THRASHIN SUPPLY T BARS INSTALLED ON A 2024 ROAD GLIDE CVO ST! *MUST HAVE*

[@DOOWORKMOTORSPORTS]

*Disclaimer* The stock cables work with this handlebar setup! No extended cables needed!

[@KennethSmith-k7l]

I just want to tell you I just had my cvo-st r/g dump with a 135 kit it made 165 hp 158 torque it’s a beast

[@DOOWORKMOTORSPORTS]

@@KennethSmith-k7l That's great power!

[@RichardJohnson-c6y]

I have a 24 road glide and I’m looking for a set of risers for it off of a 24ST

[@mountainmusclecarsclassics3172]

@@RichardJohnson-c6y i got u

[@bearbrewer8517]

That looks better than stock. I took my new CVO ST out yesterday for the first time. Just a little ride and I definitely want different bars. Me being 6’3” it was a little uncomfortable.

[@OnyxCVO]

Finally a new video heck yeah, just got a 2024 RG CVO ST as well, waiting on my Trashin risers and all components. Went all out on Trashin chrome parts as well. Something different this time. I have always blacked out all of my bikes...

[@steveg56]

I have the exact same CVO ST and I just did this same riser bar setup yesterday and would have loved to been able to see this video before I tackled mine lol. I ended up taking off the top triple tree just cuz I didn't think I could get to that bolt from the underside but you made it clear that you need full lock to get to it so maybe I did some extra work that I didn't need to. Mine came out great as well and they are super comfortable. Great idea to powder coat them gloss black I didn't think about that but still looks really good either way, nice job!

[@LouisEvangelista007]

What does this setup cost to do yourself and what parts needed? Thank you

[@RichardJohnson-c6y]

Those handlebars and risers look really good, I’m jealous

[@christopherashley8166]

Looks really good bro

[@christopherashley8166]

I went with the cvo st bars on my 2024 road glide 117 and you are correct about the comfort of those bars long distance. At some point I’m gonna switch to the thrashing bars set up

[@anthonynunez6220]

I need these for my bike thanks 👍🏽

[@robertfagan8833]

The risers and bars look fantastic especially powder coated great set up. I had it on my other bike, but I personally have a cvo st and I love the bars stock. I’m not changing mine. They feel good. I love the looks of them. I’m not touching mine.

[@RichardJohnson-c6y]

I also have an ST and I am loving. It. Only thing is I see a lot of vibration in the mirrors from 2800 RPM and up. How about you?

[@robertfagan8833]

@@RichardJohnson-c6y no not really

[@jean-pierred1094]

Looks great! Ordered the LA Choppers 8” riser 1.5” pullback for mine. Looks great too. No need to change the original handlebars since this riser fits 1.25 handlebars. I like the Original CVO ST handlebar fit. Just too low and too much of a reach for now… Should be getting them installed this week. Also made in USA…and quoted 2h install.

[@MEGATRON_1247]

I got this set up on my CVO as well. Love it

[@Yumyum197]

Bike looks Killer

[@dwight072]

Looks killer. I want to do the same set up on my 24.

[@markmcintosh7095]

Looks great. I have a black CVO st also, and so far, stock bars work for me.

[@iginogasparini3369]

I agree 👍 💯 percent did the same first day I got mine at home

[@duece228]

Sick video! Thank you for sharing 🙏. I think I may have found my solution and saved this video for future reference. The stock bars sort of bugged me on shorter rides but I rode 1500 miles a couple weekends ago and my back was KILLING me by the time I got home (first world problems 😂). Thanks again 👊🙏.

[@gilbertmal6033]

Looks sweet driver. 🤙🏼🤙🏼

[@glennsgarageshop]

Just came across your channel and subscribed. I'm taking delivery of the same bike (only White) this week and think you sold me on this handlebar/riser combo. I'm going to check out what KRAUS offers also, only because they're local (St. George, UT). I look forward to checking out your future videos!

[@levi2040]

Looks good!!! What is the distance from stock handlebar location to Thrashin location? How much does it move the bars toward the driver? I am considering doing the same mod since long rides make my shoulders and back hurt in the current location. Good job. Thank you

[@ErnieGill-sy3iv]

Looks great

[@blakeb550]

Wow that looks awesome and thank you for all the details. Just wondering, was the clutch cable is long enough, and did you have to change the routing of it?

[@DOOWORKMOTORSPORTS]

Yes, all of the factory cables reach just fine! No extended cables needed!

[@RidingwithDRod]

Powder coated definitely makes a difference. I would prefer an 8” bar or 6.5” pull back with mid or high bend bars. Riser looks a little too tall for a performance bagger. Nothing like what’s used on the track but that’s the style anyway. Thanks for sharing

[@BluAlualu]

Cool video I might have to change out my handle bar for my 2024 CVO RG ST it does look like it’ll be more ergonomically comfortable for long rides. I’m hoping you can illustrate full handle bar lock turns on both sides comfortably my stock handle bar feels like I’m reaching too far when in full handle bar lock in turns and I can’t seem to operate the clutch and throttle effectively and efficiently when I’m in handle bar lock positions 🙈

[@DOOWORKMOTORSPORTS]

These bars are much more comfortable and ergonomic than the stock bars. Highly recommend.

