THIS WILL DESTROY YOUR TURBO

[@michaelthompson6885]

Always worth watching this channel cos these lads see seem to tackle a lot of jobs most mobile mechanics would walk away from.

[@themarvelousvlog]

We do try our best mate. Thank you for the support!

[@flippingcarsrepairs]

Sooo true

[@TransportSCO]

Need a guy like him in Glasgow, Scotland!

[@GCarTube]

Had to replace a turbo on a 2019 transit today, as a first year apprentice 😂 the turbo is exactly the same as in this video, dpf was completely filled with oil too , however didn't know this was the reason they fail lol, I was told the turbos are bad 😂 thanks for the knowledge

[@themarvelousvlog]

Luckily for this customer, when he started to hear it whining, he brought it home and never drove it until we got to it two weeks later- he’s a subscriber too! Well done for tackling it though mate! Turbo usually fails due to oil starvation or if and the impeller hits something hard; they don’t just ‘go bad’ Thank you for watching pal!

[@GCarTube]

​@@themarvelousvlog Smart customer, thanks for the input, been learning more from you then the main dealer 😅

[@ritchieschofield1185]

Done so many but never without a lift Very brave doing that on your back I always remove dpf to make it easier. It's normally full of oil anyway when the turbo goes!

[@miketherefurbisher8000]

You have done it again!! Great to watch you and Jonny at work. "Thanks for sharing" 👍

[@Crazy-Caveman-qh2dz]

I completly feel for you doing that turbo. I thought i had it bad when i had to remove the dpf and turbo on my old Insignia and that was at the front. ANd John sleeping under the car again lol and especially forgetting to torque the sump plug shows hes getting old lol. Have a great weekend both of you

[@themarvelousvlog]

He’s been sniffing a lot of brake cleaner in the back of the van. Caught him several times 😂

[@Crazy-Caveman-qh2dz]

@@themarvelousvlog Omg thats so funny 😂😂

[@hawkslayers1]

your channel should have a million subs most fun to watch on youtube plus great work

[@jameznm]

Nicely done lads people don't realise just what's involved in changing a turbo. Also hope you don't mind me adding this but just to explain about halfway through your video you said to let your engine idle before switching it off, the reason this is a good idea is the turbo gets so ridiculously red hot when the engine is under load and you switch it off, it's still sat there red hot but now with no cool oil being pumped though it and it tends to boil it and leave baked on deposits all round it. Which can lead to the blocked pipes mentioned, so give it a few seconds before you kill your engine, and maybe you can avoid a massive repair like this .)

[@DrivenByGeorgeJexter]

Its nice how u edit in the diagrams in the video! Where do u get them from btw? Love the work guys! Im gonna want u guys round soon to have a look at my n47 engine if i don’t have any luck lol!

[@marcusmaximus451]

Absolutely superb job guys hats off to you both for a rather difficult job, kind regards and take care Mark from Billericay 😃😃👍👍

[@themarvelousvlog]

Thank you! Will do!

[@MattyEngland]

I actually did that with the oil once! We were rushing because it was starting to rain, I thought my mate had put the sump plug in, he thought I'd done it, we ended up pouring 5 litres of oil straight through the engine all over the street. Tried our best to clear it up but the local neighbourhood karens were pissed 😂

[@themarvelousvlog]

Local Karens- the wannabe superheroes because they’ve got nothing better to do 😂

[@MattyEngland]

@@themarvelousvlog 100% mate 🤣

[@flippingcarsrepairs]

I've done that before too on the drive 😂😂😂

[@MattyEngland]

@@flippingcarsrepairs Lmao, it's definitely a mistake you only make once! 🤣 It must have been 25 years ago when I did it, never done it again since.

[@-DC-]

You can't beat an Unexpected Engine Flush 🤣

[@richardbaker8248]

Great video as always, I was wondering if you could do a video or share your thought on advertising and what works best for you ? Thanks 👍🏻

[@LeeLee-xt5uy]

just curious how old you are because you're very knowledgeable my friend.

