Ordered it right away. Now cannot wait to feel it in action.
@2FuriousFreak3 жыл бұрын
This is a really neat mod, awesome! I just have a question; in your Link it says the box includes one teflon pad. But in the video, you are using two? Does it mean i need to buy a second one or else i will end up with a gap on the other side? And how well does it work together with your sequential mod from your other video? Cheers
@essa28_fsr4 жыл бұрын
Love it. So simple but solves the problems others live with. Might have to get this sometime soon.
@KRtekTM3 жыл бұрын
I really like your mod. I have just one question - is there any significant difference between M6 and M8 spring ball screws on haptic feel and which one do you prefer? Thanks a lot for your reply and for the mod itself!
@kasiusklein4 жыл бұрын
Looks very good Peter!! Nice job!!
@petermakesthings73424 жыл бұрын
thank you :)
@bryan20094 жыл бұрын
Well, i have mine... looking good. Going to head over to the PMT thingiverse page and print his H gate mod before i fit it. Thanks piotr, your a legend!
@ahmedmohmed43464 жыл бұрын
does it still good not break or anything ,is it durable?
@bryan20094 жыл бұрын
@@ahmedmohmed4346 its still going superbly strong and feels as it did the day i set it up.
@ahmedmohmed43464 жыл бұрын
@@bryan2009 thanks you made my day i just order it 2 days ago and never watched review before ordering but i started watching after ordering every body complain about the feel , this solve it hopefully
@bryan20094 жыл бұрын
@@ahmedmohmed4346 personally, i haven't seen any complaints about this mod from Peter the awesome designer guy. I have been able to get the definition and feel i want when entering and exiting gear changes. I haven't had to re adjust it in any way to keep it good. And, still feels nice and smooth when between gears. I think Thrustmaster should just realise that employing Peter would be the best decision they ever made ;)
@wwjnz92633 жыл бұрын
I still like this video, and think that your solution would be the best way to go if I planned on keeping the TH8a shifter, but I am tired of the miss shifts with this shifter. I keep getting hung up on the gates.
@TheMunkyMagic4 жыл бұрын
Another great mod Peter, thanks!
@petermakesthings73424 жыл бұрын
thank you :)
@markweatherall74373 жыл бұрын
Looks great 👍what type of grease is used and where could I buy the Teflon glide pads because not available on ebay. Thanks.
@ericohman4 жыл бұрын
Nice! Halder makes ball plunge screws that rotate, to avoid friction in applications like yours (Y)
@itsmebryan3 жыл бұрын
Did you try it? Which one did you get? How much are they?
@ericohman3 жыл бұрын
Bryan Lee I went with the standard ball plunge screws and it works great. GN615.3 type, can’t remember thread size though
@dewolf494 жыл бұрын
Excellent Ideas with this mod! I think I'm going to try to print a version of it for myself. One question though- how do the spring ball screws screw into the mod? Do you have to cut threads into the print?
@petermakesthings73424 жыл бұрын
You force screw them into the plastic and it holds in place, can use some locktite to prevent them from getting loose, but I had no issues so far, just need to pay attention the first time to keep them straight, or u could use threaded inserts and push the inside after heating up with soldering iron
@Phos32121 күн бұрын
Hi Peter, I'm having an issue with this mod. Whenever I insert the spring ball screws the mod breaks (layers split) do you have any adivce for this? I print with 25% infill, pla+, walls x3. I inserted it with allen key really slowly turning it in, but it just breaks (I tried two different prints, wide and narrow model) I'm newbie in 3d printing not sure what I'm doing wrong
@jonelsorel Жыл бұрын
Great design man. Beats both the 3DRAP and Nolitto3D one by a mile. Ordered just now. Any plans to make a short throw shifter knob for the TH8A?
@smokehead53182 жыл бұрын
Peter, I really don't know how to put that zip tight, every place I have tried it was interrupted by shaft moving. And element is moving up and down with shaft move anyway.
@davidfernandes53593 жыл бұрын
Thanks for sharing! Do you have a link for the thumbscrews that you use to hold the plate?
@davidfernandes53593 жыл бұрын
never mind! I found your other video.
@R0V0lv03 жыл бұрын
Do you think felt pads could be a cheaper substitute to the teflon pads?
