THIS Piece of Wood Will Make Your Crown PERFECT

[@tbird341]

Love watching this father and son. Reminds me of the days I was able to work with my father in construction, I miss him so! Thanks guys.

[@mipspc]

To eliminate any angle cutting errors (upside down, inside right…etc) I always make a little outside corner and inside corner samples and label them IR IL OR OL. No more angle mistakes.

[@StudPack]

Great tip thx 👍

[@fifthamendment1]

I have two templates. L/R inside corners and L/R outside corners. I sometimes hold the templates up to the blade to confirm that I am cutting the correct angle.

[@realworldcarpentryremodeli5868]

Your attention to detail is top notch. I’m a carpenter/ remodeler for 30 + years and I always pick up little things from your videos.

[@StudPack]

Thanks RWCR 💪🏼 there are so many Finish Carpenters who we love learning from. Having the right tools for the job makes a huge difference.

[@DeeplyConcerned68]

Ok noob. If you been doing this 30+year you need to quit and get a new job bruhhh.

[@bondpit8750]

@@DeeplyConcerned68 That’s the typical know-it-all attitude that leads to becoming stagnant in your trade. You can always learn something new and you can always get better and more efficient. 👍🏻

[@geraldmucci1039]

One other thing. The way you two work together is refreshing to say the least. I think the secret is mutual respect for one another. That's what is missing today in our society. I love having my 19 year old grandson work with me as often as possible. My neighbour surprised me the other day and said he likes listening to us work together for the same reason you guys are a good fit. Thanks Gerry from Ontario Canada

[@caracolcaracolito6279]

It's cozy and fun 😃

[@MikeZMonroe]

There are some master carpenters on KZbin who demonstrate their crown molding measure /cutting/hanging techniques. Amazing how skilled they are but they do it day in day out. Stud Pack demonstrate How to perform very precise techniques to those who might occasionally use. I too like these guys for practical techniques and advice. Literally everything they do they provide a great tips!

[@216baja]

Great tips in your video, I’ll be sure to use some of your suggested tips.

[@markgarcia2430]

I stumbled on this channel looking for advice for my bathroom remodel and found it. Obviously Great work, but what impresses me even more is How Paul explains in EXTREME detail how he does a procedure and why...and the very small nuances of how to account for issues like crooked walls , figuring out old work that was hacked up, using make-shift tools when better ones aren't available and general problem solving all day every day. Paul is very thorough. Nothing is easy, (I was a mechanic, body man and painter for 40 years.) There's a ton of videos with very skilled contractors out there of explaining how to...,but Paul's teaching skills are by far the best (that I have come across). Just because a person is very skilled at what they do doesn't necessarily mean they can teach it very well. I like it when Jordan chimes in, he always has a good point to get across. I love watching your videos and coming away learning something. Also the editing, audio and camera work is up close, clear and dead on. That really matters. I don't know how you guys get anything done with all the precise filming. Lol. Stellar job Jordan and Paul !! Saints suck, go Ravens! Lol

[@IknowImNotCrazyYoumightbe]

My FAV Home remodeling channel.. on KZbin or TV..... The amount of details and knowledge i have learned from watching is fantastic.

[@MudjunkiesMS]

I’ve been a carpenter for 20 years and I still learn something new from your videos. Some very helpful tricks that could’ve saved me lots of time and frustration. Awesome work. Keep it up!

[@StudPack]

Awesome thx Bill 👊

[@LightOfReason7]

So neat how well you guys work together and have a good time doing it. My Dad was smart and did a great job but also very hard to work with. Such a blessing to watch you two

[@StudPack]

Thx 👊💪

[@johnleach4703]

Maybe you were the one who was hard to work with. 🤔

[@LightOfReason7]

@@johnleach4703 Yes, maybe so

[@csoborowicz]

Very beautiful work guys! Just a thought: When I've done crown I find it helpful to not fasten a piece of crown all the way to the corner until I install the next piece. By leaving a few feet free, I can roll the crown up and down to adjust my miter joint in the corner. That way, I don't have to shim against the ceiling/wall like you did.

