ThrotX 🚀 Thumb throttle adapter for Almost any Escoot ⚡ Easy to Mount & Use 🍻How to Install it 🏴‍☠️

[@MericaDude]

Hey Pirate, just want to update you and let you know that I installed this on my Ti30. It works great and my wrist no longer hurts from the original position I had to use the finger throttle in. A+ on the texture of the throttle as well. 🤙

[@PirateWasHere]

Thank you for your opinion 🍕🍻

[@JustNel]

Tried it this morning on my Vsett10 and it's amazing! No delay.. no need for soldering. GREAT JOB!

[@PirateWasHere]

Thank you for your info, I will update my description 🍻🍕

[@JustNel]

@@PirateWasHere hey Pirate I've had people ask me about the throtX and they were wondering if you sell the file to be able to print. Also the i changed handle bars and went to put the throtX and when I went to tighten the screw, the soft plastic cracked a little. I put glue to hold in place and it's fine. Maybe a stronger plastic?

[@PirateWasHere]

@@JustNel I used nylon like filament so I guess it could be hard to find something stronger and achieve low price. You re 2nd person who told me about it , 1st one tioghten the screw super hard and it just broke. I do not sell files cuz its highly possible than sooner or later files will be all over internet :)

[@JustNel]

@@PirateWasHere i completely understand. I figured i ask since so many were wondering. I'll keep putting glue where the crack is, it has not shifted or moved so it still works.

[@PirateWasHere]

Bro pm , U got my full after sale support.

[@smilerite7321]

I fitted my one yesterday. Owe yes its fantastic. Changed my ride completely. Thank you Pirate. Best idea ever man : )

[@PirateWasHere]

Thank you 🍻🍕

[@CRAIG5835]

Just going over your vids and I see you have an E shop. Ima have to go somewhere at the moment but have pulled up your shop pge, ima too scared to look at it now or I will not make my appointment i will be checking out the site so much. I already want the Bling you show here, great idea man. Ima think that your site will have lotsa things i will want to purchase. Ive got an X3 Obarta which is sold in New Zealand under the Mankeel or the Falcon name. I looked at their site in China and learned that they will put any name you want on their scoots if you buy a few. I LOVE this, my first scoot. Its a powerful beastie (It seems grunty to me, this being my first scoot and the first one ive rode with Dual motors.) Im old now, 65 so cos you dont mend too well at my age I dont ride as hard as i would have if i was in my 20's or 30's. I like to do everything in life according to your current situation and my current situation is that im an olde bugger nowdays. Be seeing you next vid, i like your style.

[@mhj050178]

i ordered mine 24 seconds into the video. great idea and product Pirate! thanks

[@PirateWasHere]

Thank you for supporting my idea 🍻🍕

[@mickael4813]

Est-ce que ça fonctionnerais si la gâchette n'a pas le retour ? Mon frère a casser la pièce métallique qui sert à avoir le retour de la gâchette et ce système pourrait lui être utile....si ça fonctionne sans que la gâchette ait de retour

[@supacar5]

Hey man, I’ve got a Nanrobot D4 and was curious what the handlebar grips (the carbon looking and blue) are and where i can get those?

[@haraldthuringer4103]

Hi Pirate, when will the ThrotX Thumb Throttle adapter be available again. Your e-shop wrote the following: This product is currently out of stock and unavailable

[@LukasK85]

Bardzo pomysłowe. Jedna mała sugestia czy nie lepiej czerwone cięgno dac w lustrzanym odbiciu ? wówczas mamy je bardziej w linii prostej i więcej mi miejsca na rączkę ? Dodatkowo nie ma wtedy tak dużo wolnej przestrzeni między mocowaniem wyświetlacza a Twoja przepustnicą.

[@PirateWasHere]

Jak dasz w lustrzanym to bedzie mniej miejsca na raczke ;) , troche nad tym i innymi takimi kminilrm hihi . Thx za sugestie 🍻🍕

[@LukasK85]

@@PirateWasHere chciałem dodać link do zdjęcia o co mi dokładnie chodzi ale yt z automatu kasuje :/

[@MericaDude]

I ordered this :D Very good idea man! I also bought your charger port replacements. My first soldering job is in the future ;)

[@zizusaid]

Good job Pirate, keep on going, love your work.

