This Stryfe Clone claims to shoot Warheads Please be safe when Purchasing!

In this video I review the SnowCinda Stryfe Clone. I unbox it and see what it comes with. I even get some chronograph readings and do an accuracy check.
Buy one today with my Affiliates link!
amzn.to/3wym2OT
It takes long hours and a lot of Coffee to run the DrFlux Channel! Buy me coffee to keep the Dream a reality! www.buymeacoffee.com/DrFlux
Buy Official DrFlux Merch Today!
teespring.com/stores/drflux-o...
Other Ways to support my Channel:
My Patreon: / drflux
My Patches: silverfoxindustries.shop/coll...
Fan Mail Box:
DrFlux
3377 Bethel RD SE Ste 107 #800
Port Orchard, WA 98366-5608

[@Boomstickmods]

Having more “Stryfes” available is nice so that’s definitely a plus

[@arftrooperksd7784]

It is always great 👍 with so many Accessories and darts

[@carrieromberger8640]

Also no metal energy blocks down the drain

[@Excaliburumbra801]

" *S O F T M I S S I L E W E A P O N L A U N C H E R R A P I D F I R E E X P L O SI O N* " - Nerf Gun copy i found once

[@datastorageable]

Can't wait for you to mod it and how it will look like with your brand of colours.

[@sampersonguy5337]

The thing I like is 1. Stryfes on the market 2. Even if the performance is ass it should take stryfe parts so I’m hyped

[@JohnJames.]

When I was making bathtubs, we could rip off a design, if we changed it by ten percent, so if there was a tub with a smooth bottom, we'd just add texture to the floor , and call it our own... Greasy practice , fun review

[@The_RC_Dude]

1:53 Box: "Open warehouse door..." Flux: "This thing's got a warehouse door? That's crazy" Box: "Clean up stuck bullets" Flux: "Oh my goodness this thing takes bullets?! Well, that's unfortunate." I don't know why, but that made me laugh for a good 30 seconds, that was the last straw, you've got a new subscriber!

[@schmollioli9474]

I need to see how moddable it is before I pass judgement on if it’s worth it. Also, I would like to see hasbro just reuse stryfe cage geometry. I know sometimes that’s not an option based on the blaster’s shell, but if they reused the stryfe cage geometry in thinks like the Rex Rampage, or Halo MA40 (I know cages have been developed for the MA40 now) that would be so awesome to easily drop in a cage to those blasters right after purchase and be ready to go.

[@jameshager1948]

This snowcinda internals are an exact copy of the stryfe

[@ima_bread]

Good point

[@Lankythepyro]

I'm keen to see how modding goes on this thing; I wonder how overvolting affects that fire rate. It's also interesting it gets inconsistent velocities even with that slow fire rate. Those accessories and an empty shell alone probably make it pretty good value.

[@nicholasmazzarella2720]

Dr.F Super awesome video. Thanks for showing off the off brand blaster. Keep up the great work. You rock.

[@drflux]

Thanks for watching!

[@deleteduser3455]

Funnily enough I love when 3 round burst only fires all 3 when I hold the trigger down it makes it a proper middle ground between full auto and semi auto

[@deleteduser3455]

I have one of these for home defence having a semi automatic warhead mininuke launcher is handy in close quarter self defence

[@smittzero8463]

It's a shame that they didn't go all out and give us functional N-Strike rails in addition to the picatinny. An orange piece for the N-Strike barrel would have been nice too. But this looks like a fine alternative to the Stryfe if you can't find one or want an autoStryfe with no other performance requirements. The price is fair too, seeing as you get a load of darts and attachments

[@troythetinkerer]

I've been looking at the various versions of these and I like them. It's Modding Fodder for sure.

[@vitodambra72]

I got one as well and i put a small 3s vemon battery and it woke it up quite a bit, you definitely see the difference. Great video doc! 😉👍🏼💯

[@crummyautumn]

That's cool if the battery replacement improves performance would definitely make it worth the buy

[@strangethursday]

Mine runs on a 2s now. It made a big difference

[@Montisaquadeis]

@@strangethursday Is the firerate still as sluggish on a 2S?

[@kduncan1981]

what's really important is, can the internals support the same modding equipment as a stryfe? can it house the flywheel cages made by the community?

[@ianfarquharson3772]

This is a great blaster to get to mod. Love that it's compatible with all the existing parts that are readily available. TkEZ>UK

[@gunmasterdude]

This is the only stryfe I would buy. It has more potential than the original one.

