Three minute Plaster skim

[@Aceno13]

Would’ve taken half that time of you moved the plaster closer to you son😂

[@datheat2854]

Nice bit of spreading gezzer 👍🏼

[@rowey3364]

Put your bucket on crate save your back !!!

[@andyjamestf]

Always nice to see different approaches and techniques 👍

[@norocketsciencebuild5371]

Defo!

[@neilross9867]

Nowt wrong with that. If you've agreed a price with a customer and you're happy with how long you take then it doesn't matter how much you can get on or how quick you can do it. So long as the quality is there and the customer is happy then you've cracked it. I'll never have lots of money and neither do I want to. I get by, I'm happy with my work and so are my customers. And all my work is from recommendation so I save on advertising. Everyone's happy.

[@elleryjqueen1712]

Nice job, even if the title is incorrect, he is a good steady plasterer working at a good pace, made it look easy. Well done

[@adamohuiscin1756]

great job slow pace but that's your own pace what your comfortable with fairplay, also very clean work, I've worked with plasterers that throw it up on to the wall with speed and it ends up all over the place. don't mind the haters you did a good job looks good and clean

[@BrumCraft]

Quality job 👍

[@stealthwolf6369]

Just came here to read the plasterers slag off each others work .🤣🤣🤣 this can't be right though , there ain't plaster all over the place 🤣🤣

[@terry4144]

you"ve got more on your clothes than the wall

[@hafedsharif8453]

😂

[@Bigblackajack]

Shut up 🤣😂

[@kevinlee5368]

Good job 👌

[@damprotek]

I think he's playing with it too much it's only on plasterboard just whack it on and roll it off with a plastic straight edge it will be faster still he's got a nice technique

[@99marilena]

Nice job mate love watching plasters wish I could plaster

[@KC08RAS]

You can u just haven't learnt it yet

[@gss6531]

1 skim Jim

[@dilligaf2386]

Why was the plaster so far away? Great video though. I like my plaster like yogurt. If you spread really soft butter on bread it's so easy to get a nice even layer but if you try spread old butter on bread it ends up thicker in places. Creamy is the one for good even spreading.

[@supershev1888]

Why is your tub over the other side of the room

[@israeladesanya4596]

In the middle so he can do the other walls?

[@N1ghtstar4]

We can only hope not , would go off in the bucket by then , he’s not a bad plasterer but it was hardly what I’d call quick , I’ve only been skimming a year and reckon I’d piss all over the time he spent on that

[@stealthwolf6369]

Listen to all these experts making out they are loaded 🤣🤣 Tradesmen 🤣🤣🤣

[@petersparshot4997]

Good job brother

[@qazzell]

good job, technique is something you develop yourself and if it works for you great

[@patthebaker3575]

Did he scrim the joints??

[@Onlinesully]

very skilled guy. makes it look easy. and it's not.

[@robparky2029]

Well am not a plasterer and I thought that was quick but seeing some of the comments maybe that's slow 🤔 would still love to learn the trade tho looks satisfying

[@anthonywilliams2764]

Robert Parkinson it's just standard pace , not slow not fast

[@mranonymous8725]

Nice work mate

[@dannymactheatreoflife.1771]

Nothing wrong with taking your time why do some plasters think you have to run around like an idiot all the time need to chill out a bit 🤔

[@neveryoumind9237]

That’s 2 and a bit boards so roughly 6m2 and it took you that long to put 6m2 on 🤔😂😂😂

[@bandhsilvers1]

Nice little strokes from the corners out and one scoop lol I have 3 at a time and my mix is like piss and its much quicker from a spot board you should invest

[@CompetitiveEllisy]

So you take 3 scoops off the spot board? Why not just use your trowel?

[@jakeanderton306]

Takes me 10 minutes do that, only been doing it a year at college please don't bully me

[@peterfido8735]

Looks good to me ! so what if some people think it's clever to rush around making a mess. I'm sure if it was a bigger wall you'd have knocked it up a gear.

[@marcus2478]

No jointing tape?

[@Czajnikzgwizdkiem]

Knauf super finisz szpachlowanie plastering is relic

[@indigo19865586]

And I thought I was slow. Jesus. I put four trowel wort on my hand board. And drop none. That wall done in 7 mins and lay down if I do it.

[@Asborillo81]

On board 1 coat lovely jubbley .... 💰💰💰

[@seanried2928]

why doesn't he set up a mortor board its far easier to lift the scim, taking out of a tub is far to slow

[@jayengland4988]

Always start at the top, doesnt make sense going over what youve already put on

[@tezf9161]

Is this in slow motion? Should be titled.. slowest 20 quid ever!

[@anthonycodydylanandanthony803]

i think im gona make a 45 second video with the same size wall maybe a bit bigger and i wont get most of it on my jumper

[@chinz4010]

Still waiting

[@mranonymous8725]

Still waiting

[@adrianfaticoni5479]

Still waiting

[@CompetitiveEllisy]

Still waiting

[@dcp6513]

Still waiting ...

