Thumb Throttle Mod for Escoots Boyueda Laotie ... 🚀Easy Cheap DIY 😍130X & Laotie Ti30

[@vk4nga]

Thanks for the video, just completed the installation. Works much better than the trigger.

[@wesleyb82]

Great channel bro. Good job

[@Retyus6]

Thank you. Just finished mod with yourt tutorial. Works very nice a and is more comfortable for me to use thumb instead index. But scooter still kick and only solution is replace controllers. I have to order Spintend Ubox V2

[@huntergun1446]

Nice tutorial. I do this today my ti30 and its working very nice. In the beginning there is little "deadzone" like u have in video. But its awesome mod.

[@PirateWasHere]

🍕🍻

[@gaelviallefont-uy9vk]

Bonjour, pourriez vous me dire si les contrôleurs sont ceux d'origine ? J'ai entendu dire que le signal était carré sur la Laotie ti30 et donc qu'il fallait remplacer les contrôleurs pour avoir une accélération "souple"

[@titogame5718]

Hello, Thank you for your videos you have great tips, I have a question about the Ti30, in dual mode if the battery and at 60v, is it accelerating a little too hard, then the scooter cuts out, is there a possibility to solve this cut-off problem? Thanks in advance.

[@geog26]

as a MTB user u can easily adjust to trigger throttle ,as thats the placed in mtbs where your rear brakes are placed which you use allot and you have the muscle memory of using your finger ,your thumb gripping the handlebar seems natural aswell in this position (imagine what happens if you need to slam the brakes fast and your finger pushes the accel lol )and your thumb doesent get tired by holding it like that , if you use trigger finger throttle, u cant mount it vertical lol ,u gotta mount it at the same or close angle to what you have the brakes mounted at ,most people use it close to vertically its ridicoulously unvomftable like that ofc ,and everybody knows you need to adjust your weight on bikes and escooters ,acelerate escooter you lean forwards brake lean backwards you dont jsut sit there like a fig if you drive it agresivly ,so saying that theres a risk that you acelerate to fasst and press the throttle is just crazy ,you can anticipate acelerating but you cannot anticipate braking in the same way lol /

[@the_vortex]

what about the acceleration resolucion? you can manage slow speeds or it goes immediately to 100% power?!

[@maxsinventions8913]

Nice video. If you haven't tried one already, get yourself a quality solder sucker pump! They are so fast, less heat needed.

[@phylaxxx]

The only issue with that specific type of throttle is water ingress can be a big issue. There is a different style of thumb throttle that is similar but isnt ambidextrous that is much better at resisting water ingress.

[@PirateWasHere]

but this stuff can be even used under water ;) , 5v is way too small to make short circuit over 1mm distance 🍕🍻

[@thepretiso]

Can you please show which one? Thanks.

[@phylaxxx]

@@PirateWasHere My previous throttle would beg to differ after being rained on. I needed to use PAS settings to control my speed until I took it apart and dried it out.

[@phylaxxx]

@@thepretiso Unfortunately I cant find any listings specifically for that throttle. Most throttles arent bad with water resistance, I was just giving a word of warning for that specific throttle.

[@liarus]

Thank you for this amazing video, this is exactly what i want to do on one lf my scooters which has this exact OEM throttle, seems like it's gonna be a blast to ride!

[@PirateWasHere]

hi, you can also try my ThrotX mod

[@LuisTeixeira]

@Pirate do you have any idea if there is any possible modification in the wiring (with the original Laotie Ti30 JIPIN controllers) that could allow selecting just front wheel drive (replacing the turbo/eco switches of course)?

[@fiansobg]

You can achieve that by swapping the controllers

[@HoRzeNTarI]

Hi Pirate! Great video. I wonder what soldering pen are you using? Im trying to find a cheap one on aliexpress.

[@MrDjrmx]

hi i just buyed laotie e19 and throttle is too jerky will this help or it wiill be all time jerky man if i dont use eco on start from 0kmh it just go firtst under me too mouch power on start do u have something to fix thiis to have throttle precise on start ? thanx

[@tamask8122]

Nice job. I need it... i turned the computer upside down to push the throttle

[@IM_BELOO]

It solved a little bit of that late gas?