[@TheRealLemongrab]

I saw this on Amazon and was thinking of getting it, it looks good

[@Cerealwoken]

Pretty nice!

[@colelacey2875]

I bought that Black kit for my Strife off some random Chinese site for 5$ Canadian. After 3 months and we'll forgotten about it showed up and it's not to bad

[@vf1skull1]

It will take a Strife cage but you have to gut the O ring cupholders that are behind the motors. The stock motors are horrible and even when maxed out you can only get 80 FPS out of them and the will start to smell. You will quickly learn with this blaster they are the 1st thing that needs to be replaced along with the wiring. If you can get one to take to 2S and keep the select fire without burning out the board my hat's off to you because I couldn't figure that out. I had to do a lot of trial-and-error testing since there such little information out there on modding one of these. I've also noticed the barrel is just a hair smaller in outer diameter than a worker barrel so a little sanding may be required to fit one. Also be very very careful when you screw the thing back together. The plastic is a little softer and it's pretty easy to gorilla fist the screws. If you have any questions on mine or want to see the build please feel free to contact me. I think I was one of if not the 1st guy in the United States to get one of these snowcinda/holiky/qhx bootlegs running on 2S.

[@xinixini1826]

There was a question on the Amazon page, not sure if it's for this specific brand, but it was on the blue one. Basically, they wanted to know why it couldn't ship to them somewhere in California and they might have been unaware of the toy blaster laws down there. In short, Amazon was not allowed to ship it because it looked "too real". Edit: it was the Holiky M416.

[@martins_alternate_universe6783]

This blaster, or a very similar copy, can probably be purchased from an Ali Express seller, who might ship to CA. The actual cost + shipping might be higher, and the wait will definitely be longer, but it might be the only option for some buyers. I bought a belt-fed, full-auto blaster (very realistic profile; no orange markings) that Amazon wouldn't ship to CA. A bit pricey, and low velocity/range, but it's still fun.

[@benjoamurao]

I purchased this also 2 days ago. Should be coming in tomorrow. more bang for your buck. :)

[@sjschauer4235]

Would like to see the interior and what the internals are, see if it can be easily upgraded to a 2 or 3S lipo.

[@BishopGantry]

You usually dont get a Stryfe for the six rounder dart mag, generally have less and less issues with knockoffs the more the parent company uses underhanded tactics to stifle competitors, engineered to break, and intentionally making something harder to repairs.

[@strangethursday]

I just rewired the m4/16 version. I screwed up the select fire board rewiring it & had to run it like a Hyperfire. Full auto on a Turnigy 350mah 2s that fits in the tray. MUCH improved. The cage is exactly the same as a Stryfe. I plan to get another one & try not to kill the select fire.

[@strangethursday]

The stock motors burned out pretty quick. It now has Meishel 2.0s & is hitting over 130fps. No idea on the rate of fire but, it's fast. By comparison, my personal OOD Valyrie motor'd 3s Stryfe hits slightly lower FPS but, is more consistent. Fun experiment though. Next!

[@RetroAlex125]

Yo do you have any in depth modding videos for these types of stryfe knock offs? I am interested getting a cheaper alternative but making it perform better as it struggles alot with fire rate and power

[@hudsonfeely207]

ngl you have some pretty good video quality. I think you should have more subs.

[@HenryAird]

I got one Stryfe clone that had the stock mount and magwell redesigned so it wasn’t 100% compatible with stryfe mods but dual volted easy. I ordered one of these snowcinda ones and it won’t dual volt.

[@BlitzMekanika]

They get full points for calling it a Magazine.🤗

[@susanyoung6145]

heres a funny story the og hasbro guys with the magstrike a mag and ell the real nerf mags a clip so they got it backwards and new hasbro is too lazy to change it

[@krazykat7208]

This came out as I was looking at it on Amazon

[@Matt-md5yt]

Man they also like to take worker kits for their products, alot of them do it's crazy and crazy translations

[@channelmachinebroke9638]

Can you do a video looking at the internals? I want to know if we can mod these the same way as genuine stryfes

[@dzpdave1649]

I'd love to see you mod the internals, great video

[@trentencraig5622]

You should lipo mod it and give us a guide

[@FurryPlayz]

I managed to find 2 of these at goodwills and I was genuinely shocked at what they had on it compared to a stock stryfe. I mean it does shoot the same as regular nerf but lypo compatibility AND a selector switch right out of the box. That’s something that we could only dream of nerf coming out with

[@Pyano-ql6bv]

They do now, it's just stupidly expensive.

