This upgrade may BREAK your Airsoft Gun

Is it worth forking out for a new buffer spring?
Even I was surprised by this one by BJTAC in my Marui MWS
Airtac Odin Adaptors available here www.airtac.me/...
#airsoft #mws #spring #bufferspring #buffer #upgrade #power #powerful #extreme #tokyomarui #tm #tokyo #marui #mws #zet #m4 #gasblowback #gas #gbbr #recoil #kick #hikick #highkick #highrecoil #break #upgrade #upgrades #zet #zetsystem #bjtactical #custom #rediculous

[@residentkat]

I agree, airsoft has saved my life. Mental health needs to be more of a focus and if airsoft has helped you as it has me than keep up the good work.

[@OllieTalksAirsoft]

100% it's been a huge help, and I know a lot of other people are in the same position 😔 hopefully they'll realise they're not alone

[@KirbyHC]

Since my local site closed, and I don't have any transport, I've been really struggling. And a knock on effect has been having no money to get to farther afield sites at all, so I'm kind of stuck... I never realised how much airsoft kept me sane and healthy until it all went to shit!

[@St4rscr34m]

Can't say thank you enough for how much you had influenced me in the choice of upgrade part for my mws and how happy am i with it, I wait impatiently your video on the best hop up setup to finish my dmr upper ! : )

[@KeiyaC]

I've compared 1.5 with AG Heavy Hard Kick buffer and 1.3 with AG High Speed buffer. I'm very enjoy with 1.3 setting in the game more than 1.5. Quite balance feeling with performance and gas efficiency is acceptable. 1.5's gas efficiency is very horrible, using original mws mag only shoot about 20-25 rounds. But I found it can clean the mag with 1.5 setting if the mag has been modified the volume.

[@extramile3382]

Your sharing is very valuable to the airsoft community!! Thanks for that!

[@joev9689]

Keep commenting for the algorithm! Up to 113,000. Keep up the good fight, Ollie.

[@OllieTalksAirsoft]

Thanks buddy ❤️❤️

[@SussexMatt]

Only finding you videos in the last month or 2 had been a great help, made me take the jump into the MWS platform (MTR16) and I've been working my way around your how to guides and generally consuming the content, hope you keep doing these.

[@doddsy28uk]

these vids are great big thank you ollie, i purchased my MWS GBB through looking at your vids had it for 6 months and love it

[@OllieTalksAirsoft]

Glad I could help buddy 😃

[@LosLos-Sensei]

I am from hong kong and thanks you for your great video as always!❤i have a bj tac 1.4 buffer spring with hao steel bolt and hk416d kits it feel so great.Also would you suggest using a flat haed buffer such as the RA-Tech or the guarder one

[@nickhealey3388]

That's a beast lol, keep the content coming mate, I always look forward to your videos. No ego like some channels just honest information about products.

[@OllieTalksAirsoft]

Thanks buddy I really appreciate hearing that ☺️

[@richielee5398]

The heavier spring will drive the bolt back quicker but also requires more energy to drive back so if you don't have surplus power in the blow back system it's going to move backwards slower than using a lighter spring. The heavier spring certainly makes it sound more like my real one.

[@OllieTalksAirsoft]

It feels great but no good for in game

[@yh_l1556]

That's a really fun part for MWS, you are pushing this system to the limit lol. And I think the first thing to break gonna be the bolt catch plate lol.

[@OllieTalksAirsoft]

True!!!

[@TheDigitalFlight]

Maybe with the stronger buffer spring you need to use a more powerful gas

[@MrFROGY1313]

Indeed. And the more psi you put the more you will have a good eficiency

[@ExiLeZH]

What about combining it with a lighter bolt/buffer for efficiency?

[@OllieTalksAirsoft]

Good idea, this was new so I'm still testing

[@TheShinyHaxorus3D]

Have you tried the Vipertech buffer springs? How does this compare to that one? VT springs are usually the go-to for GHK M4 builds these days.

[@styx6399]

Waldo snappy boi spring is similar o would like to see him test that

[@styx6399]

I think those springs are incompatible with mws though its WA spec

[@OllieTalksAirsoft]

I think he said he was working on one for the MWS specifically due to demand so ill deffo pick one up and try it out when they're available!!

