That chain splitting was hilarious. Thanks for showing that kind of stuff. We're all human! That's something that I could see myself doing! Lol
@rickytaylor50765 ай бұрын
You doing KZbin and working on the 40 is your job. Stopping because your family wants to use your lift and use your help just shows what kinda people yall are. The world would be a whole lotta better place if everybody was like that.
@stevelangston23595 ай бұрын
I agree
@wilenelson18105 ай бұрын
Amen brother
@jangles18395 ай бұрын
Couldn't agree more!
@ronaldbrown77805 ай бұрын
Yes
@jasonstarnes38385 ай бұрын
100% agree!
@laserbeam0025 күн бұрын
I always learn somethinng when I watch your post. Thank you and keep on being you.
@2thehook7735 ай бұрын
Thank goodness! A new video to cure my boredom.
@HI74IH5 ай бұрын
Hell yeah
@surplusmarty29865 ай бұрын
Something about building and watching an engine get built is therapy to me. I’m waiting on my olds 350 block to be ready so I can assemble! Great video this week
@Ben-rj7xs5 ай бұрын
I can't believe such a good job you did boring that block out I am very impressed with how you did that.
@garyburgess38295 ай бұрын
Brings me back to the day I rebuilt my first engine watching you. It was a 327 but it's been over 50 yrs ago. Enjoy the video every week.
@michealcollier5 ай бұрын
This is your blind friend. Glad to see you back at it again.
@kbschulze5 ай бұрын
Can’t wait to hear that 327 fire up and run. I never thought you could mix bearings to adjust clearances. That blew me away. You never stop impressing me with some of your old school methods. I know I’m older than you but I still see ways I never knew. 👍🏼
@geoffreymills99325 ай бұрын
I've enjoyed this 40 build so much I just don't know what I'll do once it's done, nice work and that 327, it's funny how people think they know about building motors and never check and measurements on anything, great job Chad
@natedillard73535 ай бұрын
That engine is gonna run mighty fine ! ..Great idea with the rod bearings , bud…
@chadhillan97115 ай бұрын
I'll tell you after the week or should I say month I've been having it sure is nice to relax and see how you're hor rod is coming along. I sure do like your channel
@francoisbouchard6025 ай бұрын
Nice job Nice engine congratulations you show 😃👏👏👏👏👍👍👍👍👍😍
@mikemadison27475 ай бұрын
I'm a sucker for a white board list. :D 327, my favorite small block, I think she might be a little spicy, we'll see.
@k-dawg38935 ай бұрын
Coming along nicely! Good work This N That!
@davidwitts38875 ай бұрын
Always fun to watch, thanks. Engine build is going well I learnt lots more.
@johnbridgeman31025 ай бұрын
Thanks for the entertainment Chad really enjoying the input a little donation hope this helps ❤
@Giant975 ай бұрын
What a fun project so far.
@rudyrivera74265 ай бұрын
Appreciate you sharing! Your skills ,knowledge and appreciation! 👌👍
@scottmmagby70575 ай бұрын
Hey Mr Chad, Love your video, Love that olo' CHEVY ORANGE on motors! Boy Howdy that thing is going to sing when you getter' all put together! Keep up the good work I'll be watching!!
@rickydonahue15865 ай бұрын
That motor should give you years of service. You did a fantastic job building it for doing all the machine work yourself!👍😁
@laurensmith18285 ай бұрын
The bent wrenches are distributer wrenches. The motor will be sweet .nothing better than the joy of firing up a fresh motor! Thanks for the great video
@rhondasweeney72715 ай бұрын
I absolutely love watching you rebuild engines. But life goes on, and friends and family come first. Thank you for sharing!
@TheCrackerBox5 ай бұрын
Thanks for another , Brother !
@TOW4DAYZ5 ай бұрын
So glad I turned on TV and a new video from chad
@jamesmccoy69015 ай бұрын
Take your time ole buddy it’s cumin together real good you be safe and I’ll see you next week
@anthonymessina28345 ай бұрын
TOW4DAYZ- Exactly!!! I look forward to Wednesdays for a new video from Chad!!! He's in my top 3 wrench turning channels!!! Then it's just a couple/few days till Sleeperdude on Saturday!!! I would love to see Chad and Sleeperdude do a collaboration video!!! They're both in Tennessee.
@cattlerepairmancattlerepai94145 ай бұрын
There is something very calming about washing your crankshaft with a garden hose. Like....life is complicated as it is, don't make it any harder!
@DanileBaker-su6cs5 ай бұрын
Thanks for passing on your knowledge I appreciate it
@markgentry55665 ай бұрын
I really enjoy your rebuilding he 40ty Chad its coming on nicely and keep laughing as you are doing , I love the while choice
@joemazzola73875 ай бұрын
Always look forward to seeing your videos
@billywhite30205 ай бұрын
A another great video keep on wrenching 😊
@tommccully19915 ай бұрын
Yes Sir Chad Planning on buying & fixing up Lawn Riding Mower Tractors then selling them at Reasonable price. Being as I'm Old an Retired GearJammer of 30 Years Who had a Major Heart Attack 2 years ago doing Very much Better now after not Smoking for 2 years. Take care always my Friend.
