I've been watching This Old House since I was a kid, and they never fail to disappoint in the amount of knowledge and information they provide every episode. This is why the show has lasted this long IMHO, bc they explain things as they go - and I love that!
@andyjame9774 Жыл бұрын
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzbin.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
@OhanaFilms3 жыл бұрын
The segment with the house model was fascinating.
@poeticthoughts063 жыл бұрын
Richard's segment on insulation/ventilation was a pleasant watch. Now I want M&M's.
@brenthartleyhartleybrent95162 жыл бұрын
Home improvement shows have turned into interior design reality T.V. TOH is about the only one left that you will learn from. It's always fascinating.
@johnnysymphony3 жыл бұрын
Rich Trethewey is like a kid in a candy store at the builders convention. I love the energy and wonder he has for all things plumbing
@malayaleeking4 жыл бұрын
This is the best show I"ve been watching for 30 years or so.
@demagab4 жыл бұрын
Even though I have nothing to do with building and stuff, I would love to spend my entire quarantine in that building show
@MyGoogleYoutube3 жыл бұрын
Contractors that I would trust to build a home to this standard and with this much technology. Zero.
@derekseed4 жыл бұрын
Rich Trethewey is my favorite TV presenter of all. He's a great teacher on-the-air. He could host any show.
@ChaosDave211 ай бұрын
When I was going through HVAC school, I would watch TOH videos to see Rich explain and demonstrate a concept I was having trouble with, and I would understand so much better. Now that I’m in building sciences and I’m getting into energy modeling, I use this presentation as a teaching tool to help new techs, and I still watch it again for refreshers.
@cairnsandy14 жыл бұрын
it's just great seeing how this building practice has matured , and the insulation/moisture barrier products being used in some builds now , this approach revolutionary. It looks like the tipping point has finally been reached , where people now see the sense of it , and are adjusting there renovation budgets to achieve a properly insulated home...................... 3 cheers for the building industry , well done.
@kellerrobert804 жыл бұрын
Or just move to a more temperate climate.
@bjornjoseph3 жыл бұрын
Kevin always reminds me of the kid that's holding the flashlight for their dad. Not helping but helping.
@pf56583 жыл бұрын
Isn’t it great and amazing how far cordless tools have come that we no longer see a bunch of cords all over the worksite creating tripping hazards?
@becoolnotcruel2 жыл бұрын
Wish we had knowledgeable and honest guys like you in Calgary, Alberta, Canada! It's a crap shoot when trying to find someone who isn't out to take your last dollar and still not get the job done right if at all. Watching your show at least allows some of us the time to dream a little.
@MrEricld13 жыл бұрын
Have you ever used R19 TStuds. Solves the thermal loss problem of traditional wood studs, and they are stronger. Easier to pull wire and run plumbing too.
@rikoshi14 жыл бұрын
If you ever needed a few more episodes I got a ton of stuff on my house needing done
@JamesAutoDude3 жыл бұрын
I need a whole house built from scratch since I don't have a house at all 😭
@jakegardiner63043 жыл бұрын
@@JamesAutoDude get a job bum
@venividivici42533 жыл бұрын
@@jakegardiner6304 Lmao!
@MrAlexander336 Жыл бұрын
Thanks for the info on knob and tube wiring! I didn't realize the tube was to protect the framing from shorts
@DavidSaintloth4 жыл бұрын
I used to watch this show when I was 13 and thought it went off the air, found it on youtube, subscribed "all" instantly!
@freshguy6014 жыл бұрын
I loce this old house, it gives me all kinds of ideas i can do when i hit the lottery!
@bp41703 жыл бұрын
Kevin is the only guy I know who carries his nail pouch like a pocketbook, its very fitting for him.
@spacewolfjr4 жыл бұрын
It's really nice you're helping Robert Redford with his house.
@bunbunson274 жыл бұрын
get that redfordation
@mariealv48883 жыл бұрын
Like Redford need it
@FoodforSpecialEvents3 жыл бұрын
I was thinking Phillip Seymour Hoffman
@ro63rto4 жыл бұрын
"The whole house is monitored." "I'm sorry, Dave. I'm afraid I can't do that!"
