Three House's washed today (when pressure washing is just going to work)

I Soft washed 3 houses today. In this video I will take you along on a normal day of working in my Small pressure Washing business.

[@Grinfas]

Cant wait to see a video in a year! With a brand new truck, 8gpm pressure washer! This guy is going places🙌💯🔥🔥

[@steppspressurewashing]

Thanks!!

[@EverymanEvangelism]

You are on a roll!!!

[@steppspressurewashing]

Easy to roll downhill!! Lol

[@AJK-3]

I’ve heard to be careful on wood. Doors, decks, etc. Is rinsing them before/after all it takes or is there more to protecting them?

[@steppspressurewashing]

Unstained wood will probably react whether you rinse before and after or not. Most stained wood i will rinse before and after. Most painted wood is no problem

[@chrisogletree883]

Nice work !! 😊 it’s getting busy what size tire and wheel do you have on your trailer? Thanks

[@steppspressurewashing]

Thanks!! It's a 15 inch

[@TANMAN84]

Are you careful around stained decks with your SH?

[@steppspressurewashing]

Not really, I rinse them after I wash. But I would say I am more aware on trex decking.

[@blakeh2518]

Do you rinse the chem with softwash pump or pressure washer?

[@steppspressurewashing]

All done through the Pressure Washer. Downstream injector triggered on and off by high and low pressure nozzles. I only get 500 psi on the x jet, but it's enough to close the injector

[@liveview1698]

What pressure washer do you use, and what 4gpm pressure washer would you recommend?

[@steppspressurewashing]

Pressure pro dirt laser. I would recommend it! Only one new pump since 2020

[@vcash1112]

Your down stream injector comes connected to your pump as one solid unit on your 4gpm?

[@steppspressurewashing]

My pump came with an adjustable DSI built in. But I have never used it. I use a GP external DSI 2.1 orifice

[@vcash1112]

@@steppspressurewashing Ok, nice! I want to do the same with my unit. So after installing the new DSI do you need to remove the ball and spring from the old injector? Do you have a check valve on you GP injector? Is the GP 10:1 ratio?

[@steppspressurewashing]

@@vcash1112 I never did disable the built in injector. No check valve, and I'm pulling 7:1 in my 2.1 dsi

[@vcash1112]

@@steppspressurewashing Thanks for replying! All the best!

[@alexisbarrera7789]

approx how much do you charge per home to softwash

[@steppspressurewashing]

$0.12/sqft

[@vcash1112]

Do you have a minimum?

[@steppspressurewashing]

Yep, got to have a minimum

[@vcash1112]

@@steppspressurewashing nice!