[@carrieromberger8640]

It’s not that expensive

[@Pyano-ql6bv]

@@carrieromberger8640 it’s ok compared to 3D printed fly wheelers but it’s very expensive compared to anything Dart Zone makes.

[@Terminatorbart]

Cool!

[@isaacoravetz595]

Hey... I got the same one!😃

[@rafan2647]

Can you put a stronger battery to make the firing faster

[@alexmarin8727]

I’d love to know if you can throw a 2s in it right away without rewiring and what that does to the performance if it does work. If so, I might pick one up (might be hard to justify over a Spectrum tho)

[@egg_timer]

I tried exactly this and sadly it doesn't really work. The flywheel motors will rev but the little PCB that controls the pusher does not seem to handle more than four volts.

[@walfoolish]

They probably have the 3 round burst the way they do for realism. That is how actual 3 round burst firearms function, it's just less noticeable due to the firerate

[@theelderkine]

I came here because as of today (02/17/23) this is on-sale on Amazon for $17.77

[@whoareyou98]

Hey Dr Flux, can you do a modification of the dart zone villainator.

[@Grismane]

FOCUS.....wow

[@The-Real-Lego-Cell]

There is a mp5k version and ak and m4 for this to

[@collinsimone2536]

The box gives off the Milwaukee tools vibe

[@paullassahn4641]

Please let me know if you can get this to run on 2s. I have basically the same thing (holiky brand from amazon) in AK47 and m4 style. I put in 2s and it would not work (overvolt protector?)

[@koolBOY8323]

i think anyone that's looking for a stryfe is likely going to mod it anyway, so the availability of more shells is welcome, as is the furniture. the internals and the battery leave alot to be desired. the amount of darts this comes with is crazy. hasbro could take a note or 10. I couldn't really tell, are the 'elite' darts FVJ's or actual elite clones?

[@drflux]

agreed! unfortunately they were FVJ's

[@whossmarco]

hello:) i bought this just to use it on my standard stryfe, because in my country there's no way to buy a worker mod kit, i just wanted to know if its worth it for what I paid which was like 20USD

[@colton1325]

I like how it isn’t even a MP7

[@Steve_5000]

Can you put this cosmetic kit on a original stryfe?

[@ToastedCerealz]

The casing of that off brand blaster is so similar to nerf stryfe they just include the 3.7 v rechargeable battery

[@nostalgiatrip1]

It is nice to have more options, but. For the price, get a Spectrum.

[@smiley8667]

Where is that stock from? You said it was your but is it from another gun or something 3d printed?

[@moorishentertainmenttv3514]

pretty good i would say

[@vwbuschick6124]

I kinda wanna buy this just for the attachments tbh

[@Rosadesu]

I wonder if the body kit works it’s a real stryfe

[@digitalben420]

Actually looks pretty cool... keep us posted on the rewire and throw some krakens in that bad boi while you’re at it!

[@tylerdavis6389]

Is love to see a compilation and comparison of the most popular stryfe rip offs

[@randomgaming2289]

Hey nice video is there going to be a mod guide on this ?

[@randomgaming2289]

And also is there any locks in this nerf gun?

[@ollutv3415]

you need to open that up

[@ivertrionnicblazingwell1757]

I kinda miss the wheel of blasters :(

[@castelatus]

Where did you get the butt that you put on the back cover? (I'm not a native english speaker, I hope you understand what I wanted to say).

[@Windle_Poons]

I just read the amazon reviews. Amusing... 'have AA batteries on hand' 'has good air pressure' To pull out a couple...

[@tamedna]

It was kinda nice so I got it

[@jonathanwu2833]

Isn't this just the qhx blaster? Same attachments and everything. Last time I went to china we had these available under the brand qhx

[@jonathanwu2833]

They have their own proprietary internals(pile of shit, both of mine broke after a few months), trigger is electronic which causes a delay between trigger pull and shot. The top rail is enlarged so standard nerf attachments don't fit. You can't add a picatinny rail to it unless you've got your own weird adjustable rail. Inside is the exact same as the stryfe, so you can just buy a full auto kit and replace the inside.

