Thrustmaster T16000m FCS Review (3 Years Later)

[@BluGames]

Thrustmaster T.16000M (Joystick & Throttle) | amzn.to/2VkCyko Thrustmaster T.16000M (Joystick Only) | amzn.to/3eJutxG Join this channel to get access to Blu Arrow Gold Member Perks, Bloopers, Deleted Scenes and Bonus Content! kzbin.info/door/DqnbZSTGXTQEU44KJp6rmAjoin

[@ShimitBlast]

Outstanding and detailed review. I wanted to see a "tested over time" review and you put me over the top. I bought the bundle that comes with the rudder pedals and I couldn't be happier. Thank you for the vid! Gratz on the A10 upgrade, already jealous.

[@BluGames]

Thanks sooo much glad i could help. And if you can afford it.. the a10 upgrade is MILES ahead of this. I needa post a review of it

[@whiskeyairsoft1729]

Jesus loves you

[@benjidowning2609]

You can adjust the tension on the throttle. If you pull the throttle all the way back, there is a screw that you can loosen or tighten to adjust the tension

[@mariuspanaitescu7352]

I just checked the manual.. there's a screw underneath to adjust the friction for the throttle. So RTFM :D

[@BluGames]

Thanks ill take a look

[@RamDuty]

@@BluGames So after three years you didn´t find ou that you can do it? Really?

[@BluGames]

Nope i expect my products to work as advertised...

[@RamDuty]

That makes no sense. Ur product is fine. It´s only up to u, if u want the throttle loose or tight. I just want to point out, that ur review is not valid, because u obviously don't know much about ur joystick...

[@BluGames]

Well thanks for watchin anyways. God bless ya

[@xx360pwnagexx3]

For more fine movements, I added a bit of curvature to the axis mapping. Now small adjustments are super easy. Also if you push the throttle all the way forward, there is an adjustment screw on the bottom

[@BrothersInArmsCoalition]

I figured there would be a screw, I’m watching the video as a good friend is sending me the T16000M Full Set so I wanted to watch a review, good to know there is an adjustment screw to fine tuning is possible.

[@hawxer585]

The rudder problem is probably a little rotary plasic thingy that has a crack in it. This plastic object is placed between a sensor which checks the axis. Had a logitech G27 steering wheel with the same issue. Replaced it with a brass one, which I found online, and it fixed the problem. :)

[@BluGames]

nice thanks alot

[@phun1901]

I just got a new T.16000M HOTAS and I appreciate this review. I am 99% sure that if you downloaded the TARGET software you could recalibrate the flappy paddles to have a new center point and dead zone.

[@Kervalen1]

Thank you for sharing your observations! Another trick with the throttle that the SR-71 “Blackbird” pilots used to do to with the throttle is to lightly wiggle the throttle handle to break the friction to allow very tiny adjustments to be made. Have fun!

[@BluGames]

Very nice

[@akiraic]

but that decreases the "solidity' of the entire piece in the long term. Because it is made of plastic, it becomes wiggly while handling it. after the second year using it I started using that methot and 1 year later I could clearly feel the difference.

[@newoperson2577]

For the throttle, you can actually change the toughness of the throttle to make it easier or harder to move it forward and back.

[@regwatson2017]

You need to grease the rails of the throttle to get the smooth action back. There's also a tension adjusting screw underneath which may or not be able to fix it a bit. The best grease to use is Nyogel 767A.

[@derknilch7233]

Hey man Can you help me? I bought a joystick for the first time And I don’t know how to get it working in War Thunder I don’t know what to do

[@brunogamesbr1]

for those who don't live in a country where nyogel doesn't cost the price of the throttle itself, you can use clear packing tape to cover every part that contacts the rails and use regular old silicone grease, smooth as butter and with a little bit of resistance as well, if your z axis stops working correctly you can also diy a hall effect mod with a specific sensor, a stack of round magnets and hot glue

[@ahlokecafe_articulate]

Can u also review your warthog hotas too?