@everythinganythingt62414 жыл бұрын
this old house 2001
@tackyman20114 жыл бұрын
"Open the french doors, HAL."
@mikegirard43883 жыл бұрын
Modern developers didn’t forget about overhangs and eaves. It’s just cheaper to build a house with the smallest roof area and soffit possible. Shingles aren’t free. Overhangs were common prior to Prairie Style. My 1925 central hall foursquare had 40” eaves. My current 1905 home has about 24” eaves.
@Terminalbeats2 жыл бұрын
Those candies were my favorite part
@xedasxedas4 жыл бұрын
That old timers electrical ceramic isolators really amazing.
@jayropa4 жыл бұрын
I could listen to Richard talk about HVAC all day.
@sketchapp37834 жыл бұрын
Needed to see more of the concrete precast foundation, like how do you secure them without a true footer.
@designstudio80133 жыл бұрын
Mortar
@SubsonicNoise4 жыл бұрын
It‘s just a little detail but its nice that the quotes in the intro now align more with what the show is like! Before it was always like "oh god this is so bad" "is this really worth saving" which i get is more dramatic but the show is really a lot more chill than that 😁
@wolfie3167813 жыл бұрын
Quality stands the test of time this old house are the best for that guidance
@rebokfleetfoot4 жыл бұрын
plenty of fresh air and heat, sounds to me like an old house with a wood stove :)
@LEDZEP7693 жыл бұрын
PBS RERUNNING THE SAME EPISODES OF THIS OLD HOUSE IS GETTING OLD!!! 👎🏚️🤯 📺
@douglasstewart1664 жыл бұрын
I love this channel, I have learned alot from this....
@ElstonGunnII2 ай бұрын
They had that folding attic stair at a showroom in London featured in season 13 in 1991! Did we finally catch on? Surely it hasn't taken that long to make its way over here
@heyyou64262 жыл бұрын
Explained beautifully
@kylekyle84713 жыл бұрын
On that outside corner, instead of waiting time and fasteners, why didn't you just put a 2×6 stud, 90 degrees to the corner stud? Gives you a full length nailer and beefs up the corner. Also saves time as it's installed during framing.
@williamskrainski84073 жыл бұрын
I reframed a kitchen floor back about 20 years ago and had a plumber come in behind me and box notch my new framing.....it took three guys to hold me while he made his get away....
@yssubed24 жыл бұрын
Sure the wider spaced studs will reduce thermal bridging but you still have the stripes. What they should have talked about was eliminating the thermal bridging by using foil backed foam panels to sheath the entire outside of the house before applying the regular exterior sheathing. Even 1” will make a dramatic difference. Better is 1.5” or 2”. You add 7-14 R value and eliminate the bridging. This is pretty standard in custom building in Canada now.
@itech3014 жыл бұрын
that's part of the modern code in the US as well. They neglected to mention it here, but I'm sure they will when they install the wrb.
@MustPassTruck4 жыл бұрын
I like the external blanket idea from Matt Risinger's channel or a similar system by Roxul better. Also like the idea of essentially having 2 walls separated by insulation.
@TheGuyThatEveryoneIgnores3 жыл бұрын
A double wall would have been more energy efficient as thermal bridging would be mostly eliminated (and the wall could be arbitrarily thick).
@Nill7574 жыл бұрын
High efficiency insulation and air barriers -> yes. Net zero energy, making your own power at five times the cost of the 24/7 utility power, which is still required, even after building an entire addition structure just for solar? No. It’s a racket. Might as well attempt net zero food, clothing, transportation.
@protonneutron90464 жыл бұрын
Mark, they scam on people who only have a 3rd grade education
@rossmcleod79834 жыл бұрын
Mark Heslep massive residential solar take up in Australia. Massive. Why? Saves you money.
@Nill7574 жыл бұрын
@@rossmcleod7983 Why? As you likely know, government subsidies are why, in Australia the SSCT in particular. If the government passed a law paying you for the majority cost of a cow and a milking machine, along with a guaranteed retail price for your cow's excess milk, then you might imagine getting a cow in the backyard was a great way to save money too. The power utility neither needs nor wants your residential solar power, but by law they are forced to credit you for it. They can make clean power more cheaply with less resources than rooftop solar ever will.