[@themarvelousvlog]

28 😁

[@eddieMurphy11111]

the p0erson is very lucky because sometimes those Turbos suck up the oil and the engine carries on and on the best way to stop it is with a plastic bag over the manifold to stop the air getting in and it will stop the engine ,thanks for the video

[@themarvelousvlog]

As soon as he heard it whining, he stopped driving it- good job he did that!

[@wirdy1]

Quite difficult to prevent for the average Joe, especially when the natural instinct is to dip the clutch to disengage drive, by which time the engine goes bananas. Trying to stall it using the clutch can work but can also burn out the clutch. Not many cars /vans have air intakes that are easily located in a panic situation & blocked up quickly. I guess the best solution is to stall the engine in gear using the brakes, but how many of us would recognise the fault & do this in time?

[@eddieMurphy11111]

@@wirdy1 👍

[@Brother-Crow]

Another modern ford with parts designed to fail?! Never.

[@waydegod]

Not a barra

[@91millsy]

Your be changing that again soon. Done rate their quality. I used a Garrett reman from euros

[@cabottaxi]

69 plate Transit needing a new turbo? It's shocking that a part fails after such a short period time.

[@themarvelousvlog]

Only done like 90k ish miles too’

[@richie674]

Was going to say , how how many miles it done but with just 90K , that isn’t really good enough but these turbos on these newer Fords are not the quality they used to be but can see & appreciate the possibilities that caused it to go in the first place . Try Wurth “Rost Off” - 45c freezer spray Marvelous , it’s shrinks the thread or bolt by 5% also turns the bolt or thread dark blue indicating it’s - 45c & it does work , I’ve used it to do seized brake Caliper bleed nipples , btw good to see you & Co back pal 👍🤙

[@HalfdeadRider]

The filter was probably never replaced causing oil starvation.

[@dillon7773]

My 2003 golf tdi 1.9 turbo lasted 150,000 miles before changing it for new one 😂😂😂

[@ambydaly5713]

What shit designer puts these components in such awkward positions knowing they have a short life and will need replacements? It doesn’t surprise me because this is just another piss poor design from many bad designs that are surfacing lately.

[@jacklifeonwheels]

Check the sump , oil strainer gets blocked , the guys who done the wet belt might not of cleaned the oil strainer. Which always gets blocked with wet belt debris. Also turbos go on transits when the dpf is partialy blocked

[@themarvelousvlog]

Customer told us that he saw it first hand when the belt was replaced; the strainer was apparently clean. Tbf, his engine was spotless!

[@barryoverson4988]

i had to come back to do my one job comment and like a little self promotion goes a long way bro kudos to you both

[@themarvelousvlog]

Thank you mate!

[@MattyEngland]

World's smallest turbo? It's like a child's toy 😮😂 Engine looks spotless though, shows the benefits of regular oil changes.

[@wirdy1]

This is the type of owner that I'd like to buy a used car/van from; mechanical sympathy with regular oil services & also stopping driving it immediately when an issue like this turbo whine began. With the amount of play in those turbo bearings, I reckon he saved his engine sucking engine oil & going into diesel runaway.

[@damianbutterworth2434]

I repair turbos in my garage. So cheap to repair. About £30-£50 for a bearing kit. I`ve even lathed up some bearings before for a JCB. That one will be scrap lol. When I worked in a turbo repair shop most were scrap. I would say about 1 in 4 is ok to fix.

[@bonganimahlangu868]

Hi how much do you charge for that good job

[@rmsdiagnostics]

Another great video mate

[@themarvelousvlog]

Thanks 👍

[@CKDJBOY123]

you need to get some light bars on the top of your van for the dark nights.

[@themarvelousvlog]

That’s for the new van mate. This van don’t deserve that 😂

[@mrbigvanlife7130]

The biggest takeaway lesson for any engine on any car is change your oil often for top quality oil. And the manufacturer says 10,000 miles then do it at 5000. 😉 😉 . The second lesson is avoid wet belts!!

[@themarvelousvlog]

Great tip!

