Can Your Workbench Do This?

Link for Folding Workbench written and video plans: www.etsy.com/T...

[@kramersells]

Why not lock in the top first instead of holding it??

[@Happilee97]

Looks like his arms aren’t long enough to reach the top locks until the center support is removed.

[@wendylambert2717]

To show his strength! ❤

[@David-wg7bj]

Thanks for pointing that out as well!

[@xxstreme]

😂 i think same, it was wrong step. even on deploy

[@DG.2030]

@@Happilee97Lool that’s sarcasm right ? He’s hand is right next to the lock while he’s holding it?

[@jasonmcmaster4968]

I’ve seen a couple of designs like this and love them. One thing i have incorporated into my design is an additional cross brace. Everyone uses a single cross brace but by adding a second brace, I can put a piece of plywood on the bottom as temporary storage for tools/small parts that I’m working with during my projects and not clutter up the top of the table.

[@ThomasCustomWoodworks]

Great idea!

[@Tadjourah]

​@@ThomasCustomWoodworks àaaa01❤❤😊❤❤❤❤❤

[@ALCRAN2010]

​​@@Tadjourahurther more, you can widen the holding braces that go on the wall, so as to accommodate the lower plywood piece, the the rest of the table as shown here, all in one spot.

[@allenkotlan3606]

" temporary" storage with an inch (25mm) of sawdust over everything as it works in my shop.

[@jasonmcmaster4968]

@@allenkotlan3606 why you gotta attack me like that? You don’t know my life. I mean… you’re 100% correct but you don’t know me 😂

[@luisadicki4445]

Really awesome , I like it, looking forward for your next video, keep it up!

[@bcroft68bc]

Fantastic idea for the man that has to store his tools away because he doesn’t always have a project to work on and is either working in a small workshop or his garage, (Like me).

[@angelamapes7553]

I need a dining room table I can do that with. Awesome!

[@ThomasCustomWoodworks]

Thanks!

[@stephenowens5375]

I need a wife I can do that with.😁

[@papparocket]

One suggestion to reduce the wobbles common on this type of fold-up bench with an unsecured cross brace is to put a threaded insert into each end of the cross brace and a hole in the bottom leg brace that lined up with the insert so that a bolt with a washer will go through the leg brace and screw into the insert. A knob on the end of the bolt would make it easy to tighten by hand. As suggested in another comment, add a second cross brace and lay a piece of plywood over the cross braces will you get some temporary shelf space is a great idea. Plus a second cross piece with the same threaded insert in the ends of the cross brace and bolts through the leg brace would lock the base together so firmly there would be little or no wrack to the workbench. The negative is that it would add another minute to set up and take down times.

[@MyrtaLopez-wn2xz]

SIMPLESMENTE. EXPETACULAR. ADOREI !!!

[@raymarshall2995]

You made that look easy, but I still saw how much control, and muscle it took to lift that table, steady it, and hold it carefully. That sucker is heavy!

[@lindapack3229]

Listen fantastic idea for workshop whether it be for a woman or men thanks for showing❤❤❤❤❤❤

[@ThomasCustomWoodworks]

You’re welcome!

[@angelitolegaspi9222]

nice idea

[@Gods1servant]

Excellent idea!!!

[@ThomasCustomWoodworks]

Thank you!

[@sanderg9106]

This looks very very similar to the foldable workbench by diyforknuckleheads...

[@Krista-k5v]

LOVE THIS! AWESOME IDEA! Making them fold and even roll is great because then they can be stacked easy! Film crews that have to recycle wood should do this and make tables and workbenches that can be reused out of the construction wood!

[@veralpereira]

Excelente trabalho 💯🇧🇷🔥🔥

[@tedihermawan6105]

ilmu yang bermanfaat

[@VanShelter]

very convenient

[@HannadayFLO]

Wonderful! A kitchen table would be great like this too if one had limited space.

[@dandagaiola4750]

É show de bola ficou muito legal parabéns 👍 👍 👍 👍

[@nubiagoncalves8505]

excelente! quem sabe um dia eu possa fazer assim com todos os meus móveis. sonho isso sempre! tenho muitos gatos iria me ajudar bastante. incrível genial!👏👏💯👍

[@ezzatramadan5987]

Very good

[@ThomasCustomWoodworks]

Thank you!

