This Square Body Build is EXHAUSTING | Bar 7 Ranch

[@mazterchal8342]

Cody is so cute.. u guys are such a happy family. May God keep blessing u guys ❤❤

[@SabeloMahlangu-z2o]

This is not only about build a square body but a father and son bond❤ I see

[@Bar7Ranch]

100%

[@robertaustin-y7j]

@@SabeloMahlangu-z2o hell yeah you ain't going to get no better time than that father and son

[@Buie144]

Looks exhausting! Keep it up!

[@Bar7Ranch]

Thanks! Will do!

[@mariofiref]

That transfer case should have a support bracket that threads to those two large threaded holes and to the right bottom bell housing bolt at the front of the transmission. That will help with keeping it from leaking at the transfer case adapter gasket and I recall help keep the transmission bell housing from cracking.

[@steveddavis]

That level of restoration is MAJOR work. However, the time together, the skills learned, and the finished product that Clancy will be able to say he did are forever memories! Keep wrenchen 👊

[@Bar7Ranch]

Right on

[@dawnkangas2968]

Awesome as always great job working together

[@Bar7Ranch]

Thanks again!

[@Sherry8172]

Hi, the Walkers sent me over. Looking forward to watching you. God bless.

[@Bar7Ranch]

Hi Sherry! Thanks for coming over!

[@lindahipp8329]

Looks like y'all doing a good job. GOD bless y'all.

[@Bar7Ranch]

Thanks Linda!

[@seanmoss2053]

awesome video guys!!!

[@Bar7Ranch]

Thanks so much!

[@seanyancy1809]

The joys of headers never ends until you realize the cast iron headers are good to 4000RPM and you put them back on. Can hardly wait for the stereo installation and nobody needs 10inch subwoofers in a cab that small hen a pair of 8s will sound better and be easier to drive. Alpine components for the long run win. Keep! on wrenchin!

[@Bar7Ranch]

Sounds system installing happening next weekend (for us)!

[@phillipbecker4393]

@seanyancy1809 I had two 10inch subwoofers in my 92 chevy step side it sounded great. I had it professionally installed because I didn't know what I was doing. Lol

[@joehomanick]

The amp for the subwoofer needs to have its own wire . You can use a 4 gauge from the battery with a fuse as close to the battery as possible and that runs directly to the amp or amps . As for light bars or auxiliary lights you can run a 12 gauge wire from the battery to a fuse block and that can feed any lights or accessories .

[@richardreed8091]

Yall did a great job on the headers ,and I absolutely would use a fuse box where you said ,it's perfect and will keep a clean look .❤❤

[@Bar7Ranch]

Thanks 👍

[@robertmcdonald6468]

Definitely put a fuse block on it will make things so much easier i have a lot of stuff up over the years

[@marvawood2758]

Found you from the Walkers tonight. Look forward to watching you guys too.

[@Bar7Ranch]

Thanks for coming over and saying hi!

[@gaylenrussell5793]

Little hint Cody. Dont use that plastic tubing for the oul pressure gage. By my past experiences they always leak or end up rubbing a hole in it somewhere. Use copper tubing that way it can be pulled up off everything and you dont have to worry about a hole being rubbed in it.

[@phillipbecker4393]

That's a good idea for that fuse box. Keep everything clean.

[@Bar7Ranch]

Thanks 👍

[@brian_2040]

Good day y'all. I had a 83 Chevrolet Scottsdale. The only trouble I had with that truck was the dang collector gaskets blowing out and leaking. I was able to get a aluminum gasket that lasted longer than the others. Nice truck y'all.

[@Bar7Ranch]

Awesome

[@JamesSoell-f2e]

Saw you guys on Walker family farm, came over to check you guys out,so far so good.

[@Bar7Ranch]

Thanks for coming over and saying hi!

[@Smokymtnfaith]

-7 Family prayers 🙏 God bless from smky mtns of NC

[@Bar7Ranch]

Thanks!!

[@MotoJake55]

I love these videos, me and my father just started a new project, we are fixing up a 1994 honda shadow 1100cc. Its always fun to do this type of stuff.

