TIA Portal: How to Make Flow Totalizer in LADDER and use it?

[@KevillyKetterson]

THANK YOU SO MUCH MY FRIEND, I'M A BRAZILIAN STUDENT, I ONLY WAS ABLE TO SOLVE MY PROBLEM BY WATCHING YOUR VIDEO!

[@faridautomation]

Thanks for the comments

[@ASHWANISHARMA-ng9ix]

I like your videos and really appreciate your hard work, but I am thinking you divide current flow l/h to period 3600 to get l/s but what the need of multiplying l/s value with cycle 100 because you are already adding l/s value to total at 100Ms interval so, can you give a detail explanation for that, I am really hoping to get a reply from you thanks. 👍

[@KD-xp4di]

He is assuming L/min, that's why he used a minute in the Period. Time 17:11 in the video

[@kautechmz]

I´m grateful. Thank you sir. very useful content

[@KD-xp4di]

Good Job, and thank you for posting this good content.

[@nelsonpantaleon7751]

Sir farid i hope as your promise about dp transmitter for LRV and URV calculation for hydrostatic pressure open and close tank because i saw many time for this calculation what is this calculation use for and this program sample use for im just confused now how this calculation related for plc programming thank you sir

[@faridautomation]

I will share the video soon

[@oliahmedrose6479]

Brother is this program going to work at pulse signal ??.

[@faridautomation]

No..

[@oliahmedrose6479]

@@faridautomation is pulse signal used for analog plc or digital plc?

[@oliahmedrose6479]

@@faridautomation and what will be the program for flow totalizer when we have pulse signal for plc input

[@faridautomation]

@@oliahmedrose6479 if you have pulses from flow meter than you have to use high frequency counter input in your PLC than convert that pulse to flowrate as per the datasheet of flowmeter. Better to use a controller which will convert pulses to analog signal then you can add that analog signal to this totalizer block . If you want I can give the ref of that controller.

[@oliahmedrose6479]

@@faridautomation yes please..that will be very helpful

[@reginaldovicente9286]

Parabens, obrigado por compartilhar as informações.

[@faridautomation]

Difficult to understand

[@claudio1371]

Muchas gracias

[@asifislam7376]

Hello sir.. Hope you are doing all.. I have a request.. Can i get help about a flow meter totalizer?

[@faridautomation]

What is the output signal of your flow meter?

[@asifislam7376]

@@faridautomation hart 4-20mA.. I need monthly totalizer and Every month automatic reset which transfer the old value to another memory.. For Factory use...

[@faridautomation]

Is that a mA or pulse?

[@asifislam7376]

@@faridautomation mA

[@faridautomation]

You didn't reply about your signal ?

[@nelsonpantaleon7751]

Thank you very much sir farid for this wonderful video appreciated 🙏 . One thing sir farid in main ob that you call the Fb in input period you put T# 1m because this is for minutes how about for second or hours can i put direct in that period like this T#1s or 1hr no need to edit in the function call if ever change Im looking for next video about cyclic interrupt You are awesome sir farid thank you

[@faridautomation]

Yes , that's it no need to change inside the block

[@Darkmake128]

Thanks

[@mahfuzurrahman6300]

Dear sir , আমরা PLC S7 300 or S7 400 এর উপর একটি সিরিজ টিউটোরিয়াল চাই।

[@joislennymendozaloayza8729]

Thanks