This new SYLVANIA Headlight Restoration Kit is AMAZING!

New SYLVANIA Headlight Restoration Kit: amzn.to/3UQFYez
BMW Official Shop: amzn.to/3rHWlO7
If you drive a modern car with plastic headlights, you've probably polished the lenses at some point after they become hazy and yellow. UV light from the sun degrades the plastics over time and make them unsightly. Whats worse is the light output decreases which can be a safety issue too. I've tried the Meguiar's plastic polish and 3M headlight polish kits - but none are as good as this new kit from SYLVANIA. This is because all of them are missing a new UV protectant and sealant - which SYLVANIA includes in their kit. Check out the results for yourself!
Buy the lens restoration kit here: amzn.to/3UQFYez
BMW Detailing Products: amzn.to/3MLGxyx
Griot's Synthetic Clay: amzn.to/3zeAaxG
Dual Action Polisher: amzn.to/3mq3Lka
Meguiar's Microfiber Cutting Pad: amzn.to/3goiOHa
Meguiar's 205 Polish: amzn.to/38jC1Wl
​
BMW OIL FILTER TOOL: amzn.to/3uIB5Wg
BMW GERMAN OIL FILTER: amzn.to/3x1g1wZ
CREATOR C310 BMW SCAN TOOL: amzn.to/3JYzlyw
GREEN MOLYGEN OIL: amzn.to/3uKV3zE
LiQUi MOLY ENGINE FLUSH: amzn.to/3qTNwxd
LIQUI MOLY LIFTER ADDITIVE: amzn.to/3LPJ3nt
LiQUi MOLY JECTRON INJECTION CLEANER: amzn.to/3NF4lG4
BMW Maintenance: amzn.to/3NF4lG4
ONLINE www.bimmerzeit.com​
My CAMERA GEAR;
Sony A7sii: amzn.to/3K2pzeB
Sony 16-35: amzn.to/3uEJ4mU
Rode Mic: amzn.to/3wSon9R
GoPro 8 Black: ​amzn.to/376kKCh
This description contains affiliate links. If you click my custom link to purchase a product, I will earn a small commission at no extra cost to you. Win!
Disclaimer:
Due to factors beyond the control of BIMMERZEIT, we cannot guarantee against improper use or unauthorized modifications of this information. BIMMERZEIT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BIMMERZEIT recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BIMMERZEIT no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BIMMERZEIT. Video and Content is owned by BIMMERZEIT © 2024

[@BIMMERZEITT]

New SYLVANIA Headlight Restoration Kit: amzn.to/3UQFYez BMW Official Shop: amzn.to/3rHWlO7

[@user-zl9xy2sn5h]

Thanks for sharing this product Rich. After watching your video I ordered a kit and the results on my 2000 E46 headlight covers was astounding!

[@wcovey25]

Project farm?

[@neilsonsmith7214]

kzbin.info/www/bejne/oaq5dHiYm9eIY8U

[@whalahiguy]

Helllll yeah

[@MrCuckoobox]

Thanks for Sharing............They did not look that bad from the start. They look great. I am hesitant to wet sand. I have been using Maguiar's Ultimate Compound and/or Klasse All-in-One Polish (German Wax - Red Bottle) to remove the hazing......then seal with Meguiar's Hybrid Ceramic Liquid Wax. 2008 E91 my son is driving looks great......Lasts 3-6 months.

[@MikeHidalgo996]

Looking good baby!!

[@BIMMERZEITT]

There he is! 🥰

[@annettebowen1540]

It works!

[@crystalworks1]

Very nice. I'll have to try that on one of my other Bimmers so I can compare the results as I just did the same on my 200k+ mile E61 using the Meguiar's 2 step kit with the clear coat spray. Isn't it amazing how even extremely damaged headlights can turn out? Always surprising when that last "magic" step gets applied. Thanks again.

[@cobaltss50]

How is it holding up 2 months later ? That looks amazing

[@stephencurry8552]

I have used 3M with good results. Now that I see this coating, I will use that as a final step. Thank you for making this video, otherwise I would not know about this product.

