentas]

This guy has to be 100% honest in the title of the video just to get people to watch. The only people that buy this are those that know nothing about knives. Change my mind.

[@sammaldonado7497]

I probably would have bought one when I was 12. But once you learn how to properly sharpen an edge a pull through is not even an option

[@Notthistime2.0]

Interesting. For quick resharpens it good. Edge doesn’t hold long but that’s why it’s carry able.

[@alexyentas]

A leather strop or even a ceramic rod would be better, though.

[@stevemccallum6429]

People like you are so set on their stones if his video

[@robsilv148]

Your my hero 🤡

[@charliepeebles8419]

Brad, I wanted to express my appreciation for the long blue SharpensBest sharpener I recently received. After just sharpening one knife, I discovered that I could achieve an impressive edge on several others that had proven difficult to sharpen with alternative systems. The tool is indeed effective, and I found the instructional videos you shared on KZbin to be immensely helpful in getting accustomed to its use. Thank you once again, Brad. I look forward to purchasing one or two more of your sharpeners in the near future. : - )

[@92Tabler]

I recieved mine yesterday. The only problem I found was that the plastic threads on the sharp n spark are a bit weak. First thing I did when I got mine was strike some sparks, and I broke the threads that hold the magnesium rod. Maybe I was too agressive with it! Can easily be fixed with super glue tho, so no worries there. However! The sharpener is fantastic! The V notch is so much more agressive than the ones you will find on any other sharpener, it helped me put an edge on an old knife that I couldn't get one on with anything else. The straight edge does take a bit of learning, but I'm getting it down. So far, I'm really satisfied with the purchase. Cheers!

[@TurkeyCreekjackjohnson_]

The spark is amazing for starting a grill

[@bradbuckner9496]

For the life of me I can’t figure out why anybody would press so hard on the feral rod that they actually break the threads off. In the first place why in gods name wouldn’t you just put your finger under the bar and add a tiny bit of support. Thank you for your purchase but this makes absolutely no sense to me.

[@92Tabler]

@@bradbuckner9496 Never had one before, man. I was too excited lol. Atleast I'm not overe here demanding a refund over user error like most of the people you make videos about, right? Lol.

[@bradbuckner9496]

@@92Tabler that is true and I am sorry if I barked a little bit. Oh I get a little frustrated because in 17 years I have never broken one of my sharpeners or chipped the carbide.

[@92Tabler]

@@bradbuckner9496 No worries, Brad! Much respect, and I totally understand. As many people that have made this same mistake, I would be wow'd as well if I were you lol

[@saldomino1639]

Never seen this one Brad great video !😊

[@CalvinMorris-cf8jk]

I am a old man half blind and drunk on vodka and 211 most of the time and I got all 400 of my knifes very sharp with this thing yes it takes time to learn the system you do not just open it and it works you may have to use some skill and it dose take time to learn but once you get it down you will be very happy you learned this skill you will be able to sharpen a knife anytime anyplace and you will be a very happy person like me it took me over 400 knives to get good at it you will get good at it if you keep at it you will never pay anyone to sharpen a knife again ever and all your friend and family will have sharp knives. I love my sharpens best it is a wonderful tool. I do not think I would use it on 300 500 dollar and over knives but everything else is fair game. Semper Fi.

[@brianusa394]

I use this sharpener but only on my work knives. The better quality knives in my collection will never see the red monster. I say monster in a loving way, at work to bring an edge back into cutting shape fast I like it, it’s fast but it eventually runes the look of the knife since my work knives are pretty much disposable I don’t care. When fishing I have a $10 fillet knife that has to be razor sharp that’s where this sharpener excels. If you looking for a beautiful mirror finish on a show knife there are better options

[@EDCandLace]

I've sharpened knives with harder knives. There is no doubt with the right technique that a 90 degree piece of TC brushing against the apex at a consistent angle will sharpen a knife. The v cutters will form the bevel to that angle stripping steel off the blade. As a long time free hand professional sharpener that really is interested in seeing my edges under a micro scope and that is how all my edges are checked before leaving to the customer. I would really be interested in seeing the edge on the knife you just sharpened at 240x and 500. I would also be very curious to see card board and a twisted rope cutting done on a simple steel then going back to paper slicing, just a few cuts of each to verify that what's cutting the paper isn't just a fragile wire edge. Not saying that's what's happening but logic says it's a high possibility. Getting a knife a knife hair whittling sharp while having a wire edge that feels stupid sharp but yet the wire edge crushes and or rolls over after just a few cuts on a tougher cutting medium. Again not saying anything negative about this product please don't take it that way I'm just really curious as I'm someone that is very much deeply invested in sharpening and I very much love doing it.