[@BananaHace]

I took a can of compressed air and blew into the paddle for my throttle (I had the same problem as you) and it actually cleared up the sensor!

[@BluGames]

Yea i need to try that

[@johnperry9725]

for the throttle I recommend not using grease instead use plumper's tape (Teflon tape) on the plastic portion that slides on the rails.

[@fozbstudios]

Why?

[@lyndongaming]

why?

[@Scopedninjapc]

?

[@johnperry9725]

@@lyndongaming Petroleum products like grease and oil breakdown plastics. If you do not mind replacing the throttle go for it, however Teflon tape is cheaper and accomplishes the same thing. An alternative, if you have the money would be something like a solid film lubricant like Sandstrom 28A.

[@XP72official]

Thanks for the update man. Loving mine as well too. There is a screw on the bottom that you can adjust to change the sensitivity of the throttle. That might help you. Nice review.

[@BluGames]

thanks bro I will test that out!

[@micahpowers2614]

@@BluGames also putting a littoe white lithium grease should help too as well as the screw that was mentioned. Ill probsbly pic thus set up for microsoft Flight Sim 2020

[@jimmynich4791]

@@micahpowers2614 Just ordered mine arriving tomorrow. Never played any flying games with a flight stick so should be fun.

[@ST2611-z6h]

Let’s go Blu! Great Review!

[@BluGames]

thank you thank you!

[@SonSantana]

For me it's such a struggle to decide if I buy it or not because of the price tag in my country... =/ But your review sure helped a lot.

[@BluGames]

I understand! But thanks for watching

[@JerDog1984]

Have a look at the new Airbus stick, pretty much the same, just newer

[@lugeneparker]

Order from it from dell.com. they are still honoring the $129.00 price point for the dual sticks. Supposed to get some more in about a week or so. They are just backordered. I put my order in. I should get them in about 2 weeks. If you want the throttle with them you may be out of luck. Don't think they have it. And prices of it are nuts

[@matt79hz]

How much is it where you are?

[@matt79hz]

The throttle is nice - though it definitely needs the rails lubed. The flight stick tbough, is not really any better than a $60 Logitech in my opinion.

[@WatchMysh]

Thanks for the video and sharing your long-term experience! I linked to it in my HOTAS 2020 roundup.

[@Jakster840]

I'm probably buying this one to update from my HOTAS X. Thanks for the review/overview!

[@BluGames]

Welcome welcome. I hope you enjoy

[@curtishickerson2646]

I know that this was posted a while ago so you might not see this comment, but there is a replacement slider you can buy for that throttle that makes an absolutely massive difference. It’s made by CoreHawk3D on Etsy and it is FANTASTIC. I just installed one with the metal bearings into my throttle, and it’s now really easy to make 1% adjustments in Elite Dangerous. You should definitely check it out, it’s entirely worth the $25

[@BluGames]

Hey thanks for watching and yes in aware of the mod. Thanks fir the suggestion

[@rickdubbink]

3:52 there should be a little screw on the bottom where you can increase or decrease the stiffness, maybe thatll help

[@BleezyD]

@Blu Games

[@robertgoldbornatyout]

Outstanding and detailed review.Thank you for sharing

[@BluGames]

Hope i was able to help

[@loh1945]

In technical terms the throttle issue was somewhat big for me, same issue with the rudder, but air to air refueling is easy once you realize that you are supposed to “rock” the throttle to match speed with the tanker.

[@evilways961]

Just got my T16000t and HOTAS little less than 2 weeks ago and the Yaw/Twist on the joy stopped working.. Where to I find the guy to beat my $160 buck out of..? I mean that's what its going to take these days, other than burning down the factory and offices.. lol

[@BluGames]

Jeeeez thats horrible!

[@evilways961]

@@BluGames Yeah, opened it up, one of the wires [brown] looks to have been cut somehow.. can only get a peek as the trigger wont come off.. Unsure how I am going to fix this

[@ferrynator15]

You don't have warranty rules in your country?