[@tc96z1]

Me too…. 20 years ago.

[@Laval-59]

Agreed…. having the “roll” makes the corner fitting much easier..!!

[@ncinteriorsplus3520]

Exactly...

[@erichsh58]

What do you mean by "rolling" the crown?

[@ncinteriorsplus3520]

@@erichsh58 not having the crown bedded on the back side FLAT against the ceiling and wall on the 45 ° profile

[@atamagashock]

Really need a 12” compound sliding miter box. I know you said that early on, but it would have saved you a lot of headaches. Also if I could make two suggestions.. one always glue all your miters regardless if it’s an inside or outside. Also when running rooms over 16 ft, I use CA GLUE and pre assemble my piece on the ground. That way if you need a 20ft length you can get your seam perfect using that glue. I also back it with a strip of luan like 16 inches long to support the seam. Works amazing and it’s damn near impossible to find the seam after it’s painted

[@StudPack]

Cool thx 👍👊

[@mastersarge5488]

Been watching you folks for a while now and when i started i knew nothing about remodeling (old Army medic here). I just finished my first bathroom project and it was big. Designed and did the work myself. Don't think i would have even tried it if I hadn't seen how you two tackle projects bite by bite until it's done. Thanks for the videos and the motivation!

[@StudPack]

We love to here that MSG! Congrats on the finished project and here’s to the next one! 🍻

[@bob.walker351]

Wish this video was around when I did my whole house! The one trick I used, was a whole set of templates made from scrap crown. I marked each one "outside left", outside right", "Inside right", etc...kept them under the saw for reference, and as one who has had too many close calls....EYE PROTECTION....always..... Thanks for your awesome video's!

[@michaeldepow6663]

I've been doing it for a few years and still have my cheater pieces to reference when I have a ton of stuff on my mind 😆

[@Rich-hm9ux]

Fantastic instructions for creating a crown jig and also for how to create a crown stop for the miter saw! Really great video. Haven't seen a better video on how to do this!

[@KristopherChambers]

A super useful trick when hanging a wider crown like that is to cut triangle blocks out of 2x4 and nail them up. The crown will self-align, not have any wave in it, and if you place the block 6" or so from each corner your corners come together super easy. An old-timer I worked with for years taught me that method and I haven't hung crown on drywall without doing it sense, you always have a good nailer, you don't have to worry about cupped drywall and it just takes all the fussing and nonsense out of it.

[@bigbob9702]

CA glue: 1) Richard sells it on the KZbin channel “finish carpentry” 2) fast cap on line was one of the first with their 2-P10 system. I’ve been using that for years. You need that for any trim work. 3) Titebond “quick and thick” used to be known as trim glue. It’s not quite as good as the CA but I’ve used it in a pinch. Again nice work!!

[@Palinkat]

Saved my life installing crown on top of kitchen cabinets that were too close to ceiling!

[@Aepek]

Yep👍🏻 use fast cap 2p10 gel w/ activator (a fav) along with Ca glue thick etc… and not only does Rich sell it, but can get from Amazon usually.

[@nickkraft5932]

Ur a good man big Bob.

[@layth888]

also to add with regards to angle grinder and coping you can also just use a dremel tool. I find it much easier to use as well to cope

[@Z-Ack]

Yep i actually found that out myself on accident.. i got the 2p10 activator aerosol spray to use for hydrodipping.. you lay the hydro dip sheet on the top of a bath of water then you spray the activator on tge film and dip the thing.. works great. But had a bunch left over and i just thought hey activator activates stuff, i wonder if itll speed up dry times on super glue and yep, instantly dries.. you just gotta watch what you spray the stuff on though.. it will instantly make a sheet of plexy glass go limp or craze the whole surface and that cant be sanded out…. Will melt certain plastics and instantly dissolve foams..

