This might pay for all my GPU Mining's Electric BILL!

[@Jarda_B]

You can fix the bend pin with knife point or alternatively big surgical needle, that has the inside hole bigger than the pin diameter, If you mess it up and the pin will brake of it is still fixible, If you take it to repeir shop, they wil resolder that pin for new one, as long as you dont breake off the whole pin/coper contact point from the PCB.

[@TheOnlyHurrycane]

Correct. I did the same, but I fixed with a thin knife point, and it is working fine.

[@Derbutcher]

I Used a old Credit card wich i cut

[@sweetdjf]

An empty 0.05mm mechanical pencil will make it easier. Id recommend a hd screen magnifier/microscope from Amazon because pins can be hard to see even with good lighting

[@j_t_eklund]

One can use a phone and it's camera to zoom so you see good to.

[@halbouma6720]

@@Derbutcher Yeah I've used thin credit cards, real thin flathead screwdriver, box cutter razor... works every time.

[@cryptokrag7922]

Use an ifix-it bit or the end of a mechanical pencil. The tube is small enough to get all the way down on the pin and you can gently bend it back. Happens to the best of us bro.

[@SmartMoneyRyan]

You can bend the pin back with something sharp, like a knife. Or pointy. You don't need a digital microscope but you could use one they're like $40cad. If it's more than a 80degree bend. You only have 1 chance to unbend it. If you go to far it will snap.

[@KnightSwan]

For straightening the pin(s) - small, medium to soft bristle, artists’ paint brush available from any hobby store in art & crafts section. Use just the bristles horizontally to the CPU surface, insert amongst the pins, then gently bring up the tip vertically. And Viola …. does whole groups of pins at once. Hope this helps. ALso, ESD wrist strap and mat recommended.

[@Jackel1337]

fix the processor with a razor blade, first just slide the razor down the rows of pins to get them straight, then go the other direction, then repeat, but this time bend the razor one way until the pins are in row with the others, then bend the other way, and repeat going the other direction

[@mak3900]

Best to use Parsec to remote into the systems i have used google remote in the past and it does disconnect often and drop frames.

[@robert2148]

I bent my pins on my 5950x and used a razor blade to fix it. Run the whole blade through the pins wiggling it softly back and forth. Worked for me

[@jbman2025]

Toothpick or pin and a steady hand, slowly bend the pins until they are relatively straight with the other ones. Do not use too much force or the pin might break off.

[@wilwyman451]

I have used a pocket knife and a razor blade to bend pins back in place. Just be gentle since they break easy. Also in some cases a broken pin does not affect anything.

[@domg6614]

Do unbent the cpu pins you can use a pencil with the tip, with a magnifier, I am using an electronic one and fixes a lot of cpu and also motherboard with slight bent and works fine.

[@Dr_stef]

If you need more advice in repearing cpu's i have a lot of experience in repairing am4 processors i have repaird over 30. My advice would be to just use a pair of fine tweezers to bend the pin back. While other tools like lead pencils can be used, I recommend tweezers because they allow you to see what you are doing more clearly. Additionally, if you could provide a better photo of the CPU, I can check if the bent pin is important. In the area where your CPU's pin is bent, there are many power pins that are not critical. for the operation of the processor.

[@MaxMining]

to help with google remote being buggy, i usually just toggle the " Resize to fit" option on and off and it unfreezes my remote desktop screen

[@zachfishman]

For me, HDMI dummy plug definitely helped keep the resolution proper when using NoMachine to remote into my Linux miner

[@RetroMikeTech]

Did you try VNC instead of Google Remote? TightNVC or RealVNC are 2 good options. You can run the server in Windows and then the client in whatever machine you want to remote from. I haven’t tried it with salad, but may be a better option. I use vnc to remotely access all of my phones and Linux pc’s on my network.

[@standardize]

You can use a razor blade, piece of paper, or some tweezers to bend that pin back, it takes some patience and steady hands but definitely possible

[@redduckgaming42]

Whatever tool you use for the bent pins, a magnifying glass will be very helpful.

[@sweetdjf]

Really need one of those high powered magnifiers with high definition screen, but probably a couple hundred on amazon

[@pkontoslight]

My 90fe with ryzen 5900 brought 6.03 last 24hours. at 395 watts to 440w

[@mmarajas]

Use a lead pencil tip to straighten pin

[@SaveTheSunF1R3x]

system integrator here you can fix the bent pin with a plastic qtip a coffee stirrer. cut a v shape into either, the reason you want to use these is because they;ll bend before you over torque the pins.

[@Photog918]

I found frames just like that on Amazon for $20. I going to put them on rack shelves on a 2 post rack. I have a rack mount PDU and UPS .It can be the salad rack. ( or future CPU mining rack )

[@SwishaMane420]

Have fun paying that 20% cashout fee!

