How To: Choose the best Risers for your Harley-Davidson!

[@Mordorer]

Well said I learned a lot. It’s cool to know that you can dial in your comfort with so much product to choose from. All sizes and shapes. I have straight but was looking at the pullbacks without losing my height.

[@millertime269]

Higher the riser higher the horsepower that’s just facts!

[@juancarrasco6598]

I have called more than a handful of bike shops regarding this type of upgrade. I received more information from arching your video, than calling all of these shops. Thank you. Be safe.

[@Ladyvieves]

I’m in the process of changing my risers and handlebars “again”. This was super helpful. Thank you🖤⚡️🤘

[@THRASHIN]

Thanks for watching!

[@mdlallemont]

You did not cover the extensions you mentioned. I know you have ½" and 1" but I'd like to see what is involved in adding them. And are you ever going to offer a 2" since what would allow someone like me to buy the gauge relocation and tree setup without needing to buy new risers and still get the same height.

[@kathyhebert8140]

I ordered the 6.5 risers with 1.5 pullback. And, the Mid-bend handlebar with a 5” pullback. I’m 5’5” -30” inseam. Also using the Saddleman step up seat. Hope

[@travisshatswell1421]

How did it come out?

[@eddiebones20]

I'm 5'8 and my 05 Deluxe (stock bars since new) feels a little cramped (distance to bars) and pushing them forward made things more comfortable. I'm considering a straight 6" riser with mid height bar as I don't want full apes and a straight bar/tall riser would look odd on this bike IMO. Hoping I can get away with same cables, brakeline and wiring.

[@ec2935]

Just bought my 2022 Low Rider S and was super confused on how to go about getting my riding position just right. I'm on the shorter side and I find myself leaning forward to get to the bars. This is putting some serious strain on my shoulders and lower back. I had someone measure out where a comfortable riding position was and they recommended close to a 10" rise with around 3" pull back. With that in mind I'm thinking of getting your 9.5" with pull back. So much to learn with my first bike!

[@alexandervicta]

What’s your height?

[@FranBunnyFFXII]

I just wanna add... Dont be afraid to go lower and Adjust things! Tall doesnt work for everyone. I used the harley 4inch pullback fat riser which is barely taller than the stock riser but has a nice kickback. It keeps the bars low, and I lowered the bars down angle wise as well, and then turned the control modules down so the levers would be much further down. So much more comfortable, and so much more control. I would love more riser options that are kick backs instead of raised up.

[@mattfxlrs7643]

Great video guys super appreciated 👏 Have you boyz ever thought about making your own brand of t bars, Maybe in something like a 1 and a half inch or 3 quarters thick. Like burleigh bars Australia ?

[@ToyodaJake]

this helped me out tons

[@THRASHIN]

Awesome! Glad we could help!

[@STAYHUMBLE302]

You also went a slight slight bend in your elbow like lances dyna set up if I’m correct if your to straight out your hands will go numb after 100 miles I run 13.5 Pull back at 5,10 and there perfect!!!!!🤙👊

[@sharkdog111]

Great video guys. Love the measurements, along with visually showing the bars on the bikes. Perfect!

[@06wrxdude]

Aww thanks for the info. I gotta make some thrashin upgrades to my bike 😎

[@randyvanvliet226]

Keep in mind, also, that your SEAT height will also affect your selection of your bar and riser height too. Also the angle of your forks. Some forks are 28 degrees, some 30, some 32 degrees, will affect the amount of pull back you might want.

[@susdad]

Hey , you wanna race my Roadliner? You name the place and time buddy.

[@d-lowz-no9931]

I just checked out this morning, $811. Got 8” hole shots, aggressive mid bends, bushings, grips, throttle tube, end cap and bunch of other random gear that I wanted. I’m about to dial in my bar setup bro! I’m stoked 🤙🏽

[@rhansii]

Would your risers fit a 05 xl1200

[@DeafStunts]

Thank you for the awesome video and showing your comfortable position on your bikes with your pull back riser.

[@Ben-et8wh]

it would help to know how tall you 2 guys are as well

[@jetme8815]

The metric is: sit on your bike, put your arms out in front of you, hands just a little lower than your shoulder, measure from your hands to your fork head. That is the combined "best place to start" height for your riser / handlebar combination. The rest is fine tuning and what look you want. Easy / Peasy.

[@NeatFreq]

Super informative, Can't wait to get my 9.5" riser order. Love my ThrashinSupply stuff, keep the videos coming guys

[@that_ride_was_epic2931]

I guess the 4“ risers would not work to add them to the SG ST because of the fairing, correct? I have a V-Team ape hanger but Beet to add some inches…Thanks all for answering that question!