[@randywl8925]

When coping, a Dremel tool with a sanding drum in it, is your best friend, especially with real wood that won't be painted. It helps you fine tune over cuts. Works great with MDF but it's dusty.

[@Titantitan001]

I’ve always used a fly wheel but I should try this for the more difficult ones

[@randywl8925]

@@Titantitan001 it's very gentle and you can carve in tiny increments to your line. Since you're working up close and personal a mask might not be a bad idea.

[@kelstra1997]

In almost 50 years as a building professional in Australia, I have never seen crown molding used. We use a plaster cornice - available in a countless number of profiles. The end result is identical in appearance. Plaster cornices are installed using cornice adhesive which is a very fast setting plaster.

[@coatknight]

Moulding is overpriced in the US. Unfortunately they don't have the plaster moulding around me. Polestyrene and MDF moulding is barely cheaper than pine.

[@Christopher_T_Paul]

I do this day in day out, mostly restoration work on old English homes, but some residential work as well. A laser is far quicker and easier. Back in the day, before laser levels were affordable, our choice of method was the good old fashioned chalk line. Personally I would advise again caulk, especially for gaps that large, filler has so many more advantages, you will get a perfect finish with little or no shrinkage and there are amazing fillers on the market that are flexible and very sandable within 24 hours. It takes a little more time, but well worth the effort. I highly recommend using adhesive alongside nails. The nails will hold the moulding whilst the adhesive dries for a beautiful bond for decades to come and no worries about expansion and contraction weakening your mechanical fixings.

[@matteberry58]

You guys rock. You may want to get a miter guage so you can measure the angle of the corners and set the saw angle to half of the measured angle. It helps get you closer to perfection. God bless you and yours.

[@lauranellburch9774]

The cuts are so good, there's nothing that caulk won't fix. Learned so much as usual... so grateful...

[@chuckkillawood8229]

Good clean, solid work, full of great tips, didn't learn anything new, but the attention to detail, and the father son relationship was just great. Finally youtube recommended something good. Tuning in for the next one. Subscribed.

[@StudPack]

Welcome Chuck! 👊🏼

[@Dinomitsios]

I install crown the same exact way. I do add some titebond in the miters though. Keeps them tight down the road as things expand and contract.

[@onewolfe44]

For us newbies I'm glad you had in perfections and show how to normally correct them. Looks good.

[@lorenjennings1127]

Your videos really promote common sense approaches, techniques and soltions to projects. Good verbal descriptions and dialog. Thank You!

[@coopertown7867]

Good stuff. My son had to go back to school after working with me over the summer. Miss him and the desire to go to work. Enjoy your time together guys! Love the videos!!

[@StudPack]

Thx 👊

[@TheDoranMaster]

Love the painting refference at 16:24 !! Great job as always guys!

[@jamesmunro9661]

I had to scroll waaay to far to find someone else that noticed this :-)

[@waynemiller6070]

Good timing. A refresher. I've trimmed only a couple houses. (a few years ago) I'll be helping my contractor friend next week. AAAGHH coming out of retirement for one more job!

[@AquaPeet]

I just LOVE how you work together and listen to eachother's inputs and really consider the other's insights and ideas!!!!! Wholesome and awesome. I had to get used to Jordan calling his father man and dude but he really does it with respect.

[@feliciar8056]

Great explanation and hands on examples. You make it easy enough for woman like me who love to remodel understand your method. Great work. Thanks for sharing.

[@StudPack]

Our pleasure Felicia 👍

[@mahmoodkhan6623]

I'm watching this one year later and still loving it. Great lighting, resolution, and music!

[@steveevers6668]

I may never install a crown molding, but your video was well worth the time to view. I felt like I was watching one of the professionally produced DIY shows one might see on Saturday TV, and that is a complement. Well done on the editing, the videoing, the content, and dad you missed your calling as an on screen personality...all well done.

[@OB1974]

Your tips are very helpful. As a homeowner that does a lot of my own work, you just made my next project much easier. Excellent job explaining and showing the specific details.