[@bradbuckner9496]

I missed this post. Good post by the way. First I will say, I never try to make a knife-- hair whittling sharp. Because, I can;t and the other reason is--- I have no use for that kind of edge. It is worthless in the real world, of EDC. My edges do hold up because I take the wire edge off ( with the same sharpener ) before I finish with the blade. Thank you.

[@KachuhzKachCan]

What do you do with the returns? I'd buy a "defective" sharpensBest.

[@jeremygordon4553]

exactly

[@hendawg3048]

i’ll sell you mine…it’s junk

[@mauricioortiz5403]

Looks like it works to me, may make your knife wear out faster but you get what you it for

[@Snowball382]

I’m an amateur knife maker, sort of like Forged in Fire, I pound out knives from old farrier’s rasps mostly. I ordered one of your sharpeners based on your videos, you have a good sales pitch. I hope it works, or I hope I can work it. Love to see your table at a show sometime, but I’m in Wichita. We have cows, and that’s about it.

[@YaBoiDREX]

Did it work?

[@jamestabern6233]

We will never know

[@Kaufeetimevideo]

Can it be he ran out of old farriers rasps?

[@SLE253]

We wired up a base load power station in Alice Springs Australia. All the orange V10 gas fired engines were marked Waukesha Wichita USA. A long way from home

[@Kurkahn.]

​@@jamestabern6233 Actually, if he doesn't respond it means it is shite 😊

[@saldomino1639]

Again Brad ? Your sharpeners work I love my Sharp N Spark !

[@kris6676]

Picked my first one up years ago in the old school orange and its still with me at work. Got 2 more just like the one in this video for home. 😂 I clicked this vid thinking I was gonna have to slam someone in the comment section for being a lair and or an idiot, cuz all mine work just fine. Mahalo and Aloha from Hawaii🤙🏽

[@davemiller8757]

There is a learning curve with this sharpener . It works great

[@keithjohnson5190]

My wife needs one of these to use on her toenail. This would work great for that. LOL

[@andrewsteinberg7103]

I does work, great for touching up while camping , very light and Carry friendly

[@linuspauli8049]

This sharpener really does not work. You can use it to destroy your blades with it, like the most other pull threw sharpener do. Better use a stone for sharpening your knives or use an electric belt or wheel sharpener if the manual process takes to much time.

[@shannonlandre4442]

Obviously the person doesn't work, because the sharpener works fine.

[@edindemic5620]

How to order. I'm from Europe

[@TJAnttola]

Too bad I cant get these here in europe. But I'll try to pick some up next time I'm on vacation in Florida. But those knives on the table in the beginning are nice.

[@billiejoblock9462]

I find some people who are trying to sharp.En the dollar's knife they can find first and not even learn how to use the tool correctly.Once you use the tool correctly you can sharpen many different edges

[@JimApicella-wo8rz]

Good for you, smarter than the average bear.

[@michaelcolloton6971]

I've heard dozens of negative comments about pull-throuh sharpeners. They tend to magnify, rather

[@gravekeeper89]

will these sharpeners really sharpen hard high carbon steel?

[@DroneShotFPV]

Yes, it's tungsten carbide, it works on any knife steel. You just have to be "good" at it, and learn the proper technique. My preference for sustained edges are Japanese Whetstones, but quick sharpens of certain kitchen knives, or field sharpening, I use these. It's more of a preference thing with the whetstones, and I find the art of hand sharpening to be very soothing / cathartic..

[@JimApicella-wo8rz]

Excellent advice.

[@bradbuckner9496]

@@JimApicella-wo8rz Ok comment. How is it 4 U to carry those Japanese Whetstones in your pocket? Or sharpen a pair of fingernail clippers or a 2 foot long handle, limb pruners. Just asking.

[@jeremygordon4553]

gonna have to try one of these out

[@TyMalhoneson]

"I'm kind of pushing down on it hard, tard". That got me good. Respect

[@ericstephens2017]

Sounds like some people don't know how to use it am going to get one maybe more than one

[@michaelshearer3559]

PDS - Pretty Damn Sharp!

