Very helpful tutorial on fixing throttle position sensor faults. Your expertise is much appreciated!👍
@human96472 жыл бұрын
Interesting at napaka informative. Salamat sa mga ganitong vlog. Maraming natutunan
@angelicacostiniano31172 жыл бұрын
Thank you for sharing this good content para sa IBANG walang alam.paano Gawin hehe,
@catherine72192 жыл бұрын
Tinapos ko talaga panoorin dagdag kaalaman thanks for sharing this information
@ultimongtao. Жыл бұрын
Very helpful po..maraming salamat..for how many weeks kung pinoblema Yung Toyota Revo ko,Ngayon solve na.
@jasmindiscipulo8598 ай бұрын
Ano Po naging sakit Po Ng Toyota Revo nio po
@jimviktorlangstrom76622 жыл бұрын
A small component that can make big troubles. Thank you. Never thought about it.
@ArLenYoung2 жыл бұрын
Good day kabayan. Watching from Tasmania sending my full support. Thank you for sharing. Godblesd
@lheannesiaton65692 жыл бұрын
Napakagandang content ,thank you for aharing
@kittiepie10782 жыл бұрын
Thank your for your tutorial its really gonna be a big help to many out there in the same field
@malaica_272 жыл бұрын
Great info. Thanks for sharing. Happy new year. Tapos na po lahat.
@keziahshain59012 жыл бұрын
Very informative lalo sa mga may sasakyan salamat SA pag share
@beeline68222 жыл бұрын
Thank you for this video tutorial. I learned a lot from it
@simplymacis2 жыл бұрын
Very interesting video. It’s informative and useful. Thanks for sharing.
@zarahkathivanvlogs83922 жыл бұрын
Another useful vlog from you.thanks for non stop sharing of your knowledge
@sansastark17822 жыл бұрын
Imtresting..I have learned something new again from you
@gtvchannel19442 жыл бұрын
Salamat sa pag share ng kaalaman idol,more videos po.
@darlingheart77242 жыл бұрын
The most helful this video lods keep it up at more videos pa
@strawberrybag43322 жыл бұрын
Thank you idol dami ko natutunan nanaman.
@evaavorque74812 жыл бұрын
This is very helpful keep uploading videos
@chebbsdela2222 жыл бұрын
Very helpful n interesting vlog. It helps a lot
@suilaultra97882 жыл бұрын
Thank you for sharing. This kind of vlog is interesting to watch
@genna12892 жыл бұрын
Nice information, thanks alot and can't wait to see your next video
@gamingklondike68482 жыл бұрын
Nice content loads very impormative
@everydayvibez53962 жыл бұрын
Thanks for sharing this tips,really uaeful to me
@mikmikkai51652 жыл бұрын
Very informative video....keep it up
@flowergarden47162 жыл бұрын
Another interesting and informative content
@nayanthara19772 жыл бұрын
interesting video, i learned a lot
@AlexLaurenHBada2 жыл бұрын
Nice content bro it's very useful thanks for sharing us
@mehub63602 жыл бұрын
Thanks for this very informative content
@otsootso99352 жыл бұрын
nice content waiting.your next video
@amosobogas91132 жыл бұрын
Thank you for the video, pls my Honda Accord 07 is consuming too much fuel lately and at times goes high and low on it's own. Some mechanic are saying no catalyst that's why. What should I do?
@andammixed2 жыл бұрын
Removing catalyst is not a caused of large fuel consumption, what can i suggest for now is, try to used DTC scanner, to check the injector flow, the map sensor, and other sensor related to the engine performance or to the fuel system,, My Suggestion,: change air cleaner, clean throtle body, clean air intake and exhaust manifold ( so that the engine can breath) intake manifold gasket replace, Clean the VTI strainer, flush the exhaust pipe from the engine, choose light tires, my suggestion make your car low fuel consumption and engine operates in normal condition,.
@vincentlucip46292 жыл бұрын
buti nagawi ako sa channel mo bro may na kalap na namn ako
@aiai85882 жыл бұрын
Salamat sa pag bahagi kuya.
@auroraaurora8762 жыл бұрын
That's a nice one bro.
@frankheart56312 жыл бұрын
good information you share some idea to others, keep it up!
@angelabartido8232 жыл бұрын
Not easy to understand since i am not in this line of work but I am willing to learn too
@olatunjidavidolalekan60832 жыл бұрын
This is really helpful but my car is a Peugeot 406 (Prestige) and it has this same problem. How can I fix it please.
@andammixed2 жыл бұрын
What is the isue of your car, may be i can give some tips
@fgjs9042 жыл бұрын
Sir what about iac valve can it too cause misfiring or the misfire comes from the tps only and fuel consumption
@pinayhk87702 жыл бұрын
new freind here sending you.my full support
@lovelyrenante63212 жыл бұрын
This content is very helpful.
@kathyangvlog22912 жыл бұрын
Salamat sa Pg share po
@bobbybonnarens36638 ай бұрын
Will a bad tps cause it not to start at all?
@andammixed8 ай бұрын
No it should start even has damagae
@INTERNA92 жыл бұрын
THANX
@triziasmith11242 жыл бұрын
I need to understand more about this
@jasmindiscipulo8598 ай бұрын
What if the tps sensor is not moving normal can we clean using electronic cleaner or anything? My car stock in 2 weeks. if i start d engine the engine stop
@andammixed8 ай бұрын
Yep you can clean it
@sapphirepilot2 жыл бұрын
A faulty TPS caused my ssangyong with merc engine not want to go into 4th gear or not stay in 4th gear. Error message suggested TPS fault. Replaced TPS solved problem. Easy.