[@jamuddin316]

1 hit wonder but then again if the customers happy then who gives a fuck it's all about the mony at the end if the day!!

[@jarlathgeraghty6572]

Itz Riley ya and you wont make any money if u go that fucking slow 😨

[@hasbullahtheg.o.a.t9415]

after two half mins wall should be done ok job but to slow if u don't hurry up ur ceiling will set lol

[@roffa0108]

Pro

[@englishdave9986]

Nice action

[@peakyparttimers9362]

It's not 3 mins its 5 mins 29 secs?

[@scosy07]

Didn't think that was too bad if I'm.honest, sure he could of gone faster if need be, why swear your bollocks off if you domt have too...

[@sukyjeer8996]

That was very slow!!

[@antonyenglish141]

look give the guy a break , plastering life ain't all that who cares it ain't worth caring /macho shit

[@BD-sv8dj]

I hope you wasn’t on price 😂

[@timmo5443]

You woiuld of done it in 2 minutes if you move the Mud bucket closer to you.

[@stevengordon2145]

He can get 2 walls at 3x3 per hit going at that speed. Not terrible if on domestic work I guess. On site you would struggle to make a wage at that speed. You will lose money If your not hitting 45-50m a day on site time to go it's savage meter rates are brutal. Way too much leaning over for me don't use his knees enough..but he's young he will get there. Seen worse..best of luck to him.

[@xxdeedee]

That was hard to watch 😆

[@mikeymikes75]

not sure about 3 mins tho, however not bad

[@carful_stable9]

Shit 😂

[@kristophertebbutt3695]

i think the paint would dry quicker

[@kristophertebbutt3695]

should get 3 goes out of a hawk use the full length of the trowel overlap an inch .....up down up !! up down up!! up down up!!.... next hawk simple keep the trowel straight aswell make every move count none of this circular shite

[@jimmywatts8219]

Not bad bruv but are you really wearing gloves?? Lol

[@garydouglass9577]

I would of had all 4 walls on time it took you to do that. Not with my hat and coat on like 🤔🤔🤔

[@mhuntwales206]

Lol

[@karlgordon2980]

Haha jus saw all your hater comments haha jus goes to show people get so jealous. Can't believe people have time to vent so much hate when someone's good at what they do.. Also if you didn't notice numb nuts that I had already put the ceiling up before the wall ha. Anyway I'll put £1000 up against anyone who thinks they can do a better job than me (plaster off haha and we can video it for everyone to see). Anyway lads back to work as I'm sure some on you are not in work cos you have so much time on your hands to chat rubbish on here :)))

[@paulmorgan2629]

why dont you start at top lay then half way down to end of wall then floor to middle to end of wall quicker less stretching faster method good job that wall wasnt bigger you would have lost it hope you done ur opposite and one gauger full on hawk get a grip you walk more than laying on and gloves wtf is that about feel the grip ur not a spread mate soorry to say plus ur slow jobber

[@RealTimeZone]

The comments section of every plastering video on KZbin is filled with these experts who can double coat a wall in 45 seconds. You never see them on video though, funny that.

[@keepitreal897]

Karl Gordon fuck the haters

[@RealTimeZone]

***** I agree, every plasterer develops their own technique. I've never seen two the same. There's no right and wrong way to put plaster on a wall or take it off a hawk, so long as the end result is good.

[@norocketsciencebuild5371]

Bro, I got hate on my channel too, and, I ain't even a plasterer. Ignore the jealous folks! Keep doing what you are doing!

[@chadurushev6877]

lol

[@steveplayford1587]

Shit all that and it only scratch coat

[@jessemelucci2188]

Didn't hit ur seams first.

[@andrewparsons4373]

Get your gloves off and get your gear on a crate

[@jarlathgeraghty6572]

yo karl only seen ur vid now. u might have speeded up since 2015, but id have the wall done while u were going to ur bucket to get more skim. my son is nearly 4 and he nearly has the gest, hopefully he will have a better drive then u, even with the tunes on. sorry dude.

[@Lemon-squeezer]

Put a video up of how fast you can skim a room out then fucking Billy bullshiter

[@anthonycodydylanandanthony803]

theres no way he put that ceiling on aswell beacause the pace he plasters it would go off on him ...i could put that whole room on in 1 set

[@strontiumdog8646]

sabrina bryan Maybe you could, but it would be shit quality.

[@anthonycodydylanandanthony803]

no it wouldnt mate it would be spot on

[@anthonycodydylanandanthony803]

trust me mate im not a hater but i havent met anyone as quick as me and the quality woud be good

[@strontiumdog8646]

I'm faster than you.. no I'm faster than you... no I'm faster than you WAH WAH WAH Who gives a fucking shit! Hahaha get a life

[@anthonycodydylanandanthony803]

but iam faster thats the problem

[@masterplasterer5910]

Painful to watch mate hope you don't work on price

[@israeladesanya4596]

Cock

[@martinnottsperfectcoins1930]

To slow

[@MrHeaton999]

Slow as fuck

[@myatheunicorn5384]

Far too slow fs

[@driftadt]

lol