why would anyone thumb down this video? this instructor is very detailed and shows every steps. Thank you for a great educational video
@ATLparanormalOG3 жыл бұрын
Probably handymen who work in the trades who've never been taught how to do a moisture free installation and then got called out on it later.
@CP-nf9my11 ай бұрын
@@ATLparanormalOG Thank you. Because now I have to fix their stinking mess.
@royalvarez64365 жыл бұрын
Mr. Katz, I was very fortunate to have attended one of your Road Shows. Your attention to detail along with your in depth knowledge of work flow and best practice material installation were really eye-opening and changed the way I approach projects. BTW I still reference the miter template you made for me. I hope we cross paths again.
@rjserra55358 жыл бұрын
Thanks for the video. I appreciate your taking the time to demonstrate exterior door sill installation.
@osmith5086 Жыл бұрын
note the Tajima caulk gun he's using. The sealant he's talking about is quite dense and hard to push with a standard caulk gun, especially if its not 85 degrees. The gun he's using is probably 26:1, vs the 8:1 guns you commonly see on the shelf. Other companies make high ratio caulk guns, but Tajima is a very high quality brand. That's why they paint them in metal flake car paint (I think). Worth having a good gun unless you like broken caulk guns in the middle of setting a door (or window). Nice one, Gary!
@leaettes8 жыл бұрын
Sorry, this is Mike . I'm on my wife's computer watching your VDIYS on some membrane instal. I gotta tell ya , you're a natural with these videos. Thanks
@JG-se6vs5 жыл бұрын
Thank you for a detailed step-by-step process in installing the membrane. I agree in previous comments--love your meticulous, and doing the job right.
@andreaberryman53542 жыл бұрын
Oh my gosh I WANT that patio door!!!😍💞 Can you come bust open my load-bearing wall and put that in with a deck for my 45th birthday pa-LEEEZE?!🥺🙏🏻🤣 Single disabled widow and mom-BEST PRESENT EVER! lol Wonderful video. Thank you so much!
@CP-nf9my11 ай бұрын
This video was crystal clear. Thank you!
@angelfdiaz8 жыл бұрын
You just helped me identify at least three steps I haven't considered on my french door installation, that I will start in 30 minutes- or when I return from the store from buying the sill plate (or flashing to be modified at the site), the sealant (not caulking) & the expansion foam. THANKS!!!!!
@patriciaterranova10746 жыл бұрын
I loved the details of this installation. NOTHING is ever perfect. The laser tool was good idea to start off right. The moisture barrier, pressure sensitive tool excellent investment. He's very careful, and tests the fit after applying the waterproofing membrane. This is a great product for exterior sill installation.
@jamescoldwell14674 жыл бұрын
this is great. I love Larry Haun but until now had not heard of Gary Katz. I replaced my French door not so long ago, and the original builder had not done ONE bit of flashing! Wow, talk about the rot. after rebuilding that area, I flashed it and even bought the expensive sill pan!
@cymekus93687 жыл бұрын
I'm doing a deck off an old house and installing a new door. This tutorial shows unique real life issues like I'm facing unlike a lot of videos. Thanks for the help.
@metusbatmanv45697 жыл бұрын
This is what you call a professional.
@spencerdoran7229 жыл бұрын
gary katz…larry haun…love these guys
@carpenter337 жыл бұрын
spencer doran Larry is already gone!
@philipboisclair37859 жыл бұрын
Good work ethics, the work should last for many years.
@mattjones51755 ай бұрын
great, old school carpenter work!
@johniorio79513 жыл бұрын
nice job...How would you go over a cement sill?? I am putting in a slider over a concrete patio which has a small 1x5 inch cement sill. Its 5 inch wide and 6 feet long......not sure if I should drop the vinyl door onto the cement sill, or use a thin p.v.c. board in between...Pella says that i can just go over the cement sill after the tape and sealer are put down there......i appreciate your input, spent 35 years as a painter, a newbie with this sort of work.!!
@milainsanfrancisco10 жыл бұрын
This is an awesome video! Extremely educative, go over all the necessary steps for a remodel which I have in mind. I hope you have more videos to share! You should teach! :)
@27mangohead10 жыл бұрын
Mila - Call Brendah De Bow. She has been trying to get in touch with you. She is on Google + also.