[@tapout123ism]

Awesome video guys definitely informational stay rippen

[@AleisterBehexen]

I have a 2008 FXDL I did 8.5 risers with a pullback and low bend bar. Does anyone know if I can use stock cables?

[@Group_Anonymous]

For the new Low Rider S; you should sell just the bottom clamp portion since the factory gauge is located on the top clamp portion.

[@jeremyslaughter2199]

8 inch straights with the high bend bars. 🤙🏻🤙🏻🤙🏻

[@Mordorer]

Well said I learned a lot. It’s cool to know that you can dial in your comfort with so much product to choose from. All sizes and shapes. I have straight but was looking at the pullbacks without losing my height.

[@Sendheal]

@2:36 "I sat on the bar" kinda sus

[@THRASHIN]

😆😆 no script! I meant bike

[@itsflavin4835]

Are there 2.5in pullbacks out there? Dont want to rotate my bars

[@jetme8815]

Great vid guys!

[@Lee-cz7ht]

Is there a fix for the speedo on the '23 LRS, which when you fit pull back risers, it faces on a downward angle, and you can't see the display properly?

[@kevinkasich4822]

I’m 5’11” and just got my first Harley…a 2023 Lowrider ST. Any recommendations on which risers to make things a bit more comfortable? Probably going to continue running the stock handlebars for now.

[@THRASHIN]

What up Kevin? Check this video out kzbin.info/www/bejne/q4K9oZZvadOfntU Many directions to go, call us Monday for more help 818-626-8350

[@narule2695]

580 dollars they can't include 2 1/2 inch bolts to mount pretty sad really guys 😕

[@THRASHIN]

A big reason we don’t include hardware with the risers is because many applications require different length and even bolt style. Some require longer or shorter bolts and some require Allen heads while others require hex. Trust me, I wish it was as easy as supplying or recommending the same bolt for every bike.

[@martharoman8783]

Can you tell me how tall Juan is? I like the set up, but I am a bit curious how tall is so I can compare how I might look on it based on height.

[@THRASHIN]

Juan is like 5’8”

[@tommytaing6747]

Will the 9.5 pullback be better for shorter riders. Or the 6.5 “ pull back ? I’m 5’5.

[@davidmatias6239]

Although not the same bars but I have 12” La choppers hammer heads on one of my RGS . I am also 5-5 and my arms are pretty straight. I’m planning to get the 6.5 pullback with a 1” add on with the low profile bars totaling approximately 10”.

[@karaokekid7189]

I just got a 2004 Harley Softail Deuce with a 1.5 diameter Fat T bar. I need to get about two more inches higher which will bring the bars back as well. Who makes these 1.5 diameter risers in chrome?

[@keithmyles7086]

Just bought a 2020 soft tail standard and I called Harley Davidson asking about risers and they can't even tell me if one exists.....any ideas?

[@gregoryunderwood4121]

Great video and a great help!! Thank you!!!

[@THRASHIN]

Thanks for watching!

[@tinaneilan750]

I’m a short rider. I’d like the bars closer to me. Is it pullback risers that will do that

[@THRASHIN]

Yes, this will help 👍🏻

[@justfine77777]

I just got a 2022 street Bob. I’m going to do a step up style seat. I like a mx bend bar with a teller riser. The street Bob has the two display screens. I need a clamp that will accommodate those, and I’d like risers that I can run the ridiculous number of wires through. I’m open to suggestions on a set up.

[@gabrielgonzalez4914]

Hey would 1 1/8 inch bars work with the risers?

[@davidmguire5726]

Need help im looking for 6.5 Risers for my 2020 low rider s could yous send me a like to the rite ones i need

[@DanielTojcic]

Will you be making the holeshot risers with an integrated hud top clamp?

[@snay-drian6742]

Currently in the market for Dyna parts. Definitely want to ditch the apes on it and go with risers. This was helpful! Thanks 👍 love the videos teaching stunt techniques too!!

[@elitewaver2835]

Not affordable lol

[@mikedarrow3374]

Just ordered 9.5" pull back for my LRST thats due in NZ any day now . Great videos as always .

[@matthewduggins6390]

Of I put the 9.5 pullback risers with the adapter plate and the mid bend bars do I need longer wires and cables?

[@THRASHIN]

We have seen it done… but no promises. Harleys cables/wire lengths very

[@matthewduggins6390]

It's on a 2022 road glide I got the 6.5 but it's too short what would you recommend

[@ironkid8836]

What height is Juan? Cos my new bike has 12 inch bars but i haven't sat on it yet

[@707LAKE]

curious how tall you 2 are? all arms are different, but more info never hurt

[@THRASHIN]

Both of us are about 5' 8"

[@707LAKE]

@@THRASHIN thanks man

[@MattCassCook]

Am I going insane or did neither of you say what height you are 🤔

[@THRASHIN]

Juan’s 5’8” Lance is 5’9”

[@mrks_motorcyclist]

You should also sell your products on the European market!