[@OllieTalksAirsoft]

oh I didn't know that, I know the viper techs are nuts tho, I think you can use a real steel spec upper with them which is ridiculously cool 😎 I wish I had one, I know Waldo Customs has one.

[@styx6399]

@@OllieTalksAirsoft it's compatible with lots of RS parts. They are built like a tank. Made to order. Built like real AR-15 with forged reciever. Full steel internals and made to highest quality. The kick is insane even on green gas. But if you want to take it one step further you can do devil hunter mod on ghk mags and use RS AR heavy buffers, 18mm carrier for the hardest kick on a gbbr, tomi harley on youtube is using this setup its insane. I got a vipertech sr-16 directly from VT themselves. i use mine with propane and a rs h1 buffer kick is so nice. It's essentially like a real AR made to fire 6mm bbs even the weight and balance is really close to an AR, trigger pull is exactly like a milspec trigger, selector switch is nice and tactile. Nothing comes close to this quality and its literally indestructible. Best gbbr money can buy

[@ericmalachi7768]

I also served in the USMC and I can count how many times I used full auto, if you can't hit a target with one shot then that's bad.

[@OllieTalksAirsoft]

truth bombs

[@HeckerAirsoft]

Ever had a mws upper crack when using heavy buffers and bolts

[@Solidsnake0208]

I’ve tried the Waldo customs snappy boi recoil spring designed for Vipertech, GHK etc. very stiff! On the topic of forged receivers, the G&P one is off the cards for me due to the proprietary hop system. Have you considered the Z parts forged receiver?

[@ericmalachi7768]

I put the lightest AR spring in mine and kept it cocked back for a month i also had the top part of the bolt carrier made into a harder rubber material and used a heavier bolt

[@OllieTalksAirsoft]

interesting, how did the harder rubber part work out?

[@ericmalachi7768]

@OllieTalksAirsoft the best way I can describe the rubber is that it is hard and soft so think of those old school blue balls we used to play hand ball with growing up

[@ericmalachi7768]

@@OllieTalksAirsoft my reasoning for that was to give the bolt cushioning every time it slammed into the upper receiver and to get a much more effective seal

[@OllieTalksAirsoft]

interesting, I like it. thanks for sharing 😁

[@ericmalachi7768]

@OllieTalksAirsoft also when I store my Tokyo Marui MK18 airsoft marker I make sure I charge the handle because the spring can take it and it also takes away some of the recoil out the spring thus helping with wear and tear

[@user-vd5rx3mz1k]

Bro, i want to increase the fps on my tokyo marui m4, should i do it or will it affect or damage the gun? If i should how can i increase the fps on my m4?

[@samw31]

After watching your videos I got an MTR, I ordered the g&p v1 aluminum buffer. Would you recommend I get their buffer spring aswell?

[@OllieTalksAirsoft]

I liked the SP systems one as it came with spacers for the buffer tube too

[@KevDHR]

How’d you get that worn look on your TM, love the set up 🔥

[@OllieTalksAirsoft]

Tan spray paint, remove it. Burn it with a lighter 😜 repeat a few times

[@tads999]

Nice video, will have to try that 1.3 one for extra MUSCLE IT :D also it was really interesting to see that it didnt shoot faster with stronger spring :) Thanks for what you are doing for all of us, cheers

[@OllieTalksAirsoft]

yeah I was really surprised too but I guess there has to be a crossover somewhere 🤷‍♂️

[@Patriusprimus]

what kind of gas do you use för your tm mws or your tm akm...??

[@OllieTalksAirsoft]

Standard Green Gas, Abbey or Ultra Air usually. Zeroone pro gas is the same as abbey but cheaper

[@Patriusprimus]

@@OllieTalksAirsoft ok huge thnx :) What do you think of nimrod red gas??

[@EeanERC]

ive got the RA-Tech steel buffer and buffer spring paired with the stock bcg and angry gun npas v2 if i were to upgrade to this recoil spring would you say its safe to keep using the angry gun npas or should i upgrade to the aluminum nozzle as well?

