Enclosed Trailer Fender Replacement

After being involved in a small accident we needed to replace our trailer fenders. In this video we will show you how we did our new trailer fender install. This replacement part isn't identical to the original smooth trailer fender. If you have any tips on how to replace a trailer fender please share them below.
Thanks for watching! Please like, comment and subscribe.
Video Produced by Thrifty Garage (Please Subscribe!)
/ thriftygarage
Find us on Facebook (Share!)
/ thrifty-garage-1571631...
Connect on Instagram (DM me!)
/ thrifty_garage
As Always, Thanks for Watching!
- TG (Thrifty Garage)
Business Inquiries:
2401 E. 32nd Street, 10-248
Joplin, MO 64804-3177
[e-mail]
#TG #ThriftyGarage
Enclosed Trailer Fender Replacement 70
Trailer Fender Replacement 69
TG,ThriftyGarage,Enclosed Trailer Fender Replacement,trailer fenders,rv supplies,tandem axle,tandem axle trailer,tandem axle fender,trailer fender,no step,15 inch wheels,how to replace a trailer fender,damaged fender,wrecked fender,wrecked trailer fender,damaged trailer fender,trailer tire,cargo trailer,enclosed trailer,7x14 enclosed trailer,trailer fender install,enclosed trailer fender install,cargo trailer fender install,smooth trailer fender,smooth fender,replace fenders

[@danrich9794]

They yielded into my lane epic

[@enemyofthestate9358]

On the popping off issue put a toothpick into the holes then put your screw in/ chalk the seams

[@paedahe4975]

You got off easy. At least it’s mainly the fender. No biggie. Swap that baby out and your good to go. I did the same thing and added new led lights then siliconed them on, but reversed the polarity and the fender lights won’t turn on and I have to scrape off the rv silicone which is hard to get off.

[@ThriftyGarage]

You’re right, it could have been much worse.

[@taxidermist48836]

They are actually square drive. Not torx.

[@bmorecareful1014]

Thanks you really helped me

[@ThriftyGarage]

I’m glad!

[@dwightblackburn546]

My Spartan cargo trailer is doing the same buckling and I got the same dent just in front of the right fender and my buckles got so bad under the finder the side buckles were rubbing the wheels. I took off the side trim and some fo the screws in the panels and some buckles came out. But had to drill new holes for the screws as they didn't match the holes when the buckles came out. There is a design flaw there some where in the bottom extension that holds the bottom of the side panels. Mine are do bad I am considering putting diamond plate 2 foot up from the bottom to cover all the buckling. What a mess on a 2 year old trailer that's never been overloaded. Discussed

[@ThriftyGarage]

That really is unfortunate, especially on a new trailer. Our trailer is 5 years old now and it is definitely showing its age.

[@dwightblackburn546]

I have discovered the reason for the pucker in the side panels on my Spartan cargo trailer. I got under the trailer and found that the spring U bolts had contacted the bottom of the frame. Leaving a dent in the bottom of the frame. That shoved the side of the trailer up causing the puckers in the siding. I remember letting the right wheels drift off a narrow road recently and felt a bump and the trailer bounced. I am sure that did it.

[@sheldonnorton9035]

Thanks for the video. My original has sealant all along the seam. Do I really need that? I see your’s doesn’t.

[@ThriftyGarage]

I decided against it. I think it’s more of a fit and finish item than actually being functional. Personally I think it looks better without.

[@sheldonnorton9035]

@@ThriftyGarage Thabjs!

[@imnew2nm324]

@@sheldonnorton9035 The trailer he has seems of very low quality, I might not judge your trailer by his.

[@manstuff612]

Those are square bits not torx i learned the hard way

[@ThriftyGarage]

Yeah, I've never found the right bit for them...

[@thomasjames8246]

Jesus 🤦🏻‍♂️ get a extension 😂

[@ThriftyGarage]

That would require a trip back to the tool box…