[@StudPack]

Thank you very much Bob 👊👍

[@oneway1811]

There’s only a handful of real trade man who take their work to the next level you’re one of them 🙌🙌🙌

[@chumchum2543]

Great video, I did the exact same thing you did.....I made a sample of my crown and used that as a guide....worked like a charm. One other thing I did was before the installation of the crown I painted all the pieces I was going to use, so when I was done I didn't have to use a paint brush above my shoulder (my shoulders aren't what they used to be), all I had to do was caulk the few gaps that I had (one thing I really emphasize is-the less caulk you have to use, the better the job) and some touch ups on my nail holes.

[@StudPack]

Cool thx 👍

[@eileenheitman4351]

Just came across your channel/watched/subscribes. Nice work, good descriptions/demonstrations. Your smiles are an extra bonus. I’ve been a carpenter/contractor for 42 years.....in the trades for 50 years. On occasion one of my 3 daughters helps on a jobsite. Ditto grandsons/grand daughters. Recently my 20 year old grandson began as an apprentice electrician. He tried college and was immediately turned off by the leftest bullshit. He loves his job and he’s on his way to great success. It has been wonderful to see him grow and learn. He has observed and learned about vehicle repair and maintenance at my side and will save thousands of $ over his lifetime doing his own fixes. He’s already talking of buying land and building a tiny house or a derivation of same. Proud of that kid. Dave Heitman dba Dave The Carpenter in Omaha. (swamped with opportunity)

[@krazietrendz]

hey sir i have been doing interion trim for about 15 years and never seen or herd of anything like this. this is so cool i love it thanks

[@maureenmc1]

I don't do crown molding very often . Im doing some today and a lot early next year. THANK YOU for the video Very helpful!

[@NathanBiden]

Nice work guys. One thing I do is use a coping saw for most of the cut and finish off with a dremel and sanding drum on low speed to get perfect coped joints.

[@tmx63]

Just did my first crown job this past weekend using your jig and, yeah, this is the way. Thanks.

[@chrismaines1285]

I used the two part CA on all of my kitchen base board trim and it turned out perfect. Good stuff.

[@richmargadonna2155]

I found CA glue on Amazon and tried it for the first time. It's incredible, strong and easy to use. Glues anything to anything. I use it on door and window case moldings. Make your cuts, glue everything together then install it.

[@michaeldepow6663]

Add tightbond 2 also then it will last forever

[@lorenzodipaola926]

As a meticulous jack of all trades master of none... I love the attention to detail you boys put in all your work. Great job!

[@StudPack]

Thx Lorenzo 👍💪

[@bretburt7317]

Attention to detail! I love it - from a fellow craftsman. If at all possible, I like to fill in the deepest low spots in the drywall prior to crown install. It minimizes the thickness of the caulking bead. Sometimes the joint is so big that it draws the eye. Not except-able to me. I've seen as much as 1/2" over only 3 studs. Unfortunately, this means refinishing to blend in the various areas that were filled in. Thus, the biggest down side is an added expense to the homeowner. It's all about communication and managing expectations.

[@captainjackson6135]

Best Video you guys ever did, been in construction over 40 years, learned a lot from this video.

[@htownblue11]

Great job as per your usual efforts. Crown is never easy especially if you’ve never done it before. Some great tips in this one too.

[@johnsbard6122]

Love watching you two work together.

[@scottwaters8574]

Looks great guys! I always wear eye protection now with a brad nailer or nail gun. A coworker hit a nail in a stud, and a brad bounced out into his cornea. The odds are very, very low for that to happen - but I can’t get his mismatched eye colors out of my head (cornea transplant from a cadaver!)

[@robertpendzick9250]

And here, although nails sometimes bounce out, getting hit with a run away air hose would be no fun. He was right in suspecting that the nail gun was dangerous from both ends.

[@cantalapdance]

Nice to see the experience being shared with the younger gentleman and how attuned to care and detail the younger dude is showing.