[@OllieTalksAirsoft]

You should be fine with your current nozzle, I just went ALU because it looks cool 😎 when you feel it it's really powerful so you may want a 1.3 or 1.4 as the 1.5 is no joke, and will be terrible for in game use.

[@joshualove2576]

Where do you get your parts from cause I’m about to get my first gbbr which is Tokyo marui mk18 I just want have extra parts if any break

[@OllieTalksAirsoft]

Jk army and wgc shop are excellent as are firesupport in the UK

[@docta2985]

​@@OllieTalksAirsoft❤

[@joshualove2576]

Do you know of any in usa?

[@OllieTalksAirsoft]

@@joshualove2576 either evike or you'll have to order from JK or wgcshop

[@MediumPoo]

got a tm mk18 gbb recently. i'm a bit disappointed in the accuracy. shoots consistently down about 1-2 inches from the target at most distances, with the post, or rds set as low as it will go. Have you heard of some barrels not aligned properly, and is there any adjustment?

[@opairsoft8100]

Hop up

[@OllieTalksAirsoft]

yeah id agree that the hop up is the place to be looking, the TM inner barrels are actually really good and I've never heard of one coming of the production line with issues, the hop up rubber is easily damaged and easily upgraded so that's the place to look. you should adjust the hop using .2s or .25s to make sure its working correctly before swapping anything.

[@Bosco_HK]

May I ask what brand of bolt & buffer did you use at this build?

[@OllieTalksAirsoft]

I was using the MWC Steel bolt and AG heavy recoil buffer I think.

[@user-xb7dc2qw5h]

How can I make the system stable after change to a 130% buffer spring? I use the stock nozzle and SLR bolt, but it really unstable

[@Cameron00]

Do you have an upgraded heavy recoil buffer? You will need that to run the upgraded spring

[@woody7948]

I have heard that the lckm wooden handguards fit on the tm akm, but I'm not sure about the stock

[@OllieTalksAirsoft]

oh nice, they're probs better than these ones! thanks for letting me know

[@woody7948]

@@OllieTalksAirsoft I have never tried it and badabing pictures responded to me recently saying that his ghk handguard doesn't fit the tm so take my words with a gain of salt. lct and ghk should have the same handguard so they both in theory would not fit.

[@PewhubTV]

If it helps I can pop over and drive over it. Great video by the way

[@OllieTalksAirsoft]

The Uzi yes

[@sylithics]

Word of the day… MUSCLE IT 💪😅

[@OllieTalksAirsoft]

😎😂

[@Rdm2k]

What you think of the HSB buffer from SixG?

[@OllieTalksAirsoft]

Not tried it I'm afraid, my be worth asking on the discord

[@derekporter66]

cheapest gun to handle a super ROF upgrade?

[@OllieTalksAirsoft]

Mac11, use 2p's at the back of it to buffer it out.

[@derekporter66]

@@OllieTalksAirsoft AEG. :)

[@123456kiste]

dat thumbnail tho

[@OllieTalksAirsoft]

🤣🤣

[@LongWarEnjoyer]

That poor hop unit 😢

[@OllieTalksAirsoft]

So true, it's taken a smashing. Bit it still works fine!!

[@senator7352]

The siffness of that spring is still no where near as strong as a real buffer spring lol

[@OllieTalksAirsoft]

Oh 100% that's how I broke my PTS mega arms, not advisable at all!!

[@senator7352]

@@OllieTalksAirsoft haha

[@shd_samurai9676]

Fell on my MK18 once in the mud. Didn't break

[@OllieTalksAirsoft]

Love this so much!!!!!

[@NeoMartel]

This thing need's CO2

[@OllieTalksAirsoft]

yeah it does, I have no idea why we don't have any CO2 MWS mags out yet

[@NeoMartel]

@@OllieTalksAirsoft T8 make co2 mags x2 12g capsule, look's interesting.

[@NeoMartel]

@@OllieTalksAirsoft I same says for VFC V3 M4 :D

[@ferdinandolatin2125]

Wrong platform man. It is tokyo marui. Princesssss. Hime hime hime, suki suki suki hime