@michaelesposito26294 жыл бұрын
Nothing wrong with net zero clothing.
@ChedWick054 жыл бұрын
I want to cry every time I see OSB.
@7727777777777774 жыл бұрын
You should have used Tstuds there insulated..you should have used California corner when you framed your corner.
@johnstephens28264 жыл бұрын
Those block and plywood corners were ridiculous....hahahaha
@johnmacward4 жыл бұрын
I love Richards explanations...
@chetlangford21443 жыл бұрын
Trees are a good way to cool and block wind! Love mother nature! #askthisoldhouse
@jackoshea6874 жыл бұрын
At 4:01 wall stud not flush with bottom plate.ha ha gotcha.
@TheGuyThatEveryoneIgnores3 жыл бұрын
Wood ain't perfect.
@modernwize2 жыл бұрын
I just built my house this way. There are a lot of other things to consider. I have double walls (Staggered stud).
@Lewis.Alcindor4 жыл бұрын
3:10 The stud insulation value of R5 would translate to a U-Value of .20, which is fairly decent for a closed window. A better analogy to an open window would be concrete or metal studs (which would be effectively R0-R1). In terms of thermal bridging, wood is fairly benign compared to metal, concrete, or masonry.
@desotopete4 жыл бұрын
I like the show but maybe it's time to change the name to "this million dollar house."
@rversocal88894 жыл бұрын
Most of the houses in a lot of the local neighborhoods are at least a million.
@Bfould31204 жыл бұрын
24” on center framing came from building habitat for humanity homes in the 1970’s. Needed to lower lumber costs and found better insulation as a happy accident. Building better does not need to be expensive...being pretty is expensive and that makes for good TV.
@mikecoulter52433 жыл бұрын
In many neighborhoods across America, a million dollar home is the new median. This isn't the 1990s any longer.
@TheGuyThatEveryoneIgnores3 жыл бұрын
@@mikecoulter5243 The expensive can come from having a 4,000+ square foot McMansion, but more likely from a lot that costs hundreds of thousands of dollars.
@Spentelectrons3 жыл бұрын
@@rversocal8889 what's your point? More people have risen from poverty recently then ever in human history. The lowest paid person on the job has it exponentially better then almost every human in history and most humans today.
@SkylerKing4 жыл бұрын
It occurs to me that switching to 2x6 rather than 2x4 has the very obvious drawback of reducing internal floor space. It also doesn’t have the same strength characteristics as 2x4, despite what this guy is saying. He’s likely only thinking or referring to the compressive load that the wall can handle (vertically). It won’t have the same lateral strength, though, or the same perpendicular rigidity for the walls. However, placing studs 24” on center rather than 16” on center does mean that less material must be laid out and framed, less time is needed for said framing, etc, which means money is saved on both materials and man-hours while still being able to charge the customer the same amount (if not more, since it’s a “new and modern” design). I suspect that may be the biggest motivation for this “breaking of convention”.
@jacobs99393 жыл бұрын
I Love your videos
@joelmlller4 жыл бұрын
Knob and tube is some scary stuff , seen a lot of it throughout the years rewiring fire damaged homes
@ronsmith13644 жыл бұрын
"Old wiring fire" shudder & plenty still in use Be nice if the power folks would subsidise wiring upgrades along with the insulation underwriting. Wonder if the efficiency of the grid would improve too.
@joesyuh4 жыл бұрын
Cheaper weaker holes in the name of saving the planet. Awesome.
@BB-uz4tc4 жыл бұрын
The NYC Peaky Blinders love u fellas. Stay handsome. Awesome vid
@rhobi-jb9um4 жыл бұрын
Who in the name of all that's holy plans their house construction to this degree? I think it's just for the TV.
@MrEazyE3573 жыл бұрын
People with lots of money.