[@domp610]

thank Mr Pirate, i search the default list for the laotie Ti30 , do you have it please ?

[@williamlelong2195]

Hello Pirate, do felt a lost power with this new throttle or not

[@jgc5782]

Thanx for the video brother..I replaced the battery for my scooter and the display is not reading that the battery is full....tested battery output..tested output from bms with different meters and it shows 58V but my display only shows 56V and capacity only shows 50%..Thank You.

[@PirateWasHere]

usually all those displays are not very precise :/

[@alireza071]

Hi Nice vid tar my scooter come with only on and off switch and key plus lcd display I like to add alarm to it I know positive and negative can connect to battery but alarm has other 3 wire do u know where to connect them to pls?

[@sothatgames1577]

Can i also add finger trotthle to my m365 but also keep my normal trotthle

[@Antony--DIY]

No my friend! Only from one throttle must take signal!!

[@sothatgames1577]

@@Antony--DIY but can i buy a finger trotthle and connect the connections on finger trotthle to the m365 trotthle connections

[@PirateWasHere]

yes ofcourse

[@don.s_a_l_v_a_t_o_r_e]

Hello! Super Scooter!👍One question and request: can you PLEASE help me and tell me where I can get these two pieces of rear right and left black swing arms. Where can I order this online? Can you buy these two rear black swing arms for the rear engine? As spare parts?? Please, can you help me? That would be very, very kind of you! 🙂 MfG.

[@shadowfalcons-airsoft7042]

Hay pirate nice video like everytime one question do i need to look at the voltage when i buy the Throttle? i found one on Amazon

[@mrbreeze7695]

Great tutorials, thank you! Do you recommend this upgrade or the use of your ThrotX? Both appear to be great solutions but wanted to know if the sensitivity of thumb throttle is improved over the stock throttle.

[@PirateWasHere]

Throttle sensitivity is a bit better on both, throtx you U can remove any time and use both thumb/point at the same time, hardware change is not easy to redo.

[@RickyEats]

Can we just cut the signal sensor in half and solder the throttle cables to the pins ? Instead of removing

[@PirateWasHere]

sure

[@cesar.pietro]

Hello. I want to buy my first Laotie. Can you give me your advice of what is the best overall Laotie for you? Thanks so much! Keep doing this great videos 🤟

[@scootersBoss]

Hey Pirate how many Magnets does the ES-19 Scoot motors have ..?? Each .. or tell what P setting number 2 ) is I need to know … asap

[@PirateWasHere]

No idea Bruh, ask on group please

[@DanielAzevedo94]

Thanks for the video. Awesome mod.

[@PirateWasHere]

Thank you 🍕🍻

[@carlosrodriguezperez5902]

do you still have any coupon for ti30? the one you told us in the review does not work for me

[@jordiluqueca]

Many Thanks for the video. Does it works with Speedway Mini IV pro LCD?

[@PirateWasHere]

if it looks almost the same like this one from video then should be ok :) . Cheers 🍻

[@jordiluqueca]

@@PirateWasHere Thanks!! :)

[@MericaDude]

Have you ever thought about changing to a different display or are you happy using a phone?

[@PirateWasHere]

in many cases also controller shoud be also repalced

[@MericaDude]

@@PirateWasHere ahhh that just adds more work 😂

[@quadrometer]

Good job, good video, now i think should be everythink clear how to install. Also i did it with your help bevore 😉🍻

[@PirateWasHere]

🍕🍻

[@vd1261]

Hello. I would like to do the opposite. Turn this display into a trothle. Possibly?

[@universaltoptechgroup1876]

Do you know if this would work on a damao mao1 throttle 72v

[@PirateWasHere]

possible

[@universaltoptechgroup1876]

@@PirateWasHere Thanks yup it those my boy and me figured it out 👍🏼

[@UserCraft1]

I have done the thumb throttle on my LT01 display. Can it cause worse performance? Like if I press all the way it only feels like 80 percent

[@PirateWasHere]

possible, you have to measure if new throttle, on full " throttle " got reading around 4.21V ( Black and signal wire ) > www.addicore.com/SS49E-Linear-Hall-Sensor-p/ad316.htm

[@UserCraft1]

@@PirateWasHere thanks very much. I will do that

[@medvador1516]

@@UserCraft1 hello friend have you found why you lack power when you made the change?