[@fairlydangerous]

How is the vibration with these risers? Did you use solid bushings?

[@DOOWORKMOTORSPORTS]

No vibration at all with solid bushings..

[@mountainmusclecarsclassics3172]

looks great ! How long did this handlebar job take to cpmplete ?

[@DOOWORKMOTORSPORTS]

About 2 hours.

[@mountainmusclecarsclassics3172]

@@DOOWORKMOTORSPORTS thanks you did a clean install ! My local HD dealer quoted me 9 hours 🤣 and said I need new custom brake lines . For this same set up . I’m about to do this myself when I get them back from powder coat .

[@DOOWORKMOTORSPORTS]

@@mountainmusclecarsclassics3172 Yeah these dealers be taxinnnnn. You can do it using your factory brake lines.

[@tonypaniolos8842]

Sick !

[@SleekHobbies88]

Heck ya gorgeous bike I have indian FTR 1200 s love it America baby

[@24james]

I prefer the OEM bars, but to each their own. Damn sweet bike though 🏍️ ✔️🇺🇸💯🔥♥️👍🏽

[@EvaMorello-mz9hh]

When you run the wiring from each side, you come out in the center straight down in between the risers Now I will have to zip tie those wires to each riser. Otherwise you’ve got wires hanging out in the center, which doesn’t look too good.

[@jasonreed4045]

Does the solid bushings come in the kit?

[@DOOWORKMOTORSPORTS]

No, you have to buy those separately from them..

[@ja-asiabaker869]

How long did it take?

[@DOOWORKMOTORSPORTS]

About an hour..

[@michaelwynn6969]

Did you have to take off the lower side fairing to get to the riser bolts?

[@DOOWORKMOTORSPORTS]

No.

[@michaelwynn6969]

Waiting on my heated grips before I install my bars.@@DOOWORKMOTORSPORTSin wai

[@freshfruitful]

I’m assuming you used the stock cables. I was looking at the 12 inch setup but want to use stock cables if I can

[@DOOWORKMOTORSPORTS]

Yes! Stock cables work!

[@RK-de5wg]

I feel the stock bars are too wide. Do these bring them in a little narrower?

[@henrytran3642]

Did you guys need to extend any of the stock cables/wires?

[@DOOWORKMOTORSPORTS]

Nope!

[@henrytran3642]

@ Thanks 🙏

[@kevingillilan4629]

What front rotors are you running?

[@DOOWORKMOTORSPORTS]

These are the stock rotors that come on the CVO ST..

[@jacobiballs7699]

Where did you get that little cover that goes in between your t bars that the wires are going down through.?

[@DOOWORKMOTORSPORTS]

It came factory on the bike..

[@EvaMorello-mz9hh]

Daddy needs a New shinny floor 😂

[@DOOWORKMOTORSPORTS]

Can't afford it

[@takoathomas7266]

I gotta ask what do you dofor a living my man

[@Jhood0729_jerrymesser]

Nc In Da house

[@jiriza84641]

How tall are you Im 5'5"? ive been looking at these bars from the standard RG bars which few a bit to wide for me, just want to make sure I can still see the screen.

[@DOOWORKMOTORSPORTS]

5'7" you can see the screen no problem!

[@RichardJohnson-c6y]

Good morning I have a new CVOST and I noticed that around 2800 RPM and up mirrors are unclear. Wondering if you have experience this with your ST

[@DOOWORKMOTORSPORTS]

Have not experienced that yet..

[@jbirdspears7974]

🤔 don’t like the exposed wires showing in the middle at all.

[@dwight072]

Make a hit on that thing.

[@DOOWORKMOTORSPORTS]

Dragy Videos coming soon!

[@Voge21]

God damn I need your family’s money. Hell yeah bro spend it like you make it.

[@salvatoredantes1690]

Nice bars but you gear shift like you're riding a royal enfield. That's a serious engine bro. Driving that bike in 5th gear at 62 miles an hour is like your first two weeks on your first motorcycle. I have a 117 and the highest gear I would do that speed in is 4th and no ive never had any engine troubles ever on any of my bikes. That engine isn't designed for cruising alone, it's a hotrod. The only engine that ever put the Honda vtx 1800 in its place.

[@branded72.]

all that work/money to make the black match and the bolts dont match.

[@DOOWORKMOTORSPORTS]

???

[@branded72.]

they have blacked out or anodized black bots to match the raiser instead of chrome​@@DOOWORKMOTORSPORTS

[@jasonfrost2895]

😂

[@Consciousrider]

Aesthetically; tbars are not the best look on baggers! Shits look like a kids tricycle

[@otisharris4213]

Thanks 🙏🏿 for the post I will stay with the original bars

[@kellybgliding]

Looks really good bro.