@petermakesthings73423 жыл бұрын
That's actually a very good idea, definitely worth a try, should be just fine
@markweatherall74373 жыл бұрын
Hi there, where could you buy the felt pads please, the Teflon pads are unavailable using the provided link? Thanks.
@shikoXcore4 жыл бұрын
Amazing job! the "nolitto3d ClixBeetle-Pro" Screws and ball are gonna fit in the "M8 3.5mm Wide" model? thank you!
@petermakesthings73424 жыл бұрын
I have no idea I'm afraid, but it's a small model and you can print it quickly to check yourself
@AlessandroGherardi4 жыл бұрын
Hi Peter, thank you for this awesome mod. I see that the ball plunger you suggest come from China and take more than one month (to UK). I couldn't find any other M8 12mm with a shorter delivery time. Do you have any suggestion? Thank you
@petermakesthings73424 жыл бұрын
yeah I'm struggling with sourcing the parts for my projects as well, it's like nothing is available on ebay directly from uk recently, guess only thing we can do is to wait for local sellers to restock or order from CN and wait, you could try searching on other websites like eg berger tools
@AlessandroGherardi4 жыл бұрын
Peter Makes Things thank you :)
@lfbarniАй бұрын
soooo nice!
@Sickap12 жыл бұрын
Random question where did you get the thumb screws for the shifter plate. Ty
@PhrozenN4 жыл бұрын
Hi there, love your mod, I printed it in PETG for my th8a and it works awesomely. The PTFE pads were damned expensive though, but maybe you could use mouse glides instead? They're cheaper and thinner than the pads you linked on thingiverse
@petermakesthings73424 жыл бұрын
the advantage of using these pads is that they're rubbered and therefore the fit doesn't have to be perfect (whether that's my design or slight variances due to people using different printers), one could though use the mouse glides and put them on a piece of rubber, would have the same advantages and cheaper.
@markweatherall74373 жыл бұрын
Hi, Teflon glide pads are unavailable now, what else is available please?
@alexiswerfeli49214 жыл бұрын
Dude you're a beast ! at least you should use gaming mice teflon pad ;-) it's 0,6mm thin so you dont have your hole !
@filipkazik86002 жыл бұрын
Zdravíčko, vyrábate aj ten žltý plate? Vyzerá super.
@redeyerob21763 жыл бұрын
Hello peter, i recently bought this mod from you afew months ago but a problem has arose, the back right plunger now doesn't stay in place anymore as it seems to have eaten up the threads, is there any solution to this?
@lokmanfreeman4 ай бұрын
thank you
@overtime944 жыл бұрын
ANother Great mod, Wow. Will this effect the sequential mode or just H pattern?
@petermakesthings73424 жыл бұрын
this is just for the h-pattern, I made a different mod for seq
@brockj15454 жыл бұрын
@@petermakesthings7342 you mentioned in the sequential mod video that the M6 spring plungers damaged the shifter. Did you find the same thing with this, or does the grease fix that?
@petermakesthings73424 жыл бұрын
@@brockj1545 for seq mod I didn't want to use the grease because it would get the whole shifter shaft messy, and so I reversed the design so the plungers slide over teflon piece of TH8 stick, now for this mod, because it's all hidden inside and you don't really need to ever remove it, using the grease was not a big deal, and to answer your question - yes, absolutely no issues after wks of use (as you can see on the video I added a pretty generous amount of grease :)
@brockj15454 жыл бұрын
@@petermakesthings7342 awesome, good to know! Thanks!
@napalmhardcore4 жыл бұрын
You really need to partner up with someone that can produce some of your designs. Not having a 3D printer and the hassle of sourcing parts is enough to put some people off (myself included). I'd happily pay for a well thought out design like this. I'm curious. Do you own a TSS handbrake/shifter, and if so do you have any ideas for improving the tactile feedback of the sequential mode? I've held off buying one because of the reportedly poor feedback when shifting and I'd probably spend more time in sequential mode than handbrake mode.
@petermakesthings73424 жыл бұрын
re 1 - soon :) re 2 - I have it, but tbh I don't know why people are complaining so much about it, you don't have a 'click' when changing gears yes, but travel is short and you hit a metal bar when at the end of movement so that a pretty strong feedback :D I might do something for it, but not anytime soon as I'm working on a number of complex projects
@napalmhardcore4 жыл бұрын
@@petermakesthings7342 Thanks for the reply and good luck with your future projects :)
@binaryfuzion3 жыл бұрын
How's this compared to the clixxbeatle gt?