[@trekshogun]

That wet belt design is shite ! Well done guys sounds sweet 👍

[@Andyspeeder7]

Liquid moly is for sale in THE RANGE and also TESCO at around £16 for 2ltr can

[@themarvelousvlog]

I’ve seen other known brands being sold in corner shops. Where they’re being sold doesn’t mean a thing…

[@chilledoutpaul]

Hi Lara, did you know you cant get the camshafts out of the heads on these engines also it has the stupid press on lobes in the cams but yeah if you have a camshaft issue it costs a new head (or second hand one). a new head costs around £700. Also I have a question, 2012 S-Max 2.2 diesel what type of security screws fasten the throttle body to the manifold it looks like a TX30 but its not, I have tried tx25 through tx35 ; Is it one of these new 5 point torx's? thanks Paul

[@james28813]

DPF can stay in place. It is fiddle to replace both lines. It can be done. I have managed it twice now..

[@themarvelousvlog]

IMO it’s an easy job

[@james28813]

@@themarvelousvlog Nothing is easy as a mobile mechanic. Based in Surrey. Keep it up...

[@themarvelousvlog]

Totally agree. What I meant by that is it’s easier than I thought 😅 Hoping to see you around mate!

[@james28813]

@@themarvelousvlog Don't stress. I Know what you meant.. Never do new traffic turbo or DPF... they are fun. 😆 I watch Mr Kerby. Very good.

[@Hharsh_Sharma]

Van looks different from inside, Can we get a tour of the Van please.

[@misterzee5736]

Do you recommend to change oil after a year even after only 3k miles? Old sports weekend car.

[@themarvelousvlog]

1000% Oil degradation still happens when it’s in an unopened bottle- imagine putting 3k miles in it with a tiny amount of metal shavings, moisture and other contaminants so my answer to that is YES

[@mrmivisuals]

A lot of wiggles being given in this video, expecting a live stream wedding soon

[@themarvelousvlog]

I love this comment hahah!

[@robevans8625]

What was the mileage on the van?

[@themarvelousvlog]

It was 92k miles from what I can remember…

[@wackey3455]

great job lads that was a very nasty job

[@theenglishtrucker1849]

Less of the wiggling. 🤣

[@themarvelousvlog]

John loves a wiggle 😂

[@bored-old-man]

You need something like a topside creeper to save your poor old muscles and back.

[@EZ-D-FIANT]

So you cover Brighton but not Bournemouth, some undisclosed preference there or sumin? 😅

[@themarvelousvlog]

I can cover Bournemouth, just job dependant 😂 We’ve recently moved down here so you’ll me going to PMouth and Southampton soon 😂

[@EZ-D-FIANT]

@themarvelousvlog ahh cool welcome to the South bro, let me know when that B58 is built and we'll link up with my 1254whp Supra or sumin haha......👍👌👍

[@Abauto84]

Ill give you a good wriggle too Mate lol

[@Sohalemaqsood]

Hi, can you do my bmw e93 335i, it needs clutch ,water pump, service, I'm in birmingham.

[@themarvelousvlog]

Message me on WhatsApp bud. Details in the description

[@OwenThomas-t5l]

Much easier if you take the scuttle off

[@themarvelousvlog]

I’ll keep that in mind next time 🫡

[@g.d2450]

do they not fail because the wet belt starts to break down and then blocks the oil pump pickup starving it of oil

[@themarvelousvlog]

Yes they do but he’s apparently just had his wetbelt done and the strainer was apparently clean as a whistle so I don’t think it is that…

[@thindo]

Relatively new Ford's seem to have cheap parts these days copying Range Rovers

[@jacklifeonwheels]

Should drop the sump probably full of wet belt debris !!

[@themarvelousvlog]

Belt was just replaced recently

[@ChrisPatrick-q6k]

I'd have a Renault or Vauxhall.

[@themarvelousvlog]

I’d have a Transit Wetbelt or Mercedes Sprinter any day 👀😂

[@ChrisPatrick-q6k]

@@themarvelousvlog Yeah!!!! Wet Belts, they either block up the oil feed, or just break! They're a PITA to change too!

[@EnemyDwarf-TTV]

Turbo went because the wet belt falls to bits, clogs the oil pickup on the pump down in the sump, and creates a low oil pressure situation at lower RPMs, Nothing to do with these pipes at all, If your worried about the tiny filter in the pipe break it out with a punch, blow out with an air line..0 need to replace these hardlines, Oh well only the customers money right???? ........