[@StudPack]

Thx Bob 👍

[@Arizona_Stonah]

I’m a 56 yo man who lost his dad at the age of 2.What I wouldn’t give to have had him around to do projects like this.I love the bond you two have with each other.And it just so happens you guys know what you are doing! I get to live vicariously through Stud Pack….and that’s okay with me.thanks guys.

[@javiergalvan242]

Another great video Paul and Jordan, we all know there is no perfection in anything or any person (only one), but you guys try to get it as close to perfect as possible. Great job the house is looking awesome, remain blessed and keep the video's coming!!!! :)

[@StudPack]

Thanks Javier! 💪🏼

[@brucegezon]

I like it when you show how to solve the problems you run into like shimming to align the trim when ceilings are uneven. Also your fixturing techniques and how to locate and mark your studs for nailing. Do you ever glue your joints?

[@briank3564]

Love your jams. Somebody is a big fan of that little band from down under. Would love to hear more of your guitar work. Thanks alot for the crown tips and tricks as well, will add to my knowledge base. Rock on.

[@50sKid]

Last time I did crown I actually used a protractor to measure the miter angle at each corner and wrote that on the wall and then adjusted my angles when cutting. Most were 44 or 46. But then again I have what must be the worst framed building in all of history, so it didn't do much good in the end. No studs were crowned in the making of my condo. The walls have waves for days, man. Nightmare.

[@pandagold4722]

Plumb and square people!

[@renaissanceman8581]

Most walls after mudding are 44-46 degrees. That is so close a 45 will work without a gap showing. Especially on crown moulding where there is only one small contact point on the wall. The ceiling being level is the bigger problem with crown.

[@CoNaana]

Haha, my house is crooked and even the walls are wavy. I would be so glad to have even one wall be at 44-46 degrees

[@THExLAWxMAN]

My house was built in 1955, I ran crown in most of it. The walls are wavy, the ceilings are not flat and the guys building it then used the worst of lumber material and probably drunk. Did it with a 10 inch running 3 x 3 crown. I found using dap caulking ( white ) in a squeeze tube works great at filling small gaps and helping to keep it in place. After you wipe away the excess, it looks like one piece.

[@millsm43]

Wavy wall call for mural of a lake or ocean. Everyone will love the 3d effect! Lol

[@FrankSr1st]

Protractor is the way to go...did mine a few years ago...for a novice, it came out pretty good. Great job Stud Pack!

[@DM-pl8mz]

Great vid. Great tips. I have a 12" double swing miter saw that works well but, its a bear to carry and set up so i usually cut my crown on the flat from back using a batt' 5.5" circular saw set at proper bevel and cut at proper angle. Then i nail off with 18 ga batt' nailer, caulk and finish coat with satin sheen paint as i go so to only move scaffild once. I work alone and fly through it quickly. Been at this for 50 years and no plan to retire completely from the trade. The 2 part glue is a help sometimes but, so is power grab instant set glue sold at lowes & home depot.

[@JT_70]

Mine is on a folding cart with wheels. The 12” saw is still heavy but the cart is a great stand and makes moving the saw around easy. I have a Rigid that I got on sale at Home Depot that is perfect for my big DeWalt miter saw. It’s easy to fold and un-fold and roll around.

[@FlatEarthMath]

Excellent video. I love hearing your narration; using the correct technical terms for everything really is helpful for someone like me who only knows a fraction of them. It helps me learn, in context! My only criticism is the fact that you didn't publish this video one month earlier, when I was doing my kitchen's crown molding. :-P

[@StudPack]

Thx 👍👍

[@MicahFunk]