@alexiswerfeli49214 жыл бұрын
hi peter ! you're work is awesome, but have you the raw file with out the hole for the pads, because i found the perfect pad, the teflon pads of a mice, but it's 1mm thick so i haven't the possibility to fit in your model. so i need to make another one for this spécifique pads, i can resend you after and link you the pads of teflon i use and a vidéo of the résult for sure. thank's in advance for your response
@petermakesthings73424 жыл бұрын
hi Alexis, if you already have the mouse teflon pads just get a piece of rubber and glue it between the 3d printed piece and your teflon pad, will solve the problem and be much cheaper :)
@DAVIZINHOXX Жыл бұрын
hello! what is the filament recommended? pla? and whatt infill percentage? thanks!!!
@petermakesthings7342 Жыл бұрын
Pla will do just fine
@ahmedmohmed43464 жыл бұрын
Can you share the 3D model of the yellow upper plate please..thanks in advance awesome tutorials and mods
@petermakesthings73424 жыл бұрын
the links are in this video: kzbin.info/www/bejne/a3eylWWNbcejeaM
@ahmedmohmed43464 жыл бұрын
@@petermakesthings7342 you are the best of the best of the fr**kin best
@EricGibson14 жыл бұрын
Hey Peter, I see that I am able to download the 3d print file (I don't have a 3d printer). I am wondering if this is a mod that you're able to sell also or if it's just the files? If files I'll have to have a friend print and ship to me. Thanks in advance.
@petermakesthings73424 жыл бұрын
I'd go to a 3d printing fb group or a forum and ask if someone living close to you could make one, it's using very little plastic so it's cheap to print, I don't sell these cause can't even keep up with the demand for quick release mods
@daemon3spade2 жыл бұрын
What is the size of the thumb screws?
@llSnKll3 жыл бұрын
Just received the mod today and tested it a bit, honestly I'm quite disappointed. The design and fit seems pretty good, except the zip tie that you need to let loose elsewhere it'll kill the feel on one side. The real problem seems to be spring ball screws, which adds very little resistance, there is no real mechanical feel, it just feels like without the mod but with a little bit more resistance. I really like the fact the mod not overpriced unlike others, but if you are looking for feeling more than price I think other mods would probably do the job better
@alfredorodriguez45394 жыл бұрын
Would like to test one of these
@petermakesthings73424 жыл бұрын
well it's available for free so give it a go :)
@simracingnabani19183 жыл бұрын
Ziomek gdzie to kupić, wyślij linka
@gabriels.7134 жыл бұрын
Is there a version without the teflon pads?
@petermakesthings73424 жыл бұрын
there's a version that enables you to use mouse sliders with some rubber glued under it. You can search for other designs on thingiverse that are made fully out of plastic, but these create too much friction for my liking.
@StefanoV__4 жыл бұрын
Peter Makes Great Things should be :))
@petermakesthings73424 жыл бұрын
:D thank you!
@phildimitriadis50414 жыл бұрын
mate do you sell these products?
@petermakesthings73424 жыл бұрын
I don't, but check on www.kapral.store, he makes some of my designs, you can ask him if he could make one for you
@takatakataka135794 жыл бұрын
Do you know what is small wire for 4:39 ?
@petermakesthings73424 жыл бұрын
this is the wire that connects a switch on top of the shifter (which identifies a seq shifter plate has been mounted) to the main pcb on the bottom, I think it's the jst 1.25 or 1.0, didn't check what connector it is exactly
@Matt-dh6yo4 жыл бұрын
MODS and DIY in 2020, EASY PZ build, just 3d print this part...................
@edzus1003 жыл бұрын
Could you make the whole shifter which looks like this, works like this, mounts like this ... but costs 100 euros less. ... :D damn niche items cost a lot.
@petermakesthings73423 жыл бұрын
only option would be to 3d print one yourself, I didn't try any of the designs but there is literally nothing worth using that's cheaper than th8, so if you have a 3d printer try printing one, if not... idk, summer is close, get a temp job and treat yourself with a fancy shifter :D
@BACKSTAGE-b3v4 жыл бұрын
cool!)))
@shanesheaffer2194 жыл бұрын
are these for sale?
@petermakesthings73424 жыл бұрын
it's available for free from thingiverse if you have access to 3d printer, otherwise send me an email petermakesthings@gmail.com