[@themarvelousvlog]

They do get clogged… I’ve seen it many times- worst is on Peugeot 1.6T and BMW N47 engines. It’s always a good practice to replace those pipes regardless anyway. The customer is a KZbin subscriber so I hope he’s here somewhere to tell the story but he’s had the wetbelt a month or so before we replaced the turbo, and apparently the strainer was completely clean and the belt was apparently in good condition, but it was still replaced regardless. I’d say, money well spent for replacing those pipes 😁

[@EnemyDwarf-TTV]

@@themarvelousvlog you guys are just parts changers, not mechanics... no disrespect intended..... And reasoning behind the statement is you went on to quote 2 different engines, with both very different looking pipework.... Anyways.. good day to you guys... crack on. as long as the customer is happy.. who cares right.

[@themarvelousvlog]

@EnemyDwarf-TTV yes, the diagram was for a RWD version as AllData didn’t really have the FWD version but, location for the bolts are pretty similar… Anyway… I’m not going to argue with you if you think we’re just fitters. I’m just amazed that you’re actually paying so much attention to the videos. Thank you for watching 😁

[@tracklizard4018]

Holy shit WHAT THE FUCK is that play lmaoooo HOW did it even function somewhat

[@themarvelousvlog]

It functioned by whistling its tits off 😂

[@petecroxford3277]

⭐️⭐️⭐️⭐️⭐️👍👍👍👍👏👏👏👏🍺🍺🍺🍺🍺

[@leewright6101]

shinished,. hahahah

[@themarvelousvlog]

Very shinisheddd 😂

[@leewright6101]

@@themarvelousvlog love ur videos pal,. really hope u can keep doing them, even when u make a mistake u dont edit it,, and thats great were all human , putting it right is the thing amazing pal,. you john n your brother quality bro, x

[@kellytaylor3134]

First aaahhh yeah

[@Sportage5603]

Second

[@themarvelousvlog]

Ahhh yeaaahhh! Thanks for watching!

[@realmusicreallife]

Its "not things you do for your customer" its things you do for money lol

[@themarvelousvlog]

Very true 😂

[@itswais77]

Rear wheel drive ones were easier loool

[@brianhume4743]

Ford didn't make the turbo

[@themarvelousvlog]

Correct! Just branded 😁

[@sptvids]

What muppet decided that a submerged belt would be a good idea 🙄Bring back external belts and chains I say

[@ambydaly5713]

A wet belt is another shit design? Where are they getting these designs from?

[@themarvelousvlog]

Stevie Wonder 😎

[@MrRedfreds]

Is that a transhit.

[@themarvelousvlog]

Yup 😂

[@calummiller9464]

Ford's use to be great, now there one of the top 5 worst

[@TransportSCO]

Offttt... Ford wet belt design, ouch!! A terrible flawed design where a rubber belt is submerged in BOILING OIL which results in the belt: i) Cracking and degrading resulting in the sump and oil inlets being blocked and the Turbo being starved of oil in the process... BOOM!! ii) Snapping between 30-50k miles (30-50% of recommended 100k miles) resulting in total engine failure due to interference engine! Absolute Homer Simpson design... doh!! 🤣 I'm only laughing and joking as my Focus Ecoboost wet belt went SNAP last week at 40k... Yes 40k!! Luckily my car fully paid off!! For anyone out of pocket for these terrible engines I have sympathy I really do! My joking is no reflection or provoking of anyone troubled by the wet belt flaw! My Engine was made in September 2019 Cologne Engine Plant yet belt snaps at 40% of its recommended time frame! 🤣 How the fuck is that possible?!! Before anyone goes there... only drive 5k per year and get yearly service and oil change etc = FLAWED FORD DESIGN! Anyway I picked up a Kia XCeed Special Edition a few days ago and the Specs are top class and easily surpasses fords mediocrity!! I wouldn't buy a Wheelbarrow with a Ford badge on it... fuck that hassle!!

[@JamesDownes]

Ford 👎

[@bigboss2961]

Hey do you come to Birmingham need few things doin to bmw f30 320d