[@perunao4823]

heyy, nice video. I got a couple guestions before i buy my first chinese e scoot. Has the battery capacity dropped in long term use? Have you heard about the issue with Laotie es19 wobbling issue? And you should make some top speed videos.

[@KaeseSchimmel]

I have wobbling issues on my es 19. Will try to fix it this weekend.

[@perunao4823]

@@KaeseSchimmel have had any other issues? Is it a good choice to buy the es19?

[@PirateWasHere]

Es19 is very wobbly , I would go with Ti30

[@KaeseSchimmel]

@@perunao4823 I would not recommend to buy the es 19. It came with broken turn indicators wobbly wheels and the rear controller died after 100 meters. I just replaced the rear controller myself because the dealer send me the wrong one lol. Now I have huge wobble issues, almost fell at 40 mph because of that.

[@perunao4823]

Allright i think im going to just buy the ti30

[@Antony--DIY]

Why you don't conect to green wire straight...?? And just cut the one leg (green wire go)

[@PirateWasHere]

cuz it's my clean way :)

[@jkrsecret]

It doesn't kick!Thank you for sharing! Have you ever changed bearings in the motors?

[@PirateWasHere]

Not in those big ones but its quite easy , and spare bearings U can find in almost any shop.

[@jkrsecret]

@@PirateWasHere Yep.I'm thinking to change them with sealed ones and better quality.

[@tekgyver8206]

Hello friend i don't have 5 Volt i only has ground If i give direct 5volt and ground IT Not work

[@thepretiso]

Hi I have Boyueda and I can't use the throttle just a little bit like you. Even the slightest throttle move just spin the wheel to great speed, not precise slow control like you have. What to do? Is there anything in P-settings? I tried change pedal settings but it won't affect anything. Thx a lot!!!

[@thepretiso]

@@iavon6899 Will throttle from Laotie Ti30 work?

[@jiak3]

Hello i have the same problem...did you fix It? Thank you

[@thepretiso]

@@jiak3 There is no solution for it, except to change all electronics for Ti30 (square wave controllers and throttle) or to better sine wave one's without this throttle lag. It will spin rapidly only when the wheel is off the ground and it is normal when you are riding it. But there is still this little delay when you pull the throttle but in the end it is not that bad and I get used to it.

[@MrYangj04]

Will this work for ES19 models

[@PirateWasHere]

sure

[@alexajohansson5309]

I have to ask which one is the best of those two you linked? The Genuine 130X or the Cheapo 130? They both look very similar..... would love to know before I am buying one. Thanks in advance, cheers!

[@PirateWasHere]

Hi , looks/works almost the same but genuine one seems to have better plastic ( so over time it could be better deal ). Alexa are you really gonna install it ? :)

[@alexajohansson5309]

Hi, today I have a thumb throttle and I love it. I will get my SR10 tomorrow because its lighter than TI30. I am now wondering if I made a bad choice. The SR10 is probably to slow after a while. Anyways to your question Pirate, I dont have any tools to change the throttle but one of my colleague have tools and said he could borrow me tools or even help me with it. So this won´t be the last question I have to you :D

[@roycampbell3433]

Can you keep original throttle but just add the thumb throttle so you can just mix it up while your riding?

[@PirateWasHere]

Not really, check my other idea called ThrotX

[@roycampbell3433]

@@PirateWasHere Just subscribed, your system looks awesome, thanks for replying to my question about a dual throttle

[@Scripted27]

Can we buy this mod on your website soon?