[@pekmenn]

I heard jaw on stick breaks is it still fully functional for you

[@BluGames]

Yes it works for me

[@SixFootScream]

Great review. Very helpful!

[@BluGames]

Thank you

[@bigmungus4864]

u have come a long way masta Blu

[@BluGames]

Yes we have come a long way, and theres still a long way to go!

[@snetx10]

Ambooooodextrus!

[@BluGames]

Thaaaanks

[@Foldy435]

Just bought this for DCS Apache, which I'm hoping will drop any day.

[@BluGames]

Dropping tomorrow i hear

[@Foldy435]

@@BluGames any news?

[@DrCoG]

My rudder control on the stick does the same thing as your throttle rudder control. My throttle also sticks like that since new. Real light use on mine.

[@RyderSchäfer2002]

hey i’m planning on buying this, i don’t have mounts or anything, can i just place it on my desk or will it move around when i try to use it

[@BluGames]

There are small rubber pads on the bottom to keep it from sliding so you should be fine. I dont have mounts either

[@RyderSchäfer2002]

@@BluGames thank you man, you just saved me a lot of money

[@flightgamer7849]

Quality review content, thx

[@BluGames]

Thank you thank you

[@EvoUmbreon]

Hi, can you please describe how the t16000m joystick has handled through dust? My biggest concern of this joystick is dust falling into the center (the center base hole). Have you had to clean this specific area out? Or what have you done (if you had to) to keep it in good working order? Would very much appreciate response! Thank you and very helpful video!

[@BluGames]

I personally have not had a dust problem with the this joystick. But i dont leave it sitting around for long cause i use it so much

[@EvoUmbreon]

@@BluGames Oh okay awesome thank you, ya I'm just concerned about that I guess because my area even when I use things, dust just naturally keeps accumulating :( I wish they would have included some kind of dust rubber boot or something. But cool sounds like it really holds up even after your amount of time with it! I just got one myself the other day! Again I really appreciate this video!

[@Dusty7460]

my t6000 joystick died on the rudder axis. ( Lots of posts regarding this issue apparently the potentiometer is kinda cheap and bad

[@BluGames]

Yea i have heard the same for some people

[@Dusty7460]

@@BluGames yeah, that's too bad cuz the joystick is great and feels great but cheap quality :(

[@HikingFeral]

Nice video, this is what I'm working towards and no hate just kidding but "Ambudextrous" is my new favourite word

[@johnperry9725]

You had the flight stick for 3 years yet you never realized there is a screw on the underside of the stick that if you loosen a bit will allow the stick to be easier to move.

[@Aviation-xl2em]

need to put some of the lubricant on my axis have only had it for a month, some say it'll get better, than itll get worst, also did you buy the warthog or did thrust master give to you? if they gave it to you sign me up, one day i might meet the requirements.

[@BluGames]

see you at the top bro

[@Aviation-xl2em]

@@BluGames i hope so, got a long way to go but ill get there

[@akodam1270]

I bought one and my joystick buttons seem weird. The top ones are not always clicky and the vase ones are hard to press. Is this normal?

[@lasselahti4056]

I just unboxed on t.16000m stick. Do you have ANY play in the axises? If i put my finger on the top of the stick it leans 1-2 mm inside the center in x-axis. This kinda is and is not problem cause the sensor reads it. Many ppl have claimed about this. Some say the stick stays put no matter what. Well it does need any deadzone in dcs YET, but i can bet that will be a problem after some time. But thats kinda only thing that annoys me. Now when your video rolled backround again, i noticed while writing this that you even also mentioned this. It actually is not problem (if it even comes a problem for me) cause it can be easily corrected like with one to 3 clicks of deadzone with my friends stick two years old, which is nothing compared to my two year old logitechs needed deadzones. Still was kinda annoying to find that from new stick what centers hard. OFC it should have also NO movement inside that hard center. But yeah, in this price level, nothing can really compete it. BTW many ppl have put real rollerbearings in throttle.. then its kinda as long as sensors keep up stuff!