CORNERS can be tricky, but here's the method I use that may help you. The first thing I do is cut a short piece of plywood that is the correct dimension for the crown placement on the wall from the ceiling corner. I do similar to what you did in marking the wall using my cut piece of plywood, but I only put a small mark every couple of feet. For me, the marks are not absolute but more of a general goal of where to place the crown. The true placement of the crown is derived from the corners of the room. If I'm installing crown in a left-to-right direction around the room, then I keep about a 3-foot piece of crown that is cut to mate with the piece being installed into the corner. I adjust both sides of the corner, making it higher or lower to achieve a tight fit of the miter. This is where I nail it. Sometimes it is dead-on the mark on the wall, or sometimes it's off by a 1/8th". Doesn't matter. Now I adjust and nail the crown along the wall using my marks as a guide, with the most important consideration being how well the crown mates up with the wall and ceiling. I find this process allows me to do a first-rate crown install on subpar framing, drywall hanging, or drywall finishing. Oh, and I generally install crown without a helper. I use a trim board cut just long enough to lean against the wall and support the other end of the crown at the approximate height. I've become very proficient with this method and can quickly install crown and be precise for a beautiful job.

[@tedspens]

The marking jig is simply brilliant! I'm stealing that idea 😎 but I'm gonna relieve that outside corner because ceiling joints aren't always perfect. Thanks for the tip! Next time you do crown, or trim... pre-assemble as much as you can. It's the best way to get perfect joints, especially for outside corners and skirt joints. I take the time to assemble as much on the floor or workbench as I can, then nail it up and fill in the rest. Jordan, tell our dad to get a bigger saw! 😁😆 Great video as always!

[@dubmob151]

I was wondering about that, as any ceiling to wall joints less than perfect would obstruct placement of the jig unless the tip of the jig was rounded off to allow for it-

[@cjsawinski]

I’ve always just marked my saw fence and base with a pencil reference mark for cutting nested. I like being able to roll the nested cut for fine tuning the miters/ copes. I also miter and pre assemble as much of my inside miters as possible (if the crown is large enough, you can just use blind screws from the back side). Pre assemble the miter section on the ground and put it up as one big piece.

[@stevemulcahysr2861]

I just found your KZbin channel and I want to tell you it's great. You explain things in layman terms without a lot of bull. Keep the great work.

[@StudPack]

Much appreciated Steve 👍

[@rogerweaver7686]

if you allow blade to come to stop before raising it will lessen change of backside tear out.

[@stoneystunna4070]

I always enjoy your videos. The Father & Son comradeship & teamwork is great. Building a great relationship while building each project is awesome to watch. Respect ;). I wanted to tell your son to be cautious using any type of nailer whether finish or Brad nailer ricochets can happen & safety glasses would be a good idea when using any nail guns. I know a lot of carpenters do not like to wear them but wanted to at least bring up that ricochets can happen if a nail hits a hidden screw or framing nail or hidden metal behind drywall. I always feel like I should say something because if I don’t maybe I will regret it. ;). I definitely do not want that & with some do it yourselfers watching videos might be a good thing to mention to viewers of your videos. Continued success to you both 😁👍🏼👍🏼

[@TheMadawg67]

I've been doing construction a long time now, but I never quit learning, thanks for the info.

[@lil--mo2025]

I love carpentry! Really cool to see father son collaborations! Great work guys!

[@blaketodd1208]

my favorite mitre saw....framing finishing everything the old 12" dewalt....they are bomb proof

[@whiskeycreek4038]

Your 90° jig might be rocking on the ceiling/wall because of the drywall mud build up. Could be skewing your lines slightly forcing you to roll the crown to get the miters right. Maybe try to clip the long 32" inside corner so it fits a little tighter. Awesome job!

[@blondegerman4461]

Brilliant video! I cannot wait to start my project. Needs to be cooler in Texas first. Thank you for posting. Stay healthy. 😀🙀

[@erickjason9092]

Excellent videos. Great smile. easy going. Very enjoyable to watch.

[@greglenoir8363]

First timer and liked the music, dialog and camera work most of the time. Good job all round.

[@StudPack]

Thx Greg 👊👍

[@garymucher9590]

We decided to redo all the molding in our house after repainting. And in doing so we decided we liked the rounded outside corners too. Installing base, chair-rail and crown takes on a whole new meaning. But it is doable if you take your time. Everything came out great...