@cscooper20009 жыл бұрын
Mila Ilieva He IS teaching. :)
@milainsanfrancisco9 жыл бұрын
Cool 😊
@TheWhoIsThat Жыл бұрын
I had a installer install a sliding door by simply placing the door on wood with silicon on the bottom between the wood and door. He didn’t do any flashing on the door sill. Does this make any sense. He mentioned when the siding people show up the will do the flashing. If I’m not mistaken doesn’t the sill pan flashing have to be installed? I can’t find any examples to flashing in the fashion he is describing.
@brentfrank70124 жыл бұрын
Nice work Gary 👍
@pebelleeb54224 жыл бұрын
Does OSI sealant go on the inside top and sides of the door jam before installed?
@lonestar47214 жыл бұрын
Sean Penn is lucky to have had carpentry as a fall back, now that his acting career is over. Great video, keep up the good work!
@jeffreylonigro13825 жыл бұрын
Leave it to a Jew to be so meticulous and intellectual. I love it! Kopacetic baby! Nice job. I do mine very similar but a little differently. I like corner flashing. Just did a Marvin French this Saturday door on a 10,200 square foot converted barn and it was a challenge to say the least. I forgot the chevrons, lol, but it’s flashed so well I don’t think it will matter. Keep up the good work!
@allanpennington7 жыл бұрын
You said you would speak about the green 'ziplock'. What is it and why do you put it underneath direct fixed weatherboard??
@jbrise75602 жыл бұрын
Great info sir! 👍
@KL-jh8nh3 жыл бұрын
Thanks for the video. It's minor mistake that aluminum sill pan touches the treated lumber ledger.
@Chvygrlz0211 жыл бұрын
Great video, very easily understood!
@ivandag51012 жыл бұрын
I love these videos!
@BeachWalker6611 жыл бұрын
Great instructions ! Enjoyed your teaching's...Thank You, John
@Joe-co5pg4 жыл бұрын
Can you list all materials you used in this project, thank you!
@fordguyfordguy7 жыл бұрын
man you are terrific!!!!!!
@telosfd10 жыл бұрын
I like this aluminum apron, real nice job.
@garygbur39926 жыл бұрын
What weather membrane did you use on the exterior of the zip systems rim board?
@nobaddogsfl708710 ай бұрын
Looks like Grace ice and water shield.
@yusuihang3 жыл бұрын
I keep on looking at both ends of the ledger board--where there is no weather proofing protection.
@johnheinzheinzsite87243 жыл бұрын
everyone should follow it for make a shed
@johnskat4410 жыл бұрын
How did you make the cant strip?
@DIYVariety5 жыл бұрын
Any new vids
@davidoswald68247 жыл бұрын
thanks! nice job!
@eliascruz9757 Жыл бұрын
The level is on the Original Ground Is the at a point of level??? 02-17-2023 16:09
@MaiTran-sy3vp7 ай бұрын
Min 8:05 J-roll waterproof tape Min 17:40 Seal the back of the sill pan
@sma196810 жыл бұрын
Great.
@brendanlast60613 жыл бұрын
excelsior
@rudygtrz6 жыл бұрын
what is the size of the leger screw
@jorgejorhoe31298 жыл бұрын
9:38 carefully use a plastic putty knife?
@Estradaindalfer793 жыл бұрын
Great work it better be it your house lol!!!
@jamesfoy13436 жыл бұрын
Crown molding
@armacari4 жыл бұрын
This guy is all about advertising and selling products..
@randymarshall12674 жыл бұрын
stabila commercial
@cessarflom86643 жыл бұрын
Better not!.,, it’s my house!!!
@jakewalter37296 жыл бұрын
DDR
@ransranger10 жыл бұрын
You sure do make a hard job of it, just put the window in then seal it, job done
@metusbatmanv45697 жыл бұрын
You're a moron.
@ransranger7 жыл бұрын
MetusBatmanV4 another dome cowboy
@metusbatmanv45697 жыл бұрын
ransranger This guy does amazing work and you clearly don't know shit, moron.
@ransranger7 жыл бұрын
MetusBatmanV4 education is a sweet thing I suggest you try it sometime but I rather think it's too late for you
@metusbatmanv45697 жыл бұрын
ransranger You have no idea what you're talking about, huh moron?
@tonylascano21108 жыл бұрын
this guy hes things he know a lot .but he dont know nothing
@mikemarsh69046 жыл бұрын
Tony Lascano wow dude You must be a professional. Why do you have to post your opinion he gave a pretty good video even know he was annoying as hell like my old school boss but he knows what the fuck he’s talking about