[@jakub1755]

Hi which e-scooter is better laotie SR10 vs Ti30 in the field and overall which I should buy thank you (I have 75kg)

[@PirateWasHere]

Ti30 ! :)

[@jakub1755]

@@PirateWasHere I'll probably go to ES19 eventually, I just don't know how to buy off-road tires

[@PirateWasHere]

For me es19 is kind of bad scoot but as u wish ;)

[@jakub1755]

@@PirateWasHere which is bad on ES19 I want something good in the field I thought that ES19 with a kangaroo damper is top

[@gaelviallefont-uy9vk]

Bonjour Pirate. Est-ce que cela fonctionne avec les controleurs d'origine ?

[@PirateWasHere]

what do you mean ?

[@gaelviallefont-uy9vk]

L'accélération est-elle progressive avec les contrôleurs d'origine ? J'ai cru comprendre que les contrôleurs d'origine travaillait avec un "signal carré"

[@jose-emanuelgoossens3050]

Hello pirate do u know how to install a speed limiter on laotie ti30?

[@PirateWasHere]

Working on it, but looks like you will have to change controlles

[@jose-emanuelgoossens3050]

@@PirateWasHere I made a speed limiter

[@PirateWasHere]

@@jose-emanuelgoossens3050 i did some research and this is simple eco / turbo button

[@jose-emanuelgoossens3050]

@@PirateWasHere I did it i made just a second button that is hided

[@Jaimerga]

Why did you decide to put the trigger on it and not like the motorcycle?

[@PirateWasHere]

no seat

[@Bornmong]

Thanks again.

[@PirateWasHere]

🍕🍻

[@Rumpletiltskin05]

Doggo! 🐕😍😍😍

[@PirateWasHere]

🍕🍻

[@pandaemoniumplaza]

I don't quite get why do you think this one is better than trigger. Anyway... Do you know why thumb trottle has this dead zone in the beginning of movement? It does't work at all unless you push it 0.5-10mm forward. This is pretty annoying, since it is harder to controll starting speed.

[@PirateWasHere]

When u will ride scoot fast or for long time, and maybe some atv, u will understand (honestly 🍻🍕)

[@EscooterLife]

I only buy scooters with twist grip or thumb throttle, I come from a mountain bike background so mini motors throttle are just stupid for me

[@maucasarl3383]

Merci !

[@Mopar_logic]

Thanks

[@PirateWasHere]

🍕🍻

[@SyedShah-r9k]

Lcd display error please help me

[@PirateWasHere]

What do you mean ?

[@SyedShah-r9k]

@@PirateWasHere The display lcd display shows a red mark with a wire with a nail I don't know why if you can help me just to know what is the problem

[@SyedShah-r9k]

@@PirateWasHere I can send you photos but how if there is a whatsapp number or something else where I can send photos

[@PirateWasHere]

@@SyedShah-r9k it could be motor issue, or wirig problem between controller and motor

[@SyedShah-r9k]

@@PirateWasHere Speed regulator installation error

[@szymonhrapkowicz6158]

Muszę to zrobić!

[@titinono95]

HELLO. YOUR COUPON FOR BOYUEDA IS NOT GOOD. IT IS NOT VALID YET. PLEASE HAVE YOU GOT AN OTHER PLEASE ? Thanks a lot friend

[@1littlelee]

black is negative NOT ground!

[@PirateWasHere]

Thx

[@RickyEats]

Bro will mine smoke like that 😆

[@PirateWasHere]

🙃🤣🤣🤣🤣

[@RickyEats]

@@PirateWasHere 😝 😂

[@Polerface774]

EASY DIY 😍, 2min later proceeds to solder and unsolder.... Smh

[@olympA310]

Salut pirate mais tu es en Ukraine ou pas car c'est la guerre dans ton pays donc j'ai peur pour toi et pablo donc protégez vous bien

[@PirateWasHere]

je suis polonais merci

[@olympA310]

@@PirateWasHere OK merci et bien tant mieux car ta vidéo avec le drone fpv marquait que tu étais en Ukraine donc oufff je suis rassuré pour vous Amicalement

[@hatemale1609]

Are there any aftermarket scroll wheel throttles that run parallel underneath the bar? Like the Rion scooters.

[@-joo3033]

The Rion Curve...thats the only one as far as i know