[@TrashyLobster]

Great work guys. I just trimmed out my house. Not a Proffesional, but let me tell you, a lot of back-n- forth to the saw. 😂 Wife finally got to see what all is involved. Turned out not too bad for a weekend warrior. She’s happy and that’s what counts. Keep it up guys, love your videos. 👍🏼

[@billdaniels3179]

Really enjoy your show its fun to watch people dont relize how hard it is to cut and fit that stuff i,ve done a lot but i aint no master at all . I think it takes a lifetime to get good at it .you guys are doing a bangup job now

[@terryb3388]

May i humbly make a suggestion? I'm 72 yr old and am a crown master. I measure, cut, cope and install by myself ... that's another story. I have come to discover that if i use a Japanese chalk line (very thin, with pin) and connect all the bottom references and install on said line, it becomes the line you see when you walk into a room and all potential waves disappear. After my corners are set and secure, i then push and fasten the top of the crown. I think you guys are "This Old House" on steroids! This old Dog has learned new tricks from Stud Pack, be safe and keep going!

[@tevetorbes456]

Excellent video. Bonus rocking backing track toward the end. Good stuff

[@roomwithaview4195]

Beautiful job guys! 1 little helpful tip. When measuring a long wall, instead of using a tape measure to measure the length of the wall. Make yourself a 100 inch stick. Put it on the wall at the ceiling, one end in the corner, mark the other end, measure the remaining length, and the to together

[@jamesec1949]

First time watcher. Nice job guys. I subscribed.

[@giannibadeau3344]

Great tips, i like the block idea. I used to just measure down. Really need to carry a magnet with me. Just this week working on a kitchen install, crown on cabinets was different that crown on walls, would like to see your tips of bring two different profiles of crown together? I scribed and worked the pieces till they married well. But would love to see your take on it. Thanks Great channel. 56 been doing this my whole life, still learning. Thanks again

[@ralphsullivan8972]

Very nice job outstanding craftsmanship. Thank You for passing on your tools of your craft.

[@Hugh213]

Great vid. I’ve tried numerous times that resulted in worthless srap wood. Finally got it viewing this vid. 😊

[@tonydavis6487]

Just a little tip for baseboards... I have installed a TON of baseboards and I VERY rarely have to cope a corner. Get yourself a Miter Saw Protractor. I have an aluminum one made by Saker...it was like $20. Gives you perfect angles with no gaps, everytime!!

[@mr.wizeguy8995]

That jig outer corner would be better to plane little off because corner where wall meet ceiling usually isn't chisel sharp so jig doesn't necessarily go far enough into corner.

[@Aepek]

8:13 the other thing about making your own crown jig; don’t have to deal/mess with the ones that come with miter saw…..which can be bad, really bad, usable, and ok😉. IMO, and think for most ppl who do crown often; they have their own jig and method “to the madness”😁 This entire job has turned out great, did awesome job on the beam, transitions, and the countertops 👍🏻👍🏻. Very nice✌🏻

[@georgiafan6618]

I make separate smaller pieces to mark top and bottom of crown projection on wall/ceiling and mark it laboriously. Your jig is much better idea! Gonna try it - thanks! The cordless oscillating tool is killer for the shims - love that thing - works so fast. 👍

[@georgiafan6618]

PS that double beaded crown is pretty and I learned that the MDF will mess with the cope. Sucks. I miter the corners too. I pin nail (1-3/4”) the crown a few feet from the corners. Holds it up while allowing me to move the piece a bit to get that miter tight.

[@tomjeffries58]

Some people do test cuts for mitering such as 44° of 46° other tricks are to move the corners up and down to fit. Instant thin CA glue will seep in to joint and dry in 5 seconds.

[@davidhedquist7538]

I enjoy watching the youth learn from a master. Oh how he is blessed 🙌

[@bill4123]

For super wavy walls and ceilings, I do a 3-piece crown by ripping base board and using the profiled part upside down as a nailer on the wall and the square part as a nailer on the ceiling. It helps give you a few extra places to hide the waviness.