@blazeharding5744 жыл бұрын
For the insulated header, I have seen this as common practice to put the insulation on the interior part of the header, but why not put it on the outside, or sandwich it? Most building science theorists say putting insulation on the exterior side of your building is more important because it keeps the structural part of the wall inside of the thermal layer. In a sense, less expansion and contraction because it has an R14 barrier on the outside instead of putting the wood exposed to the temperature changes without any insulation (or less insulation when coupled with exterior insulation).
@ronsmith13644 жыл бұрын
check out Matt Rinsingers channel 'New building technique '
@woohunter14 жыл бұрын
Probably depends on the region, in the south, the walls typically dry to the inside, in the north, walls typically dry to the outside.
@2008tfe3 жыл бұрын
I am craving BTUs now.
@hillbillyjer3 жыл бұрын
I guess plywood works but I was taught to nail in a flat stud for drywall backing, just turn it sideways and you have 3/4” backing all the way up.
@HaploBartow3 жыл бұрын
Probably a trade off between necessary nailable surface and available cavity space for insulation. Don't think it'd make much difference either way.
@RicardoJunqueira4 жыл бұрын
These episodes could come out at faster speeds. I love this show.
@WWHVAC4 жыл бұрын
Nice demonstration and design!
@michaelholliday1004 жыл бұрын
Why would you not do an exterior insulation to eliminate or give a thermal break?
@HistoricHomePlans4 жыл бұрын
It's generally a very good idea. But there are some reasons why it is not the answer for every project. On an addition/renovation you might want to match the original wall thickness, so that both exterior and interior finishes align. Also, when you put insulation outside the exterior wall sheathing it adds a level of complication to waterproofing details around doors and windows that many builders aren't familiar with. Consequently it may take them longer and they will charge more.
@michaelholliday1004 жыл бұрын
@@HistoricHomePlans but I thought that you were trying to accomplish a Net Zero house?
@texgibson62364 жыл бұрын
If you build a double wall with a two inch air space between the walls with insulation in both walls. It how they build older builds in German. It is very warm on the inside. How open up one these walls in winter time. It was cold on the outside and between the walls. But build was warm and with single windowers.
@drewp5034 жыл бұрын
net zero isnt as much about cost savings it's about comfort...a normal house has a ducted system that basically runs heat or a/c steady everyday, blowing recycled crappy air around all the time...a modern house uses geo thermal for cooling and radiant for heat...add in good insulation and an air tight jackey you will have a pleasant house that's cheap to run
@ryangross16294 жыл бұрын
drewp503 a forced air house can be net zero, it’s not based on using radiant heat and geo thermal cooling.
@STXVIEC4 жыл бұрын
Was very interested in the electrical part. Should have showed what the original panel looked like
@anthonyromano85654 жыл бұрын
probably two 200 amp panels.
@theclueguy33884 жыл бұрын
fuses and knob and tube probably
@fireace90454 жыл бұрын
@@anthonyromano8565 probably 3 phase 480v service
@zack99120004 жыл бұрын
@@fireace9045 3 phase is almost unheard of in residential homes in the US. Extremely expensive to have installed. No way it was 3 phase 480.
@ISpitHotFiyaa4 жыл бұрын
The original panel is probably long gone. The majority of the wiring in there was fairly modern so they probably replaced the panel when that was added. The house was originally all knob and tube and a few pieces still remain because you pretty much do need to do a whole house renovation to completely rid the place of that stuff and this is likely the first time that's ever happened for this house.
@schlz694 жыл бұрын
worried about heat transfer via conduction, today the 2 cavity at a header is pretty standard, but you added metal nails, that are more conductive and will sweat, a couple dabs of PL accomplish the same thing without adding a conductor.
@BearMeat4Dinner3 жыл бұрын
OMG - I got that stuff to deal with in my attic!
@oliviagreen88534 жыл бұрын
This looks very expensive
@Jeff92024 жыл бұрын
All that smart technology yet they needed a paper map to navigate the home show..
@jckclt4 жыл бұрын
MAtt Risinger on the Build Show is doing nevel level things compared to this. Instead of the 2x6, go with off set 2x4, which make the wall thicker for more insulation and leave a gap between the 2 two 2x4 for spray foam to get into. On the exterior, you put a zip system to cover the sheetboard connections and then put ridgid foam board. Using 2x6 boards and spaced out farther is obviously better than 2x4 with 16 on center, but this is old news. Nothing new being shown here.