[@vf1skull1]

I've got one with honeybadgers, Daybreak flywheels and cage on 2s and the pusher on its own 2s full rewire with 2 micro switches and a worker F10555 battery stock. It hits 170fps with elites 150fps with waffles and decapitates the pack-in darts. rate of fire is about 5ish shots per second now. I ditched the board so no more select fire but it absolutely slaps. I posted it in the "Nerf'D up" fb groop. It does have some pretty interesting changes from Strife like the O ring cupholders behind the motors and pic rails and battery door/compartment. I picked up the Holiky M4/16 version and it's getting twilight wheels and cage with fang revamps... I love these And I have yet to see one running on lipo besides my own build. Tags video helped me a lot so check it out as well if you're gonna crack one open.

[@ALPHA.Mods.1]

Needs a bigger battery tray, but not too bad.

[@carlozdesign]

Where can I get the back you have?

[@-AmanWagle-]

every thing about this is awesome, plus it is cheaper than the strife

[@jman05]

Can someone tell me what the orange/bronze-ish blaster is on the wall? Right under his ear

[@drflux]

kzbin.info/www/bejne/oZPXeYaQh7KMqZY

[@jman05]

@@drflux thank you very much Edit: I meant the one at around 11:03 sorry

[@Windle_Poons]

Im still not sure how I feel about the stryfe knock-offs. Its IP theft, but hasbro have abandon the platform. Cool that it is select fire/full auto. Id be interested to see if the Body kit fits an original stryfe.

[@Boomtendo4tw]

Start your engines!

[@ivertrionnicblazingwell1757]

Also you should try to mod it, despite being knockoff it looks cool(an M4a1 looking stryfe lol)

[@arcanon5080]

u obviously don’t know wut an mp5 looks like

[@bruhempty273]

This almodt looks like the small grau 5.56 in warzone

[@michaellee4276]

Amazon Nerf Store sells Modulus Stryfe for $30-$23 in brown cardboard box.

[@rachelannroma1623]

does it take 2s

[@pro_704]

This is like the the regulater but smaller, worst rpm,and off party

[@nathandc]

If Hasbro plastic quality is a 10/10, how would you rate this?

[@drflux]

8.5/10

[@cheesetheoriginalmres7727]

What I hate is that these Chinese stryfe's look like such a good deal, but it sucks cuz you're gonna have to mod them right out the box cuz no orange tip 😔 i mean its not hard but I would rather be safe then sorry and either Plasti Dip the tip or just redo it in orange plastic. But honestly youd wanna put in new flywheels and motors anyways but i digress 😬

[@Afk_Chiapa]

What is the best gun to get then?

[@drflux]

Prolly a jolt!

[@blitzkreig1409]

hi dr flux

[@drflux]

hello first

[@blitzkreig1409]

and why does that blaster shoot missles lol...... china

[@Edp_456.01]

They hurt

[@timzeller6790]

It will work alot better if you take the junk offthe front end

[@ltrstudios5373]

DrFlux: "So we get standard elite and suction cups." Me: " You mean bullets and warheads, right?"

[@kkthetankguy9267]

Boss of company:ok guys let’s make a stryfe. Worker:but? Boss: but nothing it’s just a stryfe

[@doritomuncher234]

hi im here

[@chickensarepurple2749]

ok im here too

[@ScanderiteMagnoliaGalaxyPG3D]

i was getting that for christmas instead i got the howtizer gun foam grenade launcher

[@Wchapel88]

If they ever start flooding the stores with these Stryfe clones, it may make Nerf take notice and do something.

[@4shredder39]

atleast it says magazine not clip

[@SacGhostbusters]

Didn't Drac do a recent similar review of a bootleg stryfe?

[@drflux]

no idea!

[@TheTeepane]

Yes he did one like this but it's from two different companies

[@z_avvy]

man's got an oil can suppressor

[@topifi6771]

They strait up just sanded off the logos of a modded strife painted it and sold it xD

[@FoamFlingingHS]

BULLETS? at least they say magazine

[@Emm1Twe4kz]

Yeah I really want to see how easy these are to mod since the internals are so different. You should skip the rewire and just hook up a 2s to it to see how it handles... For science!

[@maxwe117]

Honestly, just the shell is worth the price

[@ianquinn9121]

very cool, but the real question is can it be modded? please make a follow-up internals and attempts at modding. thank you for your channel!

[@drflux]

Sure thing

[@powerrangerkid16]

If the regulator and the stryfe had a baby

[@kristalcoulter4488]

They just took a stryfe and slapped stuff on it and called it good.

[@Guest-vs2os]

Please mod this