[@AnaCristina-hh9xe]

Ideia genial parabéns gostei muito

[@Normal1855]

Nice table.

[@valnicebarbosa5871]

Amei, pra quem tem pouco espaço como eu, é uma maravilha. Valeu a dica.

[@malabarista2023]

Excelente!! Felicitaciones!!!

[@nickmartinez7163]

Great job 👏👍👌🙌

[@ThomasCustomWoodworks]

Thank you!

[@MarcelMarcheschi]

C'est Super !❤😁

[@josefreitasoliveira4547]

Excelente trabalho

[@حقاليقين-ح2ض]

عمل متقن واصل

[@qualitydigitalvision]

Wow Excellent superb very nice

[@JTodd-fp2ve]

GREAT!!!! 👍

[@tomnewland8715]

Thanks for going to effort to put on line. Love mine

[@silvaniasiqueira5456]

Top essa ideia👏👏👏👏👏👏

[@wenepzoli]

Super cereative! Good day! Thanks shareit!

[@RandyHollis-tx6zc]

Thanks!

[@ThomasCustomWoodworks]

No problem and thank you!

[@Md.HumayunKabir-n4n]

good

[@faustovera1097]

Muy buena idea 👏👏👏👏👏 pero sería bueno si nos pasa, un video cómo se hace la mesa, ho las medidas 🙏🙏🙏 gracias !!!

[@linamulina5716]

Cakep buat meja nya irit tempat

[@ThomasCustomWoodworks]

Thanks!

[@CAESAR_PUTIN_LOVERS]

روعة .. Nice job ♥️🙏

[@toddcrockett]

I made one similar to that. Everybody wants me to build them one. lol.

[@kriskeffer]

Love this!!!

[@jtlifechannel9134]

Wow great idea🎉

[@andersonribeiro5844]

Gostei otimo

[@Sophiaboneu_]

Nice🎉🎉🎉🎉

[@mochafit42]

I need this so bad

[@mahfoud514]

Bonne idée mai un peus compliqué

[@frankbullitt4556]

very cool idea

[@ThomasCustomWoodworks]

Thank you! Cheers!

[@user-hk8si8gt8xni]

Jizzaxda is very good place to live and enjoy the same thing as soon va boshqa ko'ngilochar dasturlar milliy va har bir inson o'z oila a'zolari bilan bir necha yil ichida bir

[@deldom174]

Excellent

[@joebourke1018]

Cool 👍👍

[@ThomasCustomWoodworks]

Thanks!

[@gabrielmorales1066]

That’s amazing

[@soarebv]

Cool

[@graceoverall]

A brilliant design, but I would improve a couple things. Namely, spring loaded locking pegs for the legs instead of the cross bar, and also make the bench long enough to accommodate traditional casters instead of the side mounted ones that would buckle under heavy loads over time.

[@FrancisFurtak]

Yeah man, too cool!

[@swiftraider759]

This is really cool. you don't happen to have a step by step video building this do you? this would be a cool weekend to weekend project.

[@ThomasCustomWoodworks]

I have detailed written and video plans here. Enjoy! etsy.me/3IFzI34

[@bienletemknowchannel]

Amazing

[@Da1stDay]

Great idea.

[@danielcontreras2299]

Use slam latches instead and you don’t have to worry about holding the table to remove the leg brace.

[@javierortega8024]

Me encanto

[@ThomasCustomWoodworks]

Thank you!

[@luizcoloniese2700]

Eu vanda barros. Maravilha.

[@tomthompson7400]

a simple latch on the top bracket would make life a lot easier , like a garden gate latch

[@abdullahjan8824]

Ketny ka he

[@tomthompson7400]

@@abdullahjan8824 probably

[@simonjaviergarciaruiz9055]

CON LA MITAD DE MADERA QUEDA FUERTE Y MÁS MANEJABLE .

[@azwarchaniago5592]

Mantap sekali

[@reachmbg]

Supeeerrrr👏🏼👍🏼

[@tukangkayujawa974]

I like it 👍👍

[@crystalvanchure2759]

I add chain so when bringing down it doesn't break or hurt anyone

[@claudioperandin-428]

Ottimo salvaspazio 🔥🔥🔥

[@ZZZ-qy8wj]

Let's see how that works out for you as you get older. The best inventions are the ones where even a senior citizen can use it or do it.