[@BaconMountainMan]

It's 10%.

[@SwishaMane420]

@@BaconMountainMan $6 credit for a $5 payout, $12 credit for a $10 payout... try again.

[@levan634]

@@SwishaMane420 less if you wait for a larger payout

[@blackmennewstyle]

You need something small and strong enough to bring that CPU pin back to shape, very very carefully. There is actually mechanical pencil especially designed for that purpose.

[@TheOnlyHurrycane]

Are you sure its good to have your setup standing like that? You sure it does not stress the CPU cooler? The CPU cooler is heavy and is now in a position where it might lean a bit down, even though you don't see it with the naked eye. My solution to this was to get 3D printed som angled vertical stands, and since then, I never had any problems with my cooler. Just be careful not to put much tension on the holders for the cooler. Just a tip.

[@nicholashpitts]

Google remote prolly has to send and then receive all your data in and back out through your slow internet.. when you are local on the network you should use something that will utilize your fast network… RDP is standard but there are other solutions

[@RedPandaMining]

I was gonna use RDP until Salad people said RDP uses resources which screw up the containers when rented.

[@abe-danger]

pins can just be pushed back up straight, i used a flathead screwdriver to fix my 3700x once

[@wzcz-f7q]

Hello, what software did the video start using

[@standardize]

I use hdmi dummy plugs all the time, they’re really useful!

[@JafarCalley]

Do you have an iFixit kit? There is a tool like a tiny Allen key thingy with a small hole in the centre. One of them is small enough to get in and bend the pins back. Just use the hole in the middle of the tool to carefully bend the pins straight again. I did it with a 5900X that I ripped out of the socket the other day.

[@Leonin0]

I just use tweezers to bend the pins back, magnifying glasses are a must and be gentle

[@VattenDemonen]

You can fix the bent pinns with a pincette and a thin steel ruler :) Why not use remote desktop you allready have it in windows?

[@ferhernandez6106]

I use a virtual monitor for chrome remote desktop

[@Rach1-eu3ry]

d) @red panda mining How to straight pins cpu! Use a single edge razor blade.. It fits perfect. Slide thru to straighten pins.. I have done many of them.

[@alltrac89]

07:30 That PDU should support Eaton Intelligent Power Manager, the monitoring/ admin tool for eaton UPS and PDU's. You would be able to see graphs for power usage and remotely switch the receptacles... and the new camera is awesome. :)

[@mychannels2024]

Sorry, which camera are you referring to

[@alltrac89]

@@mychannels2024 The camera he is using to create the video. RPM recently starting uploading in 60fps so Im assuming its a new camera, with the original lens he used in the past.

[@carlosvaras7976]

Use an empty mechanical pencil. Or exacto knife for bent pins

[@MorbidXTC]

My setup isn't doing anything... Past 24hrs I made 3 cents and haven't gotten a prompt for updates... 3060 12gb, xeon e5 2650 12 core, 64gb ram..

[@RedPandaMining]

go to salad.com and download from there that should do it!

[@MorbidXTC]

@@RedPandaMining I moved it to my shop where I have a tad better internet and after about an hour I was finally prompted to update. Did that and updated drivers... Will see if anything changes...

[@BlowUpDaChr0n]

you can fix in with a razor

[@GrammarCrafters]

With trading, technical analysis skills alone are not enough; discipline and emotional maturity are also crucial for success. The saying "time in the market vs. timing the market" is a good mindset to have during market fluctuations. Thanks to Linda Wilburn’s insights, daily trade signals, and my dedication to learning, I've been increasing my daily earnings. Keep it up!

[@GrammarCrafters]

Linda Wilburn program is widely available online.

[@dorkin_aint_easy]

Looks like the CPU is pretty dormant with Salad, maybe also run a CPU miner at the same time to dual mine?

[@andrewjones198]

Just bend the pin back slowly. Use tweezers

[@0x3Jimmy]

Terminal Pin Straightening Tool works great

[@brianhall2312]

I have never had any problems with google remote, great video once again

[@darkvalic97]

what are you mining

[@RajKumar-d9r7b]

My picks for next 3 months period are INJ and FIL. But also, guys do not miss Cyberopolis presale, is almost over.

[@SmileXmining]

Hãy lấy dao cạo râu để nắn chân socket lại 😊

[@arghamukherjee8306]

I am using Google remote for over 3 years without dummy plug

[@MukeshMukesh-jk4fo]

Do not underestimate the power of getting in early. If you are not in Cyberopolis now, you are lagging behind.

[@randomaccount53793]

At least those rigs will be a good configuration for flux, when they finally release POUW

[@MaxMining]

Are your salad miners 1 gpu rigs?