[@flow4127]

Hey Pirate mine works perfectly so far. You even throw in a extra one. Very smart idea. Thanks

[@PirateWasHere]

Thank you 🍻🍕

[@jimmysausager]

Do you know if this fits Langfeite l8s?

[@karbis.]

It works perfectly for es19, it's very precise

[@PirateWasHere]

Thanks for sharing your experience 🚀🍕

[@jamessong5838]

Just ordered mine~ Can't wait to install it! So exciting~~

[@PirateWasHere]

Thanks for the support 🍻🍕

[@futho4188]

That's dope!!! I want one for my Laotie Ti30!

[@PirateWasHere]

@@futho4188 thanks🏴‍☠️

[@juanignacionavarrobarria2903]

Hello! Excellent idea! Do you only sell the product through your Eshop? I have a Vsett 10+ I see some links from Ali and Bangood that do not lead me to anything. Greetings from Chile!

[@PirateWasHere]

Yes it's here pirate.ac/shop/product/throtx

[@Barowiec]

Takie pytanko nie na temat: zastanawiam się czy kupić ES19 albo TI30, ale niepokoi mnie wymiana opon. W Krakowie żule rozbijają butelki na potęgę i średnio co miesiąc muszę wymieniać dętki. W ES18 lite, którą kupiłem, sam wiesz jak przyjemnie się wymienia opony. Czy coś takiego jest w es18 i es19? Bo w TI 30 wymiana opon musi być koszmarem, chyba że nie jest...

[@gyulaszucs9293]

Hello! Can you make a 3d printed trigger throttle mod for a thumb throttle? I will buy it!

[@bascio]

Incredible idea :O

[@PirateWasHere]

Thank you Thank you 🍕🍻

[@khristophercurrea3861]

I really want to buy but it out of stock when will you have more

[@PirateWasHere]

In next 2 weeks newer version will be avilable :)

[@nitrobitde2609]

Hey Pirate, I just ordered a "Laotie Ti30 Landbreaker" and I'm thinking of buying this adapter aswell. Great work!

[@PirateWasHere]

Thanks, I hope you will have great fun with it like I had 🍻🍕

[@DiyNuke]

I just bought both of them within an hour😂 time to have some fun

[@shadoworkz123]

Why not get a thumb throttle then parallel it to the existing throttle?

[@PirateWasHere]

There is always a reason ;)

[@shadoworkz123]

@@PirateWasHere yes so what is that reason to not just buy a thumb throttle and parallel it?

[@PirateWasHere]

because of voltage sum and analog signal receiver.

[@RickyEats]

He burn the motors last time 😂

[@PirateWasHere]

🤫🤣🤣😇

[@edgurash834]

I just ordered mine my friend. What an awesome idea. I live in the USA, about how long will it take to receive?

[@PirateWasHere]

About 2-3 weeks, Thanks 🍻🍕🚀

[@rxndzvi]

Did you receive?

[@edgurash834]

@@rxndzvi yes my friend. It works so wonderfully! I do appreciate you spending an extra red band as a back up. Although it all looks like it is built very sturdy and I most likely will not have any issues with it. Thanks again my friend, great build and design on your part.

[@Beckmen93]

What us us dollar amount for this item?

[@edgurash834]

@Ryan Becker it was about $25-$29 US. It works awesome, man! I bought 2 more after I already purchased the first. My neighbor and my son each wanted one for their scooters after trying mine. With this new throttle setup, you have so much more control when accelerating because you can now have all your fingers on the grip. You feel much safer at high speeds. The product is buit solid. It definitely doesn't feel cheaply made. There is nothing else out there like this design unless you were to buy an entire new throttle, and then you would have to do some soldering to make it work. I didn't feel skilled enough to do that, so this was the next best option. Also, this is a great option if your scooter is still under warranty. Oftentimes, these manufacturers won't replace anything within the first year if you make major mods to the scooter. This literally does nothing to alter the stock setup of your scooter. I have another stock thumb throttle scooter on my Wolf King Gt pro, but I would even say this one works so much more smother. His delivery was fast, too. I think it only took like 7 days or so to receive them. He is very helpful and in contact with you to make sure you received it. 5 star receive for sure! The only complaint I really had was the little screw that is used for clamping the throttle to the handlebars. It did not always hold after tightening. I followed his instructions not to tighten too much. But because of this, it is just too loose. This isn't a deal breaker for me because most everything you buy to clamp on to your handlebars is not always secure. Oftentimes, you have to buy rubber gaskets to help things hold. To solve this problem, all I did was take a little cut out from the wrist of those yellow rubber gloves used to clean bathrooms. I held it around the handlebars and slid the throttle over it. Now it is so secure that you really don't even need the screw to hold it in place. But it has to be a very thin rubber glove to be able to slide it over the throttle.