@thejpkotor4 жыл бұрын
8:21 ‘I counted these m&m’s...’
@wholeNwon4 жыл бұрын
Great to see tech progress, esp. in HVAC, solar, etc. But whenever I do the math. I almost always return to the KISS rule. A single failure in complex systems, something that must be more likely to occur than in simple systems, will eliminate the cost savings from enhanced energy efficiency. Complex systems also usually require more maintenance as well. Where I live, energy is relatively inexpensive. Often the average human lifespan is too short to justify the increased expense. Perhaps that's not the case in other areas or different parts of the world.
@user-sm9hh9hz8j4 жыл бұрын
Your outside design tempreture is *95 F* ! Our outside design tempreture in Kuwait is *118 F* .
@Stevenowski4 жыл бұрын
How much humidity do you have with your heat load?
@ronsmith13644 жыл бұрын
Different climates require alternate solutions. The 'preconditioned' air exchange is the really intrigining tech for me. Earth tubes function better in a dry climate if you can incorporate enough underground length. & 'harden' the intakes from interference by environmental issues.
@user-sm9hh9hz8j4 жыл бұрын
@@Stevenowski Our design relative humidity is 50%
@user-sm9hh9hz8j4 жыл бұрын
@@ronsmith1364 !
@stopitstopit8583 жыл бұрын
In the future the heating will be done by radiant floors and radiant sheet rock boards and cooling will be done by wireless sheet rock boards ice packs
@TheGuyThatEveryoneIgnores3 жыл бұрын
A cold wall surface could lead to condensation which would not be good.
@robj27043 жыл бұрын
I believe it should be "code" that bath fans be on a mechanical timer (about $30) of, say, 0 to 30 minutes so the chance of a bath fan being left on is eliminated. Many bath fan users leave the bath fan on for a bit longer to give it time to move the humid air out, but can forget about it and not return to the bathroom to turn it off. At 70CFM, it doesn't take long for a fan to suck the conditioned air out of the house, whether summer or winter. Regardless of how tight a house is built, air is going to come in somewhere to replace the air being sucked out. That outside air is not what you want invading your home since it has to be conditioned by the climate control system of the house. I can appreciate the host's effort to counter this problem, but most people just can't afford a system like being suggested in the video. Range exhaust fans just aren't used for an extended period, but they should be able to function as long as the food preparer needs. And, the food preparer is typically in the kitchen to turn the fan off when it's no longer needed.
@bloodcarver9134 жыл бұрын
Wouldn't it be cheaper to demo the old house totally and build from scratch?
@JanGokor4 жыл бұрын
No because of bullshit government regulations. If you build from the ground up it will cost way more that keeping the existing walls. Here in Los Angeles they will MAKE you install solar, install a rain collection system, MAKE you install a certain amount of trees per square ft of you lot size. Plus because of the earthquakes we have you have to hire a siesmolgist to work with the architect to design a "safer home" but if you keep just 20% of the existing home you don't need to do any of that
@spacewolfjr4 жыл бұрын
When are we going to learn the secret Trethewey family spaghetti recipe? I've been waiting 40 years!
@TyinAlaska3 жыл бұрын
I'm surprised on this particular house that they didn't use metal studs. Edit: , and structurally insulated panels on the exterior to close off the stud-leak.
@goatlady77614 жыл бұрын
How much extra money does all this cost, wouldn't it be better to increase solar panels?
@kalyanjagtap34 жыл бұрын
This very nice design! Can I get layout plan for this design?
@ShakespeareCafe3 жыл бұрын
First world luxury, an energy-intensive cavernous home 3000 sq ft x average 8 ft ceiling = 24,000 cu ft of airspace to heat 8 months out of the year. Maybe you have 2-6 people living in it. Anyway you slice it, these homes use a lot of energy multiply it 50 million homes
@mr.koivisto69754 жыл бұрын
Could you have done a double stud wall for more efficiency? Or is that not feasible?
