Thrust Test Cheap Brushless Motor A2212 1400kv 3s Lipo 4 5 6 7 8 9 10 11 12 inches Propellers

This video about my experiment to find out how strong A2212 1400kv BLDC motor work in 3s (11.1volts) with 4x4.5 prop, 5x4.5 prop, 6x4.5 prop, 7x4.5 prop, 8x4.5 prop, 9x4.5 prop, 10x4.5 prop, 11x4.5 prop and 12x4.5 prop. The running test only about 10seconds for avoid damage to the BLDC motor due to mismatched propeller. The result may vary to your experiment for several reason. If you any suggest or comment please write on the comment column above.

[@challengedollar2880]

hey man thanks for this.

[@Hobbyandhabit]

you are welcome 🙏

[@challengedollar2880]

@@Hobbyandhabit may i ask if you have a 1000v comparison video as well. also do you have tri blade ones for 1000kv to 2200kv? liked and subbed !

[@Hobbyandhabit]

@@challengedollar2880 I haven't uploaded the 1000kv test yet. and while I only have 2 propeller blades

[@challengedollar2880]

got it, thanks. @@Hobbyandhabit

[@jv7ip]

Amazing you have helped me so much. Can you also tell me the value for 12x6 please? or if you can send me the model for 12x4.5 propeller. thank you

[@pedroavioes9896]

A hélice recomendada para este motor é a 8x6 8060

[@KalibasauRC_64]

Ok thank you

[@Hobbyandhabit]

you are welcome

[@teenarai3188]

Thanku sir ji

[@dishantbhure9597]

bro you cannot use more than 9 inch propeller on a 1400 kv motor for a long time the test parameters are correct but don't recommend these bigger propeller

[@SoriPop]

As long as you don't exceed the 180w max limit which I believe is for this motor then it's ok even for a longer duration. Ofc while providing cooling over the motor and ESC