[@Bar7Ranch]

That is awesome!

[@JoshuaGoldman-s5t]

The amp for the subwoofer is going to need a dedicated power wire for its self other than that you could make you’re own fuse block or power distribution block the radio “should” have its own factory wires ran don’t cry when you have to cut the dash to make the modern style radio fit if you don’t go with the vintage replacement

[@robertaustin-y7j]

Just keep on ranching

[@Bar7Ranch]

Always!

[@Logan7P88]

Looking good! I sent ya a link to a 80 model k30 crew cab on the blue app.

[@Bar7Ranch]

Cool, thanks!

[@jaredspear8140]

Cody just fyi, we have a 69’ Nova we drag race. We upgraded our coil and plug wires a year or two ago. The guy who sold us the stuff from Fire Core said NEVER put those boots or sleeves over the spark plug boots/wires. They can catch fire! I didn’t realize it either but he warned us it would happen at some point!! Fuse block is a great idea, it does clean up wiring. However I’d place it inside the cab. He will be daily driving in rain, mud, etc. It’ll keep it dry and keep you from chasing wiring gremlins as much!

[@mikebonge7206]

Look for auto fuse block I think you have to have a fuse and relay going each one of add on. Sun woofer amp all those add on. To keep them from overheating. Look at stereo equipment rig up also

[@NickJames-f2q]

I built a 1977 Chevy pickup and I had the exhaust on within 30 minutes straight out the back two pipes

[@ohfknowned239]

You could have wrapped the last part of pipe after bolted on I had to do that on mine and worked fine.

[@j.j.clingman4083]

Cody you definitely want to soak your header wrap in some water before installing them onto the headers for sure!!! By soaking the header wrap in some water will help make it wrap up nice and tight and look much more professional done!!! If you don’t soak it you will definitely not be able to get it as tight as if it was wet!! Just saying!!! Even if it says no need to soak in water I still soak it in water and it helps out a bunch!!!

[@North_Texas_HeartBreakers]

Go kicker speakers all the way. I'm 41 and that's all the guys in school ran back in the day. I was poor and could only afford pioneers lol.

[@Bar7Ranch]

Ha! Feel ya!

[@downunderfulla6001]

She doesn’t love you 😂😂😂 You’re doing a great job on this build🍺🍺

[@Bar7Ranch]

Thanks!

[@markbusey1593]

Cody you couldnt finish wrapping the header once its installed?

[@dennismartin6304]

You can install a bus block on the fire wall to run all your hot wires from.

[@karenhoward7617]

Hello, I saw you on the Walker Fam channel 🙂

[@Bar7Ranch]

Thanks for saying hi!

[@hearourvoice5495]

Walker family sent us ❤

[@Bar7Ranch]

Thanks for saying hi!

[@CadeMccoslin]

Clancys having a hard time learning with things you can’t teach let him learn

[@CadeMccoslin]

You can’t take the credit for what he’s done by explaining what he done

[@Bar7Ranch]

What?!

[@AZJH8374]

I'm looking up your other channel. Keep prayin', & it won't come up for me. God bless you all and many prayers 🙏🏻 Nurse Judi in Scottsdale AZ and Eucharistic Minister 🙏🏻

[@Bar7Ranch]

www.youtube.com/@KeepPrayin-jv8hv

[@LGHomestead]

I don’t know anything about all of this so I have no advice. Just sayin’ hello 👋

[@Bar7Ranch]

Well thanks for stopping by!

[@kathypippins7168]

Cody sure is losing weight! Erica, I am sure you are as well, but we never get to see you. Of course, Clancy needs to gain some.😊

[@Bar7Ranch]

Thanks Kathy!

[@NickJames-f2q]

If you would have ran that engine they wouldn't have come right off

[@ValerieWhite-c5e]

Hey doing what up to date is it's ur pickup are ur old way its 2024 stopi

[@NickJames-f2q]

You're making it too difficult running to exhaust pipe straight out the back

[@mazterchal8342]

Cody is so cute.. u guys are such a happy family. May God keep blessing u guys ❤❤