[@BluGames]

Thanks for the update. I hope it works out for you for a while

[@lasselahti4056]

@@BluGames Yeah. The stick is even "erotic" to fly after 20 years of saitek x45, though i loved that stick as long it worked. I think also that it is more clever in very hard use to buy cheaper GOOD hotas, for ~120bucks, if it breaks, so what. If I breaked 1000bucks hotas-> big cry. I feel more "have to be carefull" when i am betting my hard use on 100 bucks towards 1000 bucks. Ofc those high end sticks one can buy parts that worn etc etc kinda forever, but still... Not ANY HOTAS can compete with buttons, and quality what comes to sensors. The mechanics are what they are, but so what. And as I said earlier, this can be tuned to very badass. My friend has metal roller bearings inside the throttle. I think I will buy another throttle just for tuning it, it will feel more metallic, but then its metal to metal, with real bearings, and good sensor. What comes to the buttons / price that is also insane in the throttle. Analog TDC slew switch is something that there is NONE other in this price level. Buttons are also very nicely stationed in the throttle, and those little red buttons I use as pinkie switches. So I got 3x19 buttons in it + pov + analog + rudder axis :D and that under 100 bucks so... I totally can recommend this if wanting cheap hotas. I fly this with kinda every plane in DCS. Many ppl claim that there is too few povs etc buttons in the stick, but I always try to remind that use pinkie switches... And btw that third button under the pov switch in the stick I also use as pinkie. It can be easy pressed with one thumb while using the pov with same thumb. For example in dcs i have the view in it and trim with button3+move the pov. Thanks for good video, I think I will subscribe :)

[@lasselahti4056]

Have now used it little over a month. Learned whole f-16 with it, and have flown hornet about 60hours then. And a few hours with FC3 planes. The keybinds for hornet are very convinient to make, and with every other plane also. And btw, today I kinda accidentally binded joysticks rudder axis to horizontal view in hornet. Cut y axis to 60 and put curve of 40 or something. Now I can turn my head (have not trick IR, broken) kinda easily with it, OFC the best in it that I can look behind from stick very quickly while defending etc. (using pedals ,dont need that axis kinda for anything). Found this very nice "tip". With fc3 planes I use that same bind with throttles rudder axis (that plastic plate in front of the throttle. Though in it one must se kinda big curve..) Try this if you dont have trick IR but have pedals. ONLY thing in whole setup that annoys me sometimes, is the stickyness from the factory of the throttle.. Found that silicon spray was very good for it, but as a spray it wears off kinda quickly. And ofc "melts" original grease, more or less. But thats easily fixable. Have thinked of putting little piece of hard and not matte plywood instead of that brake spring. It seems that only if I can strut it more stiff, it would slide better. The spring jumps goes wobbly etc and that is what is causing the wobblyness of that throttle. (In my opinion TM has saved money from wrong place with that one, because it would not need much effort from factory to update that plastic sledge in a way that it would not be glunky. But STILL VERY happy with setup / price. I just like the buttons architechture in this so much that have used this instead of my more expensive hotas. :) (Actually T.16000m is very close to modern planes HOTAS. For example F35 has sliding thorttle with A LOT of buttons and knobs and what ever, where stick has been trend to be made more "just a stick". The planes have gone so good IRL that the stick is the one that one makes less touching :) Or.. well you guys get the point..

[@lasselahti4056]

And oh The original "movement inside center zone" has gone away totally just by using the stick. I think it was just the spring rolling to its place. I even drawed back the warranty question / "Ticket" from TM. I think I will buy one of these just while I still can... It goes like 100 euros now in Finland! (HOTAS set)

[@smallbrain43]

Thanks for the review, I'll probably get this one for my starter setup. I was originally planning on saving up for the rtx 3070, but I recently got into flight sims because of msfs2020, I'm quite big on the airliners and I've mainly just been using a k&m with a controller for everything, but since msfs doesnt have any military planes I'm moving to dcs for that part but I dont think it would go very well with all that I use for flying an airliner. This seems like a pretty good starter HOTAS for the price, I found a joystick and throttle combo for $230 on ebay, I'll probably be getting that one.