[@mashingan1]

Dziś zakupiłem od Ciebie owy wynalazek 😎 Nie mogę doczekać się aż go przetestuję. Spróbuję również użyć tej przejściówki w Vsett 8 🤗

[@PirateWasHere]

Bardzo dziękuje , daj znac jak dziala z Vsett 8 🍻🍕

[@karelgood8961]

can be used on minimotors?

[@PirateWasHere]

for 90% yes :)

[@karelgood8961]

@@PirateWasHere w czwartek zamówiłem u Was w imieniu Ondřej Vávra, to dam znać, czy jest ok :-) Naprawdę nie mogę się doczekać ;-)

[@PirateWasHere]

@@karelgood8961 daj znac dziekuje 🍕🍕🍻

[@TheLydras]

@@karelgood8961 any update?

[@MrRulululu]

Hello is the eshop still working? I ordered some motor cooler for laotie es18 and wanted to order this but no news from my previous message on the eshop after ordering as I ordered the wrong type!

[@PirateWasHere]

PM with order number , for last couple weeks there was no any message from users as you described.

[@MrRulululu]

@@PirateWasHere hello my order number is 3878, i ordered A type instead of C by mistake, i used the form on the website let me know if that is not the right path to contact you. and sorry i didnt find a way to PM you directly here

[@PirateWasHere]

@@MrRulululu email :) . Actually i did not receive any extra email from you and parcel was sent with A position

[@PirateWasHere]

@@MrRulululu i will try to stop the parcel if its still in post warhouse

[@MrRulululu]

​@@PirateWasHereyou mean via the email from the order right?

[@LioNite]

Hello, i have a question, can you help me pls ?

[@MaxDigitalpl]

Powiem szczerze jeden z najbardziej nieprawdopodobnych feature'ów do hulajnóg jakie widziałem. Chylę czoło, że na to wpadłeś jednocześnie to jest tak łebskie że o ku*wa. Niebawem zamawiam

[@PirateWasHere]

Bardzo dziekuje :) 🍻🍕

[@honzalouma9583]

Ordered 😃 Can't wait to get it and test it 👍🏻

[@PirateWasHere]

Thank you Thank you 🍕🍻

[@honzalouma9583]

@@PirateWasHere just arrived, already tested and..gosh its perfect!!!🙌🏻🙌🏻

[@PirateWasHere]

Are you really happy about it ? If yes please share ur comment in my Eshop 🍻🍕

[@honzalouma9583]

@@PirateWasHere I will! I also made a review on Czech electric scooter group which has around 9k members, so you better buy some material for printing many of those😄😅

[@PirateWasHere]

@@honzalouma9583 Thank you for support 🍻🍕🍻🍕

[@martinprochazka6324]

Works with dualtron please?

[@PirateWasHere]

Hi , please PM me pirate.ac/shop/support/

[@karelgood8961]

Ahoj martine, koupils to a funguje ti to na dualtronu?

[@martinprochazka6324]

Zatím nekoupil

[@karelgood8961]

@@martinprochazka6324 mam objednane, az dojde dam tiu vedet,,snad nezapomenu

[@martinprochazka6324]

@@karelgood8961 ok diky

[@MisterNicTV1]

Thanks soooo goooood!! Orderte already!

[@PirateWasHere]

Thanks for the support 🍻🍕

[@smokusmokk]

Hey Pirate! Obarter x5 for 7k or the laotie for 7800? :) Godzilla is tempting!

[@PirateWasHere]

Hard to say, X5 for loooooong range , ti30 for multi purpose & full throttle ;o)

[@T2daBikeGuy]

Pirate Just Subscribed Sorry I'm late to the party that is Awesome You can keep a better grip on the handle bar with that ThrotX 🚀 Adapter

[@shlasher007gg7]

i got it right in the post this morning😅👍 i also got a Ti30 thanks to you,keep it full throttle bro',super nice videos!

[@PirateWasHere]

Thank you Thank you 🍕🍻

[@shlasher007gg7]

@@PirateWasHere is it possible that you leave a link to that forum that you were talking about a while back,cuz i would really like to have somebody to ask some basic stuff like what do all the P settings do and other things?

