How to swap the position of Brake and Clutch pedals. Will probably void your warranty but easy to do.
Пікірлер: 19
@retchiefmac6 жыл бұрын
I did the same mod and it worked out GREAT!!! However I decided to just disable the clutch completely and I used the clutch wires to extend the brake wires.
@user-go9tc3cw4b4 жыл бұрын
Very helpful vid, although I didn't do exactly what U did it helped me achieve what I wanted so thank you.
@mrtower57662 жыл бұрын
I'm having the same problem , great video .
@tyskeren7165 Жыл бұрын
Yesterday my break pedal begun to keep a bit of break pressure at all time if not it works with a good cleaning where can i get a new sensor for the T3PA Pro? Anybody that can help. And many with a better cooling fan also for the T300rs??😁
@ckooz360vr63 жыл бұрын
Dear sir, can you do the same with the tlcm? Im dying to get the brake and gas more sepperated
@revirdkcalb4 жыл бұрын
What kind of wire did you use exactly to elongate the throttle wire? Is it like the ones you find inside of pc's connecting stuff to the motherboard? And also would this all work by just putting the wires together and taping, instead of soldering (since I don't own a soldering machine)?
@randallpatrickc4 жыл бұрын
Yes - any sort of wire like that would work - I think if you twist the ends together very tightly or use a little screwed terminal block you'd be ok.
@revirdkcalb4 жыл бұрын
@@randallpatrickc Great. Thanks a lot for the reply.
@demdjen774 жыл бұрын
Isn't it possible to just calibrate the clucth pedal as the brake pedal? Thanks.
@randallpatrickc4 жыл бұрын
I didn’t see a way to do that
@MuddyGamer6 жыл бұрын
why not just use the old 2 peddle set from the tx base?
@randallpatrickc6 жыл бұрын
Wanted to use the T3PA Pro for increased resolution and ability to use the conical brake pedal mod from BBJ Sim Racing kzbin.info/www/bejne/kJ6vZmmtYpZ6jq8
@MuddyGamer6 жыл бұрын
fair enouth i just upgraded my brake mod to the 60 shore blue bbj. how did you find it after fitting. im yet to fit mine
@randallpatrickc6 жыл бұрын
Muddy Gamer I tried the harder one first and, although effective, was pushing my seat away with the effort.. settled on the blue which I really like. I have it about 2mm away from back of pedal. Let me know how you like yours?
@tyskeren7165 Жыл бұрын
Nobody that can help plzz?? Really need some advise of some kind 😁
@Jail-Left-Wing-Traitors2 жыл бұрын
what fucking car do you drive where the bastard brake is in the middle ?
@simulatorMarcin5 жыл бұрын
The change is not necessary, the spring force of the gas and the clutch is the same, If steering wheels Logitech G 29 do not have electronic MOD and other steering wheels, Pedal will work properly because in games You can set the clutch on the gas pedal. we set the gas as a clutch in the game. everything works correctly in its place so why change it and lose the guarantee do not understand completely.
@TipsyBobMcMayday5 жыл бұрын
He is not setting the "GAS" to the "Clutch". He is swapping the position of the BRAKE and the CLUTCH because the brake is too close to the GAS. It's a more comfortable position to drive with the brake on the left side and the gas on the right.
@simulatorMarcin5 жыл бұрын
@@TipsyBobMcMayday yes you are right I was wrong, sorry