[@BluGames]

Nice enjoy

[@stevenross-watt8640]

Most of our local (uk) retailers are sold out of most every flight stick. I guess msfs2020 has a lot to answer for!

[@beezymeech]

Steven Ross-watt this joystick is available now for 69$

[@stevenross-watt8640]

@@beezymeech I'd like the package with the throttle included. I've checked most places and can't find it available for the regular price. So i ordered direct from thrustmaster and await their new stock. Thanks.

[@gavinbranch5467]

you can get the combo for $160 on B&H

[@MrSomethingdark]

I drilled some hole, some threaded rods M6 for the thrustmaster as stated in the specs, a piece of plank and some plywood, mount between the legs and this baby is really good. If you can drill the table it's like two holes at the edge towards you. I mean it cost me 2 dollars all in all in off cuts I had lying around. This is where it shines. Replaced the spring, just like keychains through each other just unwind the spring through the cable and wind in a new one. Do want to wind a new spring as this one is really loose made from random wire. But you have the fine control when it;s between the legs. It's really moddable. And as a righty, I keep the handrest on the left and get a longer stick. That way I can hold it way lighter and stay relaxed on 2 3 hours flights. And do grease it please. Acrylic grease, I used this one found locally used in espresso machines.

[@Senor0Droolcup]

Great review and I use this same system as well. I am just getting started in DCS and I wonder if there is a place to download good profiles for this system for the DCS planes I haven’t really found any good ones on the DCS site

[@BluGames]

Honestly i havent found any either. I have had to make my own from scratch everytime. But if you find one let me know

[@raveouscarlias4479]

Love the Thrustmaster T1600m~!

[@3CODKing]

with the rails couldn't you oil/grease it up to make it smoother? or use some type of special liquid to do so?

[@retireddoc6145]

I have the T.16000 joystick for two years and it has been really great, but a few weeks ago the "Twist Stick" became noisey and inrratic and moved without me twisting it and became unusable. Loading the latest driver did not help. Very disappointing. Thanks for the video.

[@BluGames]

Yea sad to hear that

[@TheIrishez]

Is it awkward to control rudder with that rudder pedal looking thing (flappy thing lol) while also controlling thrust with the same hand? I'm thinking about picking this up for Star Wars Squadrons.

[@BluGames]

It takes getting used to at first but no its not Wierd

[@TheIrishez]

@@BluGames Awesome, thanks for the reply! Great review, I think Im going to pick one up! Subscribed

[@jennifersensenig9984]

Great video! Thank you!

[@BluGames]

Thank you very much

[@Smashachu]

The throttle, they use a cheap plastic on metal design for it. They sell on etsy a replacement plate with metal on metal roller bearings and it even gives you magnetic throttle detents for afterburner and 50%. It's like 20 dollars but in my experience it completely changed the quality of my stick.

[@jacobsolomon6847]

yo dude somewhere on the throttle (I think) there's a tension screw to make it more easy to increase/deacrease throttle

[@samialg7901]

Hey, thanks for the review. Is the slider on the joystick a throttle slider? Or do I have to buy the throttle too?

[@aawillma]

Standalone stick is fine. Twist axis for rudder, slider for throttle.

[@samialg7901]

@@aawillma Thank you!

[@GLENMSI]

does this joystick has force feedback?

[@BluGames]

No

[@larsvanbree47]

the throttle controller is that for left hand to that you know?

[@BluGames]

The throttle is left handed but i have also used it for my right hand

[@larsvanbree47]

@@BluGames thankssss man!!!

[@keizerpapi2735]

Please help me do you need to have the pedals for flight simulator 2020? And what do you need them for?

[@BluGames]

You NEED them but if you can offord them. It will be bettter WITH pedals

[@keizerpapi2735]

Blu Games thank you

[@aidenaviation]

Does the throttle have reverse thrust?

[@BluGames]

No. You need to map a thrust reverse key

[@Chinx313]

I don't wanna be that guy but I'm watching this video 3 years later...