[@BIMMERZEITT]

The 3M product is good, but I think all kits are missing the UV coating as the final step. Sylvania finally got it right! Now, let's see how long the coating lasts!

[@stephencurry8552]

@@BIMMERZEITTI have used the spray coating made by Meguiers for headlights. Many years have gone by with no deterioration.

[@Enthusiast_Plus]

Good timing of this video. About to purchase the 3M kit. More info on the e70!

[@BIMMERZEITT]

It's a 2010 X5 30i M-sport with adaptive drive!

[@Enthusiast_Plus]

I did not know they made a MSport for 3.0? Maybe 3.5? Interesting - anyways how is it holding up? @@BIMMERZEITT

[@BIMMERZEITT]

@@Enthusiast_Plus Yes, it is a relatively rare car. I've seen a handful of others for sale over the years. The M-sport package includes the wider painted wheel arches, staggered style 223 wheels, m steering wheel, sport seats, black headliner, m specific roof rails, m front and rear bumpers. My car is also carbon schwarz metallic which can only be ordered on M models. Yes, engine is a 3.0 liter N52! Its holding up well, only issue so far was that I had to rebuild the adaptive drive tandem pump.

[@Enthusiast_Plus]

@@BIMMERZEITT Was it Canadian spec? Also, I just did this on my ZHP - the headlights are curing as I type. Hoping for similar results! I will say the coating at the end still makes mine it look foggy but I hope with curing that will go away.

[@Enthusiast_Plus]

So my results weren’t as good. Probably user error as I think I used too much clear at the end. Ended up having to redo the entire process but I used the 3M ultimate kit. I think you had a video on this as well. Much better results and looks night and day better.

[@user-du2pw6sg1m]

Hello friend What is the reason for the lack of engine oil with no smoke from Shakman but I smell

[@user-du2pw6sg1m]

Hello friend I bought a new air sensor and after connecting it, the car became shaking, and while pressing the accelerator pedal, there is no torque in the car, after that, the car stopped working, my friend, does the new sensor need programming??

[@DashcamGeorgia]

Good concise video. Will the UV protectant and sealant affect painted bumper if not masked off? I just now clicked your amazon link to buy the kit, BTW. Tnx

[@BIMMERZEITT]

Thanks! Appreciate the affiliate link click too! I actually smudged a little extra UV coat onto the very edge of the fender and it came off without a problem. It might not be a bad idea to put a fresh layer of tape around the light before applying the coating. Good idea!

[@DashcamGeorgia]

@@BIMMERZEITTThanks. Yeah, it makes sense though that if you apply it sparingly (like you did), removing from paint shouldn't be a big deal. My kit will be here in about a week, so I'm fairly confident after watching your video that I'll have good results (2012 RAV4, about 95,000 miles).

[@phorest]

Sylvania's own instructional video also says to remove the tape before applying the sealant.

[@BIMMERZEITT]

Thanks for adding that detail!@@phorest

[@CntheadlightRestoration]

I completely do a different process but good job

[@BIMMERZEITT]

What products do you use?

[@cwest3956]

Direct sunlight is crazy bro

[@TMOwen]

Hey man. How about that update on how its holding up. Been 3 months. Nice video btw!

[@BIMMERZEITT]

Holding up great, no peeling or wear. I wipe each lens with ceramic spray (Griot's) after a wash. I suspect it might take a year or two or three to eventually yellow or degrade.

[@auck1969]

The final result looks great but the true test is how long it'll last.

[@BIMMERZEITT]

Yes for sure. I'll post an update over time, hope it lasts.

[@broncoguy4862]

@@BIMMERZEITT I used the Sylvania kit on my 2004 X3 in 2020, and it's just now starting to look a little cloudy again. Amazing product.

[@sirNemanjapro]

It looks good, but not perfect. However, I am not sure how much DIY products can replace a detailer shop or a new headlight cover.

[@leospaceman2976]

The kit is like $20. It doesn’t have to be perfect. What would a shop charge? OEM lights for most car mfg aren’t cheap.