@strattuner Жыл бұрын
put a new one on every 65k miles,they are a part that wears internally,along with this sensor replace the o2 sensors every 85 k mi too,along with oil changes and new air clearner elements ,you will run and run and get programmed fuel economy,mine just changed,i practice what i preach,retired ase tech of 47 years,yes parts wear out,its the way of it,no time for breakdowns
@tagapangasiwanimara88902 жыл бұрын
Thanks for sharing po sir
@larrythomas3624 Жыл бұрын
My 1993 F 150 started idling way to high ( no tach but probably 1400RPM ). I unplugged the TPS and the idle went to normal. I drove it around the block with it unhooked and it actually drove ok with it disconnected (?!). I take it that I need to replace the TPS but it seems crazy that it idles and accelerates pretty decent with it not hooked up.
@andammixed Жыл бұрын
Try to do basic PMS sir clean all air filters, the intake manifold, check the gasket if damages and hoses or any vacuum leak,, this are one cause of high idle or unstable idle
@larrythomas3624 Жыл бұрын
@@andammixed Thanks, but if it was any of that would the idle instantly go to normal when the TPS is unplugged?
@nishankavi9922 жыл бұрын
what is the vehicles in ur video??
@andammixed2 жыл бұрын
Nissan pick up gasoline engine 2015 model
@thesetruths14042 жыл бұрын
Hi. I've got a 2003 Montero Limited 3.8L. Twice so far (1,000 miles apart) mine has gone into a condition where it will not accelerate. It idles and starts fine, but will not go over 40mph on level road, and takes a long time to get to that speed (severel minutes). It will be fine one moment and then begin this malfunction in the middle of driving it, in town or on interstate. I do have a TPS sensor code (P2135) but also cam and crankshaft sensors codes. The timing system is fine and it doesn't jerk or do anything strange except refuse to accelerate. I can turn it off and after 20 minutes it will operate fine again. Is the the TPS sensor getting hot and then it fails?
@andammixed2 жыл бұрын
In this case, try to get back to basic, change all fuel filter and clean air filter,clean airflows sensor, if the TPS signal always mulfunction beter change the TPS,,and if your car is automatic transmission chage the fluid and change the fluid filter and clean the strainer and fill with design AT fluid on your Transmision.😊
@Devo19872 жыл бұрын
did you get it fixed ? what was it ?
@jessieesio942616 күн бұрын
Nice
@benjamir474Ай бұрын
My fzs v2 has automatic acceleration problem ....new cables but still problem ,what the solution?
@andammixedАй бұрын
@@benjamir474 air leak on your intake manifold ,check vacum hoses or any hose connected into your intake manifold , because those are one reason acceleration goes up even acc pedal at rest,,
@benjamir474Ай бұрын
@@andammixed I'll look into it
@Emil19972 жыл бұрын
Hello can u help. I got bmw e46 320d automatic transmition: when accelerating or when holding steady gas for example driving with 80kmh rpms jump up or bounce down. When restarting the transmition parameters i get 300-400km of normal driving with no problems and then the same starts occurring. Please help
@andammixed2 жыл бұрын
I think first you need a diagnostic scanner to check for any abnormal system, but if you want to try any basic, try to clean your throtlebody, fuelfilter change check also fuel strainer and aircleaner this are the basic which need to clean if it thesame better used a DTC SCANNER
@Emil19972 жыл бұрын
@@andammixed tried changing the fuelfilter and air filter also pluging in on scanners car shows no codes, on dashboard no check engine or transmition problem light. Every mechanic is suggesting to change the torque converter bcz they say its damaged ( car also makes grinding noise for 2-3 secounds when cold acceleration 40kmh) and transmition oil and filter change. Im just amazed how can the reseting the transmition perimetars stop the problem for 300-400km if it is mechanical problem…
@imaansarwar23142 жыл бұрын
according to obd2 what should be the ideal range of throttle position
@metzmatu8409 Жыл бұрын
0.5 - 4.5 V
@harryviking6347 Жыл бұрын
When I drop the accelerator, the engine is hanging a few seconds before rpm is dropping. TPS problem? Other than that the engine is running fine.No warning lights.
@andammixed Жыл бұрын
Try first to clean the throtle body and check all the vacum hose if its the same theres a posible that your TPS is in trouble,
@harryviking6347 Жыл бұрын
@@andammixed Wow! That was a fast response! Thanks! Will go ahead and do that! 😁😁
@whlawson5812 Жыл бұрын
@@andammixed I have a plug & display OBD2 on the car dashboard. At 750rpm MAF at 4.7g/second, throttle valve body 17.2% open, MAP at 7.35psi. After cleaning the throttle valve body throttle valve body at 14.9% open. No change in MAF and MAP. Car is 1.8 litre. At 750rpm this 1.8litre has a calculated air intake flow of 1.8 x 750/2/60x relative air density = 5.7g/second. But the intake valves for most engines only are closed at about 50 to 60 crankshaft degrees after BDC so this air flow readings of 4.7g/second is my reference of a good air flow by MAF for this engine at 750rpm. So for any old car it is good to have an OBD2 kept on dashboard. Record obd2 display using handphone and review it later. Many other parameters can be recorded like SFTL, LTFL, O2 sensor, rpm, speed, iat, etc etc. These values or reading are interrelated.
@kadeemconnor89232 жыл бұрын
My blue bird sylphy rpm going up when I driving I change speed sensor already
@andammixed2 жыл бұрын
Please check for air leak, throtle body, intake manifold and check all hose's, damage hose or suction air leak can cause unstable rpm during engine operation
@jimmartin94402 жыл бұрын
The computer announcer is annoying, just like, Joe Biden!