[@PirateWasHere]

There U got FB Group facebook.com/groups/epowergroup

[@Jonska]

Can you link those grips what you have?

[@PirateWasHere]

do you mean this : pirate.ac/shop/product/throtx

[@supacar5]

@@PirateWasHere they mean the handlebar grips which look like carbon fiber- I’d also like a link for that

[@ivanhovorka1229]

Ako si to môžem objednať ? Ďakujem.

[@PirateWasHere]

Hi there, Links in description :)

[@ivanhovorka1229]

@@PirateWasHere Thank you very much.

[@PirateWasHere]

@@ivanhovorka1229 Much love 🍻🍕

[@lcprod]

Great I ordered 👍

[@PirateWasHere]

Thank you Thank you 🍕🍻

[@konwera999]

Witam. Chciałbym zamówić taki wynalazek.

[@PirateWasHere]

Hej , link do sklepu w deskrypcji

[@TheLydras]

are u selling stl files?

[@rxndzvi]

Hi can you let me know if you deliver in the uk please i need this

[@PirateWasHere]

yes :)

[@rxndzvi]

@@PirateWasHere thank you so much 🙂🙂

[@rxndzvi]

@@PirateWasHere hi mate how long does it take? It’s been more than a week and not here yet

[@PirateWasHere]

@@rxndzvi you are not in EU , so it could take 2--4 weeks usually 2-3

[@rxndzvi]

@@PirateWasHere im from the uk

[@ptidav]

Merci pirate au top 💪😉 brun david merci 😉

[@PirateWasHere]

what I did this time ? :)

[@ptidav]

@@PirateWasHere rien j'ai reçu ma pièce 😉💪

[@PirateWasHere]

@@ptidav Wohoo! I am super happy, I hope this time It will work for very long :)

[@user-cw3nb8rc9e]

Adam Słodowy :)

[@PirateWasHere]

Pamietasz takie rzeczy ? jestes wyjatkowo wyjatkowy 🚀🍻

[@rarestep]

cool

[@tileafrizerul3138]

Hi. You can sell me 3D files for throttle?

[@PirateWasHere]

nah bruh

[@ptidav]

J'ai la vis qui a lâché moi 🫣🥹

[@PirateWasHere]

Is there any problem with Throtex ?

[@ptidav]

@@PirateWasHere yes the saw that blocks the trigger is broken

[@ptidav]

@@PirateWasHere I no longer have the system retainer, the plastic part where the screw broke

[@PirateWasHere]

@@ptidav send to me email and pictures please, also if there will be any any issue just send Email to me, I am really willing to hel p🍻🍕

[@ptidav]

@@PirateWasHere j'ai répondu par mail brun 😉💪

[@TheTrojanMaker]

Soldering a thumb throttle on will still be a more responsive gas

[@PirateWasHere]

the same , let's say that i tested it ;)

[@TheTrojanMaker]

@@PirateWasHere what are the dimensions? I already ordered a Xiaomi thumb throttle to solder on myself, but if this is more narrow it is definitely worth to use your solution

[@PirateWasHere]

But xiaomi throttle will not fit on regular steering bar cuz it has this thing at the middle of mountig hole

[@TheTrojanMaker]

@@PirateWasHere I guess I don't have the Xiaomi one then 😅 I have the one you used in one of your videos. 130 or something. I think it is 1,5 or 2cm thick, your solution seams to be way thinner, I will probably also order this

[@PirateWasHere]

@@TheTrojanMaker 130 throttle for sure will be better but some soldering job has to be done 😇

[@TheLydras]

what a cleaver idea..

[@blodhunt]

40 dollar for that thing is kinda rip off

[@PirateWasHere]

I am not sure where u saw 40$

[@blodhunt]

@@PirateWasHere sorry i mean 31 dollar*

[@PirateWasHere]

@@blodhunt 7$ shipping ,tax is actually close to 45% , my time , materials and I have legit business . If its rip off then try aliexpress or maybe some kido who live with mom can do it for 5 dollans

[@blodhunt]

@@PirateWasHere okay, this is an odd question; is there any power limiter item you can buy for electric scooter? i bought Laotie es19, it accelerate to fast when in turbo

[@HaloKnightOfficial]

Hi Pirate, we are Halo Knight Electric Scooter manufacturer, may I have your email to talk something more detailed?