@charlielowe52585 ай бұрын
Gonna run great 👍👍👍
@Ben-rj7xs5 ай бұрын
You should put a 283 crank in the 327 block with some vortec heads lololol I am loving this 40 build it's been a lot of work for you, but I think your dad would be very happy to see it on the road again. I have had a great time watching you go through it.
@philiphereford56575 ай бұрын
Keep up the good work. Ignore the dummies who complain. 😊
@donscarborough19515 ай бұрын
Nice Video Chad. Prayers.
@haroldrogers60835 ай бұрын
When i started working at the tire shop back in 1978 , I used a hand manual tire machine when doing all the mag wheels . I did all the slicks that me and my buddies used street racing and damb sure used then on the Crager SS wheel that the old 4040 sa center cone machines would bresk the centers out of so it wouldn't hold the center caps on anymore . Harbor Freight has some and i had one thst worked great just needed the bead rings to help air up the tires with and they didn't carry them .
@donopp58505 ай бұрын
Lookin' good ... Love it !
@stuartfletcher23785 ай бұрын
So happy to see you working on the Chevy , putting the motor together with the skill set learned from years of practical knowledge . Thank you for another video , your humor while you work always brings a smile to m face . God Bless you and yours , till next time , Stuart in Canada ..
@willaimlibecco5 ай бұрын
Mr. Morris must have been a pretty cool teacher to of had. Sure do enjoy the show Mr. Morris! Yes sir! :)
@jangles18395 ай бұрын
Hey hey y'all! As always, hope everyone is doing well and having a wonderful week! SOOO looking forward to seeing her completed Mr Chad! I'm certain she's gonna make you a tremendously awesome hot rod! 💙🙏🏼
@wilenelson18105 ай бұрын
Nice! 🔥🔩🛠🔨🔧🕷
@82randyacman5 ай бұрын
Awesome work Mr Chad
@ronniepapepape16295 ай бұрын
Looking good
@taurota15545 ай бұрын
Outstanding and awesome as always.Thanks for sharing and taking us along
@AnthonyRBlacker5 ай бұрын
I sure would like to have my own tire changer myself Chad. I keep my eye out for an old one, air powered is just fine with me.. We have a farmer's market (a few of them really) in my area and it's been quite a few years since I've stopped into those.. there are a few old guys who have tools and things from closed down shops.. It really would make life SO much better to have one of my own.. I hate paying someone to do something I can do myself just need a tool to do it (well, and the space to put the machine)
@emerybryant5 ай бұрын
well. i saw your last video pop up and got distracted. so now i get 2 in a row. 😁
@chrissilver94865 ай бұрын
Another great video Chad! Keep chewing at it buddy l👍 Vroom vroom soon!!
@brianphillippe16945 ай бұрын
as always Great video! very helpful information. Yelm WA
@ShilohShepherd5 ай бұрын
I have an issue with my knees also. Comes and goes. No fun when trying to work on stuff. Hope yours are okay at the moment. Enjoying the small block 327 content. My favorite engine 👍 Thanks for sharing
@Steve-u7x5 ай бұрын
Hey Chad, I saw you got the wrenches I sent you. They are used for distributor service. Different wrenches for different make cars. Also good for hard to reach places. I found a 9/16, will get it out to you. Steve in Oyster Bay.
@ThisNThatGarage5 ай бұрын
Preshate it. 👍🏻
@daleh6455 ай бұрын
Even if your not into all this mechanicalizing stuff seeing what all makes an engine work is educational…just because you’d rather get greasy and turn a wrench than sit in an office and play golf don’t make you a bad guy! 😎 There should be a “National Auto Mechanic Day of Visibility!” 🏁⚙️🔧🧰 God bless 🙏🏼🇺🇸🇮🇱
@1776_Garage5 ай бұрын
I like the red 300z
@dannybenfield11645 ай бұрын
I can't wait to see the 40 back on the road and going down the road
@JAKEHEBERT-gx2uz5 ай бұрын
Thanks!
@ThisNThatGarage5 ай бұрын
Preshate it! 👍🏻👍🏻
@Mike-x3x5m5 ай бұрын
Don't forget passenger side rear tire rubs fender, good job, good inspiration
@smockassingaround5 ай бұрын
Keep doing what you're doing, I watch every week
@charleshundley98055 ай бұрын
Looking better and better all the time!
@shawnlowell45225 ай бұрын
Yes sir!
@2-STROKEFUN5 ай бұрын
For maximum efficiency nothing beats the good ol’ “Eyecrometer”
@tommccully19915 ай бұрын
Old School Canuck Mechanic Teachings on SBC Valve Lash is all the way Down Tight & then 3/4 Turn back or as you did until the Pushrods Roll easily between you're Thumb & finger
@rickytaylor50765 ай бұрын
327 roller v8 s10 has a nice ring to it 👌 👍
@AndrewHCann5 ай бұрын
Excellent video Chad :) also nice rebuilt on 327 V8 motor and get there too! Well Done too!