[@chasewells5464]

The file would be better for the edge, so would the bottom of a ceramic mug or plate. Just saying.

[@bradbuckner9496]

Let me see U sharpen a hook jawed limb pruner. FAIL. Let me see U sharpen a gut hook on a skinning knife. Sharpen a pair of fingernail clippers. YOU R a failure.

[@yankos_]

6:16 Should have bought a "new" knife and "added" a bit of sharpness to it. Sydney Australia

[@chrisdyck6524]

Yay, it's so much fun to destroy the knife by removing endless amounts of material from the phase

[@garfieldfan2000]

Hmm sharpener doesn't work? Well read the instructions and or watch the videos on how to use it. Quite simple lol. Oh and also practice does help too

[@bradbuckner9496]

So true. Thank you for watching.

[@KingKsEDC]

Did he really say tard? Smh.

[@heavyweightsound]

This guy loves to ridicule customers

[@James-m4k9q]

This guy's gonna be a stump before it's over 🤣🙃

[@Hammertime7366]

Probably eventually works but most people don't want a 6 month learning curve to figure out how to use it correctly.

[@leventenemes9286]

👍👍

[@ericstephens2017]

That's what am talking about

[@rustyrusty9665]

A guard to protect your fingers from getting cut would be a huge advantage to your sharpener.

[@bradbuckner9496]

Do YOU need a guard on your steering wheel so U don't break your thumbs??? Do U have a GUARD on your car door so U don't shut your foot in the door? Do U have bullards by your garage door so U don't hit the garage pulling in or backing out. Just wondering.

[@rustyrusty9665]

@@bradbuckner9496 What do all those have to do with sharpening a knife?? Your answer has no logic at all.

[@garyjohnson7133]

How many times do have to see sharpener returned. Saying it doesn’t work same thing over and over. Use the edge of a file it does the same thing.

[@TheMobster450]

I have one and honestly I practiced and all I end up doing to ruin the edge

[@sharpedgeaddict6255]

That’s because the teacher who’s teaching you isn’t doing good at all. It is the most easiest way to sharpen a knife but in the long run you won’t have a knife to sharpen anymore because these pull sharpeners takes off way more metal than it needs to.

[@michaelcolloton6971]

I've heard dozens of negative comments aout pull-through shapeners. They can magnify,rather than reduce any imperfections in the edge. Get any Work Sharp sharpener and you can stop worrying.

[@bradbuckner9496]

You sound like a wimp.

[@BricksAndSparrows]

I’d try it. I have a hard time seeing it as the last sharpener I’ll ever need, but it looks like a handy compliment to my sharpening setup. The thing is, there is no sharpener (however nice, simple and/or intuitive) that WON’T destroy your knife if you use it wrong. So the real question is, does this design lend itself to simple, effective use? I don’t know. But I have a feeling I could make it work.

[@sharpedgeaddict6255]

Wrong tools for the job. These “sharpeners are a joke. Try using diamond stones or whetstones then come back to me. “Nobody at there house knows how to sharpen them.” Funny statement when your doing it wrong.

[@pagehardy3756]

Staged?????

[@cheshirebowman4465]

I have never seen so much b... s... in my life. He's got all the sales patter in the world. Anybody who know how to sharpen a knife doesn't need this gadget. But if you don't know how to sharpen properly. Then learn.

[@manthoschristodoulides7080]

With this sharpener is impossible to create a stable angle across the edge

[@user-vj3zm8bo2f]

Cut through cardboard once or twice and you'll need a new edge

[@bradbuckner9496]

U pick 1. Stupid or just really dumb. Oh, U probably need someone to explain what I mean. What I am asking.

[@kamranzangeneh7298]

does not work

[@kamranzangeneh7298]

Beady sleezee eyes..crook..lieing s.o.b..

[@JimApicella-wo8rz]

Operator error !

[@hendawg3048]

It’s a piece of junk…

[@JohnkJV316]

Don’t waste your money like I did 👎🏻

[@SharpensBest]

Send it back -we'll make a video of it working.

[@steveaumann6335]

The problem with most guys is between the shoulder and the holder.

[@joshuadavis862]

❤🎉 Hey everyone I hope your having a great day Jesus saves repent and accept the Lord as your savior today if u haven’t he loves u and he died for us don’t get left.✝️✝️✝️✝️💙🧡🤍✝️✝️✝️🎉

[@bradbuckner9496]

So very true. Really proud people will see that.