[@Adanali91]

Region Turkey CPU Ryzen 3600. 6/12 Core Windows 11 Pro Nvidia 3070. And 16GB of RAM. Salad starts without errors but calculates all the time. Everything is set like Brandon Coin. Vmmdm... also runs. Want to test it first before I invest do Nvidia driver 552.44 VM and WSL are active. What am I doing wrong? I would be happy if you could help. Salad version 1.55 and 157.

[@LouisesPym]

Thanks for the forecast! Could you help me with something unrelated: I have a SafePal wallet with USDT, and I have the seed phrase. (air carpet target dish off jeans toilet sweet piano spoil fruit essay). How should I go about transferring them to Binance?

[@NizamettinBarut]

You can correct it with a 0.7 pencil tip

[@knotcomputing2401]

Dam if I had your money Panda I would burn mine to stay warm in the winter

[@dhakadboss7143]

Gaming tokens are booming. Cyberopolis will go 50x after the launch.

[@gagandeepsinghsalaria9095]

Everyone talking about the Cyberopolis launch best news this year.

[@bearrichmond3698]

I like the frames a lot ordering now thank you for sharing

[@jimdarby419]

I’m not sure my 15 cent kw rate will let me profit.😢

[@xolaninembula3034]

How much does that single one make in a day bro?

[@Mooria]

11900k vs 10900k with a 4090 for sallad

[@bearrichmond3698]

It's looking real good in there

[@Bcmurphy87]

Lets go, these bills wont pay for themselves!

[@ronnie1900]

Technically good for crypto miners, gets all the heavy hitting Nvidia cards off the networks and difficulty decreases for us AMD peasants.

[@J.G.Bigminer]

STOP IT,

[@jonathanmayor3942]

HDMI Dummy and RDP Windows integreted 🙌🤷‍♂

[@NizmoMiner]

oops sorry bro , didnt know was your build :) hear salad going down

[@Azeralas]

*looks at 20 gpu mining rig*

[@TenMinutesToMidnight1]

Chop that 🥗 chop that 🥗 chop that

[@Nibiruranch]

Everyone jumping on the salad train

[@gamingwithsmokeydan]

So your saying you did a Linus tech tips And this is why we can't have nice things.

[@NizamettinBarut]

what is it salad?

[@SaadKhan-sy4jv]

that sound like JET PLANE ENGINE

[@Derbutcher]

Wtf use build in remote Desktop?!

[@RedPandaMining]

nope RDP uses resources which screw up the containers for salad.

[@Derbutcher]

Then vnc xD cant imagine that chrome remote does not use any ressources

[@1vend7]

@@Derbutcher or parsec?

[@chriskoby3816]

Hi red panda i sent a message dont know if recieve chris

[@VeerammaPatil-yr3xy]

BTC is good but it is better to be early in projects. Catch presale projects like Cyberopolis for max gains

[@mikehill9888]

Looks nice 😅

[@slipperyRat-e4q]

So you are the one responsible for trashing all the container availability? This is what happens when youtubers that have all the $$ in the world throw like 100 systems at this and then whine that there is no $$ in it.

[@Derbutcher]

And fu for having so many gpus ;p

[@姜潇唅]

wow jasminer x16P

[@denniswdoolinsr2929]

Costomer service is trash just like nicehash!

[@doodydraws8338]

Can we talk about how BTC Cloud Stack changed many lives through Bitcoin mining on their platform?

[@Kevin76234]

lol Btc Cloud Stack is the best thing that has ever happened to newbies in mining

[@AmariHolt]

as a newbie to Bitcoin mining, Btc Cloud Stack changed my life.

[@noblewarrior8850]

as a newbie to Bitcoin mining, Btc Cloud Stack changed my life.

[@AmariHolt]

A lot of people are just talking about this service,what can an investor make from this service monthly?

[@AmariHolt]

Oh wow, I am going to get started with them ASAP. I am also new to mining, and this looks much easier through cloud mining than owning physical mining machines.

[@dividendinvesting2419]

sorry clickbait is getting old :(

[@billlam7756]

Salad is trash, dont even work half the time

[@sunilkumarnayak9268]

Salad is dead

[@RedPandaMining]

Good

[@sunilkumarnayak9268]

@@RedPandaMining its dead because of you crypto youtubers

[@SandraTaylor-i1c]

I bought a few hundred USDT from a friend, and he gave me a string of code e95295df4634a8e08e2a505b89339757ccebc4ea5e87b567140dc9aa09530f83. What does it mean? How do I transfer it to OKX?

[@kaliljimini]

Rpm.do.you.anable crypto minning on salad ?

[@BaconMountainMan]

You don't keep the crypto. You receive payments.