TIA Portal no accessible device found in selected network PROFIBUS - problem solved

Pridružite se kanalu da dobijete pristup pogodnostima:
/ @muhamedpasic83

[@muhamedpasic83]

The PLC is with PROFIBUS, are you using the same cable as I am in the video, and what type of PLC is it

[@loicnzundja656]

Ethernet And the type of plc is Siemens s71200

[@loicnzundja656]

Can I have your email ? Please

[@muhamedpasic83]

@@loicnzundja656 The IP address on the PLC and the ethernet cable should be in the same subnet, eg 192.168.0.x. x can be for PLC 1 and for ethernet cable 10. TIA Portal should automatically assign the appropriate IP address for ethernet, but if you have a problem, add it manually. Manually assign an IP address to the network adapter

[@loicnzundja656]

toujours rien sa me casse la tete . puis avoir votre adresse mail s'il vous plait

[@loicnzundja656]

non même manuellement il sort la même erreur

[@muhamedpasic83]

Create a new project, do not add or create anything in it, and click "accessible devices" and see if you can connect to that CPU