Рет қаралды 1,233,501
In this video we will show you how to thread Chinese overlocker/serger Meishi GN1-1. It’s not hard, but it’s tricky.
►NOTE◄ First unplug the power cord for safety!
Use tweezers to thread the overlocker easier.
☼ Threading the upper looper: 0:08
►NOTE◄ Removing the side plate is optional You can thread the upper looper without removing the side plate. However, if you remove it - use a magnetic screwdriver, because the screws are very small and you can lose them.
☼ Threading the needle: 2:48
In my experience I found that the tension dial on the needle thread should be tighter than the upper and lower loopers. But this may vary for the different types of threads.
☼ Threading the lower looper: 4:27
►NOTE◄ The flywheel must be rotated only towards the back of the machine /clockwise/
🧶 Like & Subscribe for support!
❤️ Facebook: goo.gl/mC9cP0
❤️ Instagram: / artofclay.bg
📧 Collaborations/Sponsorships: artofclay.bg@gmail.com
☕ Enjoy the content? Support me with a 'Super Thanks'! Click the button below the player to buy me a virtual coffee. Your generosity keeps the content coming! 🙏
►MUSIC:
Intro - Jim Yosef - Lights [NCS Release]
Defqwop - Awakening [NCS Release]
OUR PLAYLISTS:
★POLYMER CLAY: goo.gl/rMdqFJ
★POLYMER CLAY TIPS: goo.gl/aq74YG
★SEWING FOR BEGINNERS: goo.gl/GFriEQ
★DIY IDEAS: goo.gl/Y9chwi
★GARDEN: goo.gl/xhIbDk
★BLOOPERS,OUTTAKES & BEHIND THE SCENES: goo.gl/Ljj6fk
★FACEBOOK PAGE VIDEOS: goo.gl/tgWB05
===============
CHECK OUT OUR SECOND CHANNEL:
►goo.gl/z4QjW8
❤FACEBOOK PAGE: goo.gl/FmVBFh
❤TWITTER: / artofclayblue
OUR PLAYLISTS:
★FREE FOOTAGE: goo.gl/nPKi77
★TIME-LAPSE VIDEOS: goo.gl/g3bCfY
===============
♫MUSIC:♫
►Connect with Audio Library: goo.gl/MTsLfM
►Connect with KZbin Audio Library: goo.gl/vlaaZr
►Connect with NCS:
• / nocopyrightsounds
• / nocopyrightsounds
• / nocopyrightsounds_
• / nocopyrightsounds
• / nocopyrightsounds
• / ncsounds
• bit.ly/SpotifyNCS