[@theprofessorfate6184]

4-1/2 grinder with non-segmented diamond blade is the a dream for coping mdf.

[@hondolane1]

Good idea on your jig. I have used similar jigs marking the walls and ceilings but not at my saw area. Very seldom have I installed crown that is small enough to use it that way. Coping has been the norm for me. Good video.

[@gunrunner35]

Nicely done and loved that I learned a new trick! Thanks!! Keep up the great work.

[@garyK.45ACP]

Several years ago, I did a boardroom paneling job for a corporate office board room using walnut veneer plywood and walnut trim and custom milled walnut crown molding. Not wanting to have an expensive "oops", I did this exact thing for the crown molding and it worked perfectly. If you use that crown frequently, you can mark your jig for that crown profile. Large crown is one reason I use a 12" slider

[@garyng5662]

These tips are great! That line/jig tip is also great because it helps you identify and correct slight imperfections in the material… you may not notice those imperfections while installing if you didn’t have a reference line. You’ll definitely notice them after having a chance to step back and look at it. Ever have problems with the sharp corner of that jig throwing off your line? I’ve installed a couple rooms of solid oak crown… solid wood is almost never perfectly straight. A laser level was helpful but your suggestions would have made this so much easier. A level doesn’t guarantee the ceiling is straight and level. The stud marks are also a great idea. Do you guys ever glue the joints on crown? I heard you talk about CA glue, but didn’t know if you used anything else currently. If not, ever have problems with joints pulling apart? Very well made video… I’m saving this one. Thanks for sharing!

[@tomstclair961]

Go to hobby lobby or any big hobby shop is loaded with the CA glue and activator spray.. now I use the thin CA.. they make some thicker. I carry both but mostly use the quick thin CA .. I always put mine together on a good smooth concrete floor if your able the night before installing. Some of my glue up splices might be a 35 ft one piece . All sanded on the face to match and ready for paint. Easier to do on the floor . Might take 4 guys to install it or to tac it in place but it's worth the extra little bit . Its a flawless seam. That won't ever separate or crack if done correctly.. NOTE**. Always put a structural cap of a thin material over splice on the back and let it be at least 6 inches on each side of seam to really give that joint support. I use two part epoxy 30 or 45 min. On the bulk of the material I'm glueing on and then leave a few areas around the edges to quick stick it in place with CA and activator to kick it off quickly. I always keep a sheet or two of 1/6 inch marine ply.. 12" x 36"" sheets for hobby projects. Boat building material or airplane. It works perfect to strengthen that splice cut on crown.. little expencive but strong as hell for it's thickness.. Ok gang good luck. Great video. 💪💪🇺🇸🇺🇸

[@dustinknight1063]

You guys do great work. Not sure if you know this but you can cut crown flat if you set your bevel to 33.9 and your swing to 31.6. That's how I do it now and it's so much faster and easier. Just a tip awesome work either way.

[@chrisking7295]

Finally someone who does it the right way

[@patsmith5947]

Yes you do wonderful work I wish all carpenters did as good of work as you do.

[@rickrobinson8551]

I just use painters tape on both pieces and super glue between the painters tape. Yeah I have to hold it a few seconds, but it’s cheap and always available. Holds great! Great video, thanks!!

[@samuelbowles3054]

Great job guys! Just something that I picked up along the way. Sections of ceilings that don't have trusses to nail to. I put a nailer strip back behind the crown with a back chamfer to not interfere with crown. Although liquid nails is probably cheaper than a 2*4 these days haha.

[@StudPack]

Cool idea thx 👍👍

[@norrisonian]

Finish Carpentry TV KZbin channel helps me with crown moulding but yours worked out good too!!!

[@doninsalaco5018]

Excellent video with well detailed and thorough explanation.

[@JeremiahL1616]

Usually 1 of the supply houses for fine trim will usually have it. In our area there is only 1 place in a 45 mile range to get it from. Its CA glue!