@TheGuyThatEveryoneIgnores3 жыл бұрын
They probably did not want to sacrifice the extra floor area, but yes, a double wall would be more energy efficient. If I ever build new, I will definitely use a double wall.
@daveramsey12264 жыл бұрын
Lol. I want more on this channel than I do any other channel
@b_uppy4 жыл бұрын
How do some of those building techniques hold up for earthquake zones???
@jeffreyjacobs60724 жыл бұрын
Why would you ask such a question for a build in R.I..? 🤨
@vkhombal2 жыл бұрын
is there a coating that can be painted/sprayed on the studs to mitigate the problem of thermal bridging?
@pablomax30454 жыл бұрын
Why not just use sheathing with builtin rigid foam? Then you completely decouple those wood frames. Not to mention, you get a way better air and vapor barrier.
@Dan-yi2hw4 жыл бұрын
LETS BE HONEST IF I FART HOW LONG IS IT GONA STAY IN THIS HOUSE
@ayourk14 жыл бұрын
I believe there are alternatives to studs that increase the R-Value. I think I saw something about them on the Build Show channel.
@frumpd634 жыл бұрын
T-Studs
@zack99120004 жыл бұрын
@@frumpd63 and using spray foam that insulates substantially better
@anthonyromano85654 жыл бұрын
How about foam on top of the sheathing and a rain screen. Ok its remodel.
@heinrichsoltow18294 жыл бұрын
@@zack9912000 some folks hate spray foam because 1. if its put on wrong it ruins the whole house with chemical off gassing and 2. removing it later means you have to take out whatever its on. so instead of just taking out drywall and replacing w/ the latest and greatest, you'd essentially have to tear down the whole house. There's a horror story about a couple who had to take off their whole roof (rafters and joists and all) after a botched job.
@Ham682294 жыл бұрын
No longer pushing "tankless" water heaters?
@isomgmsghs4 жыл бұрын
Thre isn't a tankless heat pump water heater
@bradm16274 жыл бұрын
No savings and they don’t last
@JanGokor4 жыл бұрын
Tankless I great with natural gas or propane but not electric
@user-dn2ql3vr9x4 жыл бұрын
Nice
@bermudas_daiquiris4 жыл бұрын
16:37 "The whole house is being monitored, and that's a great thing." ...Is it though?
@zack99120004 жыл бұрын
Not this way, watch the build show here on youtube and they use truly the state of the art products.
@nramos334 жыл бұрын
Monitoring of a house is awesome unless you're a paranoid person who thinks big government is coming to get you. If that is you, not judgement, but people some people have this grandiose mentality like they're so special that there's an entire department in the government dedicated to get just you. Those paranoid people end up dying ranting and raving about the same stuff that never comes to pass. I mean, how many videos and e-mails mentioned martial law and Obama and did anything happen? Spoiler, no nothing happened.
@cc12300 Жыл бұрын
Off the back of the HAWWWSE.
@Casmige7 ай бұрын
What if… You did a 6” wall using off-set staggered 2x4’s?.
@dubya132074 жыл бұрын
I’m kind of surprised they didn’t use Tstuds...those are R19 *at the stud*
@paulnovak8334 жыл бұрын
Even better use icf to the roof
@luismonroyRealtor3 жыл бұрын
Are you guys still in Rhode Island!? I live here! Lol
@Intechcity4 жыл бұрын
Beautiful
@johnneytilley41654 жыл бұрын
Holy jezez. Good thing there's no safety inspection.
@Bobtrain0074 жыл бұрын
If you really want to insulate properly, use foam not bats. You couldn’t frame 24” oc with concrete tile . I personally would not give up the structural advantage of 16” oc.
@michaelesposito26294 жыл бұрын
Lol doubling in size? You’re building an entire extra house
@hjwang44773 жыл бұрын
how about exterior continuous insulation. perform much better
@romanfields79004 жыл бұрын
We've used 24" too.
@skiprope5364 жыл бұрын
Homes need to breath. You want to breath all these new building materials...I think not.
@omzig184 жыл бұрын
This house is gonna have 4 tons of nails and screws alone