[@BluGames]

Haha, i still stand by everything i said.

[@Chinx313]

@@BluGames 6 years later video CONFIRMED!!!

[@user-wm6lt3fi8l]

Does this support spoilers, speedbreaks??

[@zblazek2]

I am not having issues with the floppy thing you mentioned (I use it for zoom view in DCS) , but with that little joystick, you said you started using for a rudder. I am using it for radars in DCS and this thing does not stay centered for me after some time and starts running around. First time they've changed whole throttle under warranty , now I have claimed it again, so I am hoping for new one. But it is annoying AF to be without it for a few weeks, of course. Perhaps I'll need to upgrrade too. :)

[@FlyingAce1016]

Have you had the issue this stick is known for yet? There is a bit of plastic that sits on the sensor and over time the sensor stops working if you dont file/cut it down internally. Thinking of getting one but worried about that issue.

[@BluGames]

Personally no. But read through the comments for others thoughts

[@FlyingAce1016]

@@BluGames thanks! it doesnt seem too big of a project to fix even so think I may pick it up and just do that little DIY fix Also for anyone else reading the new Thrustmaster airbus sidekick has the same interal structure so it also has this issue /r/flightsim I believe has a tutorial on how to fix three internal common issues.

[@corennet.6776]

Get the Airbus edition coming out, might have this fixed.

[@urlond9371]

@@corennet.6776 To bad their mostly sold out.

[@urlond9371]

My sensor died on me, and I do not like taking apart the t1600m becuase of the pin that holds the trigger on it. It still reads my Twistt, but I dont wanna take it apart again and try and fix it again.

[@TheLukemcdaniel]

This one isn't convertible. They make one that is designed to be used with either, and they put out a set that's two of these sticks, with one of them being fully reversed so you can dual stick it.

[@benlogan100]

Great review. Thanks!

[@Halz0holic]

I managed to order the one with pedals for $250.. currently market is really bad for these because of Flight Sim 2020 and Star Wars Squadrons. They are selling the entry level HOTAS (no-pedals) at $200-$300. This one without pedals is going for $300

[@keanevdb2587]

Is it compatible with xbox series s and x?

[@BluGames]

Sadly no

[@MrEDET]

Thanks for the review! I planned buying this but after you showed how jerky the throttle slides.. I'll keep searching for something better :)

[@terratex904]

you can buy it. he just doesnt know how to adjust it

[@MrEDET]

@@terratex904 I saw some videos on how to open it and use lube to make the rails so smoother, I don't think only adjusting the tension ring helps enough? I'm still not too sure. I have a (20 years old) X45 now and the throttle is still buttersmooth. This thrustmaster does seem to be a bit.. plastic, fragile made?

[@acrobaticalpaca6675]

Good review there

[@BluGames]

Thank you

[@shadow60210]

For those having sticking issues this stuff works wonders. www.amazon.com/gp/product/B00W6KWK1Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Clean off the original grease put some of this on and work it in. My setup moves like a hot knife through butter.

[@rohesilmnelohe]

I'm not sure you'll ever see this, but there is a combo pack that slams in a rudder pedal set. (~220€) If you had all three, what would you think? Using the z axis on a joystick seems a bit clunky. Throttle one might be ok though. Anyway.. Ideas?

[@heisenberg3778]

For your throttle, just unscrew the base and spray metallic rails with WD40 lubricant and it won't be so stiff. Makes a huge difference.

[@BrandonIslander]

I would be concerned that the wd40 would deteriorate plastic parts

[@Sokol10]

The correct is use Nyogel 767A, that lubricates and add dampening effect.

[@jayanth777]

@@BrandonIslander use silica based wd40

[@Imagination972]

Will the T16000M work with the Xbox Series X or does it already work with the Xbox One? I need a joystick for the next week (Flight Simulator 2020) on PC. At the end of the year I want to switch over to the X with it. Does it work?

[@sspballe]

Your rudder problem is the twist joystick transducer

[@sickboy123uk]

Nice review 👍

[@BluGames]

Thank you thank you

[@nealgray2744]

Is this for ps4 as well?