@nathanielwaldon15345 ай бұрын
Love the time lapse!
@johnbridgeman31025 ай бұрын
Thanks
@ThisNThatGarage5 ай бұрын
Preshate it! 👍👍
@troyfitzgerald30465 ай бұрын
Favourite day of the week! Legend!
@mike-driftwoodfolk26515 ай бұрын
Always remember to ... "Check ittt ... Cheeeckk it ... Cheeecckkk ittt" 🤣
@buddygreendale3185 ай бұрын
You will get it 😂some time next month 😊
@robertchryssikos10065 ай бұрын
Hello Chad hope your filling good keep up the good work you are my best friend
@tannerlawson17215 ай бұрын
Awesome buddy your almost there my friend xant wait to see more 😊keep up the good work hope they knees is not bugging ya I wish I can give u mine to make u fill better
@jeremyTallen15 ай бұрын
Gotta love a good engine rebuild
@budledbetter74575 ай бұрын
Keep on keeping on sir wait for your videos on Thursday night on Roku !!!
@melvinbenton70055 ай бұрын
Another Good video Chad, Love watching the 40.come together! And I'm a Mopar guy! 😂😎🇺🇸
@antonioblocker32925 ай бұрын
Love these videos I could watch another hour or 2 no problem
@ATOMSHAMRADIO5 ай бұрын
Yes sir Chad action keep up the videos watch out from them peasty😂 bees lol😅
@outdoorsmansgarage5 ай бұрын
Those wrenches you didn't know what they were for I have some of those my dad used to use those all the time for tightening distributor bolts
@DarkFlamage5 ай бұрын
If you space out the water pump, will that be detrimental to the pulley alignment?? I hope not, b/c I like the idea of that timing cover.
@ThisNThatGarage5 ай бұрын
Only moving it 1/8" out.
@craigbowley67835 ай бұрын
Do you ever port and polish your heads? I've found that it's a great way to get a good amount of free horsepower 👍 definitely worth the time.
@gravy28195 ай бұрын
Love your videos man. I need a video of that firebird though!
@johnivey79135 ай бұрын
Chad I don't remember but I think you still got to do the rear shocks for the tires are rubbing Forest bottom when the out on it is this engine going to have more power being 327 instead of a 283
@richardcobb28525 ай бұрын
Looking good Chad.
@trucker4475 ай бұрын
Hey Chad my bud got my 68 427 going in a 66 68 olds cutlass im told has a black liqid dark cherry mtalic paintjob. will send you pics late summer hopefully see how things turn out.
@robertbennett92435 ай бұрын
Good progress on the engine. Too bad ya didn't get it in this week. You will next week. Maybe Coats will send you a tire machine...
@garyhewett57205 ай бұрын
As soon as you put the pump on and final torqued i said to myself, He's going to be taking that right back off. lol I've did that 100. times myself. couldn't you put the PCV on the oil cap seal off the vents and put a baffle of sorts on it? If you plug it how are you gong to put oil in it? I don't see oil fill cap provision on the valve covers. they look sweet on there though.
@majorpayne52895 ай бұрын
Good stuff!
@fredbrooks64885 ай бұрын
Do it your way sir
@7477corvettes5 ай бұрын
Looking good Chad 😊
@johnvandermade39755 ай бұрын
👍👍👍👍👍the nederland
@AnthonyRBlacker5 ай бұрын
"Experts" Uh-huh. my FAVORITE commenters!! Yeah.. nice simple explanation of actually what truly is an extremely precise and somewhat complicated job.. Building an engine you want to actually KEEP working and working WELL is not a simple slap it together job.. takes a LOT of measurements and even a little bit of math.. I love doing it, and I thoroughly enjoy watching you do it Chad. Thanks, but you messed me up with this video I swear you put them out on Thursday.. man I'm all out of whack with time.
@brianjacques47375 ай бұрын
I like your videos cool dude lo
@GeorgiaRidgerunner5 ай бұрын
This and that chad dont shoot me for suggesting this but those hazard fraught manual tire changers work really well ive got one and i dont regret buying it but i will say this the bead breaker is bit flimsy and will bend if its not straight
@cwthemachinist5 ай бұрын
Anyone else see the wrench he set down at 34:05, that said NASA in it? Pretty sure those are distributor and bleeder wrenches.
@ianlulham5 ай бұрын
I managed to put my engine together backwards upside down and then realised your drivers side is wrong😂😂😂
@NoBudgetGarage6615 ай бұрын
Moving the water pump out may throw out your pulley alignment
@natemarch19875 ай бұрын
Paging Dr Chad, paging Dr Chad to the surgery room
@larrylong62685 ай бұрын
I have been having a lot of problems with bearings lately, made in India.
@vlanzerada5 ай бұрын
do some motorcycle rebuilds on the motor ...whenever you can like a cr 500 or yz 490...........
@SandraOrminski5 ай бұрын
hey chad will she pull the wheels slightly off of the ground. gotta see her run!
@joshuawormington28805 ай бұрын
Do you have any plans for that firebird under the carport? I’ve been seeing it in your videos for a while and have always wondered if you were going to build it and make some videos on it.