Throttle Quadrant for A2A Comanche 250 & General Aviation Aircraft | Self Build Kit | Tested in MSFS

Authentikit release their first complete kit, a vernier style throttle quadrant designed for GA aircraft, and modelled on the Comanche 250 from A2A Simulations.
If interested postage costs are estimated below (SKS to confirm).
UK: £4.99
EU (Germany): £7.99
USA: £9.99
Referenced Links
Authentikit PA24 details: authentikit.org/pa-24-comanch...
Authentikit PA24 (includes assembly video): download.authentikit.org/file...
SKS (PA24 Kit): www.simkitsupplies.com/produc...
A2A Comanche 250: Available in MSFS via the Marketplace
Simhanger First Look Video: • New Throttle Quadrant ...
Support the channel so I can continue to bring quality content to you:
✈ You can donate here: www.paypal.com/paypalme/simha...
✈ You could also buy me a coffee here : www.buymeacoffee.com/SIMHANGER
SIMHANGER KZbin Channel Link: / simhangerflightsimulation
Join Simhanger on Discord: YOUR DISCORD INVITE: / discord
For more details visit Simhanger Website: www.simhanger.com
Connect with me on Facebook, Instagram and Twitter: @Simhanger1
Looking for help with MSFS, then check out my HOW TO GUIDES, link to playlist here: • MSFS HOW TO GUIDE
MSFS on Xbox playlist can be found here: • MSFS on XBOX
✈ Get the best head tracker - Tobii Eye Tracker - 5% Discount Link (affliated): tobii.gg/simhanger use code simhanger (exactly as shown) to get your discount.
✈️ VR Pilots, need prescription lenses? Link to VR WAVE : bit.ly/SimHanger-VRWAVE ? Get 5% discount by entering in promo code simhanger (all lowercase) at checkout, (non-affiliated).
Thanks for watching
#microsoftflightsimulator #msfs #flightsimulation #vr #authentikit

[@SimHangerFS]

Dimensions are as follows (mm) 220 x 98 x 53. (Excludes side mounting brackets).

[@AuthentiKit]

I just measured the width including the side brackets and C-clamps and get 25.5cm

[@SimHangerFS]

@@AuthentiKit okay my measurements are just of the main body, excluding side clamps.

[@matp8493]

I've just received and built this, its really great. It takes the Comanche up a level in VR. Thanks for the heads up!

[@JenniferinIllinois]

Phil finally did it and developed a GA setup. I told him that it's going to be difficult to not go down the AuthentiKit road now. 😉

[@manic_miner]

Ordered the full kit, just what I have been looking for Mark. Thank you :)

[@SimHangerFS]

Hope you enjoy it!

[@b6s4shelter]

It looks great Phil! Beautiful work. I built an entire spitfire cockpit from Authentikit, never having 3D print experience and its been magical in VR. Place them in perfect space and the immersion is unparalleled.

[@AuthentiKit]

My vision realised! Many thanks for sharing. Hope you've got space for the engine start add on I've got in prototype on my desk - fuel cock, magnetos, start/boost, primer and fuel pump

[@b6s4shelter]

@@AuthentiKit I will, as I'm in the middle of building a 6DOF Stewart platform. Learning to weld right now

[@AuthentiKit]

That’s a great overview Mark. I really appreciate your support. Your lighting rig is fantastic too - puts mine in the shade😉

[@mikekaduce]

width of entire unit when mounted? @desktopaviator977 responded to me, but it sounds as though he might be referring to the extended length of the levers.

[@AuthentiKit]

@@mikekaduce Full width including C clamps is 25.5cm

[@menacegtr]

Thanks for putting this video up. I went straight to the seller but was sold out. I sent a message today to ask if or when he would re stock, i got an email an hour or so latter saying he had 5 more just come in and not to wait. I put my order in with just 3 left. I have watched the instal video and was very impressed with the way its built and put together. Can't wait to receive mine. Thanks again as i would never have found out about this brilliant throttle quadrant.

[@artswri]

Seems like a nice kit. Thanks for showing it

[@get_outdoors]

Really impressed with this, just started printing this today

[@SimHangerFS]

Let me know what you think. I am honestly impressed.

[@manic_miner]

Confessions - This is LEGO for grown-ups (or Meccano) and it's brilliant! What a time to be alive :)

[@SimHangerFS]

😂

[@mikecoffee100]

ok just send it via post no need for a bow lol and another good informative video Thank You

[@BALLOOROOM]

7:45 those ferrules are tiny, what tool did you use to crimp them? I hope this is a great success, the biggest hurdle for me was Authentikit didn't include the 3D printed parts in their kits.

[@SimHangerFS]

I just used a small flat end screwdriver, just a push down and they crimp onto the wire.

[@mikekaduce]

it would be a huge help if I could bother you to perhaps take a lateral measurement of the size of this unit, left to right, when mounted?

[@desktopaviator977]

If i'm correct the unit is 22x10x5cm

[@desktopaviator977]

The levers are between 12-10cm long.

[@SimHangerFS]

Dimensions are as follows (mm) 220 x 98 x 53. Left to right is 220mm

[@franzbri]

How to assign the brake to make it on/off? (MSFS A2A Commance)

[@SimHangerFS]

It is shown and explained in the video. Check after 10:00 timestamp

[@franzbri]

@@SimHangerFSthx sry for being lazy thought I’ve already tried that works now

[@SteveBOZZY]

I really wish you could buy this already assembled 😢

[@SimHangerFS]

Give it a go...😀

[@SteveBOZZY]

Is it the same size as the actual controls in the real aircraft do you know ? Thanks 👍

[@SimHangerFS]

@@SteveBOZZY I believe so according to Authentikit.

[@darthmelbius]

So not really vernier enabled? Not sure why you are saying vernier style. It's misleading.

[@SimHangerFS]

I disagree, it is styled on the typical TQ that uses a vernier based mechanism, there is nothing misleading in my personal opinion, (and never intended), as I show the complete open assembly within the video.

[@firefox3187]

Could this be made to work with Xbox ? Either home brew or by SMS/Aurthentikit

[@SimHangerFS]

I don’t think that is possible unfortunately.

[@AuthentiKit]

I looked into this for ages, hoping to find some kind of adapter, but found nothing that did the job.

[@SimHangerFS]

@@AuthentiKit Xbox compatibility requires the inclusion of a '' chip'' and subject to MS approval.