[@paxtonwhitaker1064]

There is a Adjustment screw for the throttle on the bottom

[@Pozer714]

I have 3 old Microsoft Sidewinder Precision 2 Joysticks, the originals! I spilled some Jägermeister into one about 20 years ago so put it away, got it out recently and was stuck at first but after freeing it up works just like new! I'm wondering why the prices of the Thrusmaster T.16000M FCS HOTAS shot up in the past month or so from around $140, to almost $300 now?! "Sucks", it's everywhere and I see no one here commenting about this price hike. Wut's up with that? I want it for the Elite and Dangerous PC game. Thanks for the nice video, hope you have many more years of happy gaming with this joystick! I hope the price will drop soon!

[@BluGames]

Its because Microsoft flight sim is out and product stock is low & demand is high. Prices should come back down hopefully by the end of the year

[@lucifervivo3272]

Same for me and 2 elite dangerous clan mates, the main trigger malfunction, and the jaw pedals too. T16000 its 2 years working then begin malfunctions.

[@Blountyyy]

love the video bro

[@BluGames]

Thanks so much

[@Blountyyy]

@@BluGames just spent 150 on one because of this vid :)

[@BluGames]

Enjoy my friend

[@SargeantKoranFlusher]

Well.....with those 2 faults you mentions.....the throttle slider and the rudders....it is to me unusable. I'll never risk buying one now. That's is bad bad bad!

[@nathanksimpson]

A lot of reviewers put lithium grease on the throttle.

[@ulrichwilsenach4411]

Set the throttle pressure using the screw on the back

[@FlyingBrezzely]

I want to buy it but first I will save money for it nice review 👍

[@seebarry4068]

There’s a mod for that sticky throttle. Cost about £€$10

[@BluGames]

Yea

[@latham8038]

I always thought how I’d fly a Cessna or a 4 engine 747 with a warthog joystick and throttle

[@IamJoeTV]

Theres a lot of servicing you can do, open manual and read.

[@cristianherrera4347]

Does it work on xbox

[@TheBloatedChap]

Man I just want to be able to buy one of these from an actual supplier but no there has to be a damn shortage

[@KjKase]

Heh, I went to try and buy one for new microsoft flight sim and I saw they were WAYYY overpriced everywhere, but I found a local Canadian business I was able to buy them off of for normal price thankfully.

[@j3steven]

@@KjKase what was that business??

[@KjKase]

@@j3steven memory express

[@Minib34ts]

If the pedals are worth it I'll probably get the full flight pack

[@larkinplace3452]

I know it's going to change with games but it was a lot more fun to watch infinite flight

[@miliano8274]

1. go to the gym. 2. open it up, and use lithium grease on the sliders.

[@BluGames]

Gym??? Lol

[@noodleman5464]

do 4 years later

[@spaceman022]

Just now replacing a thrustmaster i bought in 2014 haha

[@BluGames]

What u upgrade to?

[@MrHonist1]

pls no greas,,, silicone spray would be best

[@mrcontroversy222]

I know this is old but you need to grease them shits

[@BluGames]

Its all good. Thank you

[@ForeheadSweat]

Found one in FB Marketplace for $120!!! It's almost $400 on Amazon yikes inflation

[@RW-zn8vy]

I got mine on amazon for 150 two days ago. I somehow got lucky and they put it back in stock for a brief second.

[@ForeheadSweat]

R W wow that’s good actually! I tried haggling the price a bit since its used but it works perfectly when I tried. I love new things but I don’t mind saving some money

[@RW-zn8vy]

LVL 69 Crook haha yea I feel that.

[@ForeheadSweat]

R W so lucky tho, enjoy yourself!

[@RW-zn8vy]

LVL 69 Crook thanks man, you too!

[@EvillNooB]

hmm, they look like new

[@qad417]

All problems with throttle are EASY FIX! Did it my self, You just need to use Your brain.

[@larkinplace3452]

Play more infinite flight