[@Show-TimeJ]

Keep those videos coming!!!

[@joejunior1974]

Why don't I see any of this on your website? Is it out of stock?

[@John.Kramer]

I assume that I can still purchase the Thrashin Riser for the '22 FXLRS as long as I get that Street Bob/Low Rider ST guage.. am I correct or a little off? Anyone know...thank you in advance

[@THRASHIN]

Yep! Just would need to get the digital gauge from Harley

[@John.Kramer]

@@THRASHIN sweet! Thanks dudes!

[@HarleysRnarleys]

Could anyone help me what would be a good size riser or bar to stunt with I have 14 t bars but been told they’re to big any help is great help im 5’11 with a 2020 sportster

[@THRASHIN]

I’d go 6 or 8 “ straight with mid bend. If you only riding wheelies, possible mid bend aggressive, if you also ride the bike around, go regular mid bend.

[@HarleysRnarleys]

@@THRASHIN same set up for drifts to?

[@dinkydotzero]

I want the largest most colorful riser made, you know something that really makes me look like a knob rolling down the highway on my SOA clone club bike, Yeah chicks will want me and men will want to be me lol

[@THRASHIN]

Sorry we only got black or chrome… gotta keep looking for something colorful dinky 🌈

[@danielrivera6167]

Like a few companies that make amazing bars and risers etc. I have no doubt in my mind that the quality of workmanship, when you as well as every channel I try to use to determine what is best for me, there is one thing that is overlooked. How tall are you? I wish you would add these kind of specs when you review your products. Thanks.

[@THRASHIN]

What up Daniel, we are both 5’9” 👍🏻

[@PearlMetal666]

Got to swing a leg over a Fat Bob 114 with your 8in pullbacks and bars at the dealership I work at. Had your bags too. Exactly how I would do it!

[@THRASHIN]

Hell yea! That’s rad

[@vmotobiker]

Clear and to the point, thanks guys!

[@THRASHIN]

Glad that you liked it! Thanks for watching!

[@DennisKirk]

Great info!

[@kylemattix5561]

Will your risers work on a 2018 hd 48?

[@marvelharris9540]

How tall is Juan?

[@THRASHIN]

5’8” on a good day 😂

[@Ovisen]

Support from Sweden 🇸🇪🤘🏼

[@soldier4christ339]

Take that fanny pack bag off the handle bars,you can’t even enjoy the look of the craftsmanship on the bar/riser set up’s aauuggghhh 🤦🏽‍♂️🤣🤣🤣

[@ianguttendorf9662]

Which manufacturer cable/line/wire extension do you prefer?

[@THRASHIN]

We prefer OEM Harley cables when possible. Otherwise Barnett and Galfer make great stuff.

[@frios011]

Clear as mud now.

[@ironkid8836]

I see the saddlebagsnon that dyna belonged to lance do they need supports? Also need saddlebags for my dyna street bob but hate the idea of moving the indicators

[@THRASHIN]

Our bags don’t require the indicators to be moved. The bag is structured and we supply you with the hardware to rock and roll! www.thrashinsupply.com/collections/bags

[@ironkid8836]

@THRASHIN cheers bro I like my new bike the way it is murdered out with contrast cut bits cheers I'll check em out great videos too

[@ironkid8836]

@@THRASHIN also do ye have a European stockist ? I am ireoand myself

[@efeconker]

Do I have to buy an extended cable for speedometer ? Thanks.

[@THRASHIN]

Depends what bike…

[@efeconker]

@@THRASHIN its 2020 fxbb, should İ ?

[@airsoftkids2299]

Re make this video with baggers

[@THRASHIN]

The principal stays the same… and we have tons of videos on the bagger set up… have you checked them out?

[@PkwyDrive13]

Risers are just sooo expensive.. It's crazy! I want 12" and bars instead of the 13in lucky daves I have. But the cost is over double.. Can't afford it right now 😔

[@deonnawilliams4903]

Hey Tyler do you mind me asking why u willing to trade in your llucky 13s ?

[@deonnawilliams4903]

your*

[@davidmcdaniel7184]

Do a riser and pull back for a ultra limited.

[@THRASHIN]

We have one for that… www.thrashinsupply.com/collections/baggerparts/products/street-glide-riser-adapter

[@THRASHIN]

All of our bar and risers will work on your ultra with this adapter

[@rodsigala7846]

So if I'm 6'2 what size do I need for the risers

[@THRASHIN]

Depends what bike

[@rodsigala7846]

For 2017 road glide

[@bt5049]

If you’re not first, you’re last.

[@DarinMury]

Im sorry but I think it ugly

[@jacobchristopher209]

Who asked?