[@anthonydewayne712]

My work bench has stuff on it from the work I do.

[@toroah]

haha you have no idea how much time you saved me... lol i was about to say i'll make this over the weekend... and then i read your comment and was reminded my bench always has stuff on it too lol.

[@Chris-fl6fx]

Not to speak about having no empty wall available because off all the materials, tools and machine you (want) need to have to get the job done. 😅 Nice job and idea though !

[@javierortega8024]

Genial😊

[@eliasaragon2746]

those are 4x4 legs, he's doing it so the weight will stay proportioned and not yank down the board with the hinges off the wall.

[@VlogAntoTv]

Mantap bosqu

[@anuragalvino7630]

Good work yet looks hard to put on

[@nancybarrett6266]

That's Badass 😊

[@ThomasCustomWoodworks]

Thank you!

[@RusydiRabbani-kf1jk]

Goodd!!!😅😅

[@Ricky-eg3wd]

Very nicee

[@ThomasCustomWoodworks]

Thank you!

[@FreeWilly2021]

👏🏻👏🏻👏🏻👏🏻💪🏻

[@manchitaaguilar3547]

Muy ingenioso

[@ThomasCustomWoodworks]

Thank you!

[@ConectadosHoje]

Perfeito 👌

[@NemesisVNV]

Great idea, I'm curious how sturdy it stays in place with those casters. Depending on the work being done I imagine a lot of jimmys and shakes?

[@jorgebiase3348]

AMEIZING

[@ThomasCustomWoodworks]

Thank you!

[@dkpbyt]

I believe there’s a better sequence of stowing it.

[@1terraforce]

This video makes me hate my garage so much more than I did previously 🙄

[@Nusremmus]

I dig it, but I'd try to work a french cleat in there somehow . LOL

[@Hunter-d3y]

That would be the most useless thing for my workbench to do, it is literally never cleared XD

[@ShivamSharma-zd8lw]

haha i agree

[@Artbytcheishvili]

👌👌

[@linamulina5716]

Bisa juga buat tempat tidur juga kl ya

[@mahendrarajaharumugam9159]

Yes I can Do this bench👏🫵😃🫡🇨🇦

[@kazuittyan]

超力技 しかも 作った本人しか使いこなせない

[@rickh129]

Good idea, but that wastes a whole wall if I play devil's advocate.

[@elenicemartins2271]

❤

[@kfawell]

That is cool, but that's a lot of wall space.

[@getinkt338]

If my ladder is in the way, I do something else. All joking aside, gorgeous idea, great craftsmanship, but you can’t use it in under a few minutes, assuming you put nothing in front of it you have to move (big workbench shaped spots get filled quickly in my shop) I guess I just don’t see the overall point unless you don’t need it that often, if that’s it, but a folding table for $50

[@JHennyXIII]

This is a cool idea but I couldn’t relate less to wanting to put AWAY a workbench. Lol

[@ThomasCustomWoodworks]

Haha

[@joec3247]

I Like Those Casters, What Are They Called, Where Can I Get Those? Great Bench Idea By The Way, Very Creative!

[@derekhobbs1633]

song name?

[@timm4264]

I made this, but I’m having trouble with my legs still folding out a little further than 90 degrees. The support bar then falls out of place. Any ideas to fix this? I did make another support bar that went on both sides of the leg brace but it snapped the end off of the board when rolling it around

[@be8ch311]

I would like to know the size of this table. pls

[@marciochaves4700]

👏👏👏👏👏👏💯👍✌️

[@aaronag7876]

With the 2 black bolts at the top, could you not have used the table legs support beam, the one you put and rest on the top of the table, after putting the table on the wall ? Use the support beam in a way to hold the table onto the wall, seeing as it is wide and would require a few wooden twist wedges to hold the beam. Just seems 2 little bolts are not strong enough and the weight of the table will pull them off the wall

[@FknNefFy]

Might want a back plate. Your wall is not gonna like that edge when you lift it up each time

[@reynoldmiguel6463]

Looks like he already damaged the dry wall. (Bottom right)