TIA Portal: SINAMICS G120 with STARTDRIVE (Free Download) Part 1/2

Setting up the Motor Control using an G120 Motor Drive using TIA Portal V15
FREE Download Startdrive here: support.industry.siemens.com/...
Contents are:
- Installing the neccessary Plugin for TIA (STARTDRIVE)
- Adding the Control Unit
- Adding the Power Unit
- Commision the Control Unit
- Selecting the correct Motor Data
- Ramp up / Ramp down
- Using the TIA Control Panel for G120
If this video helped you, please consider helping me by joining my "GoFundMe" and donating a small amount to my cause. Link here:
www.gofundme.com/f/let039s-fi...

[@TheEisel]

Cheers from Sweden! I and my classmates are very thankful that you're making industrial automation studies both easier and way more fun.

[@HamedAdefuwa]

thanks a lot for these tutorials, im getting comfortable with TIA portal thanks to you. These 2 videos on Sinamics G120 were a bit random in the TIA Full Playlist, just going through that playlist now.

[@bevaninaustralia]

Thank you Hegamurl, so nice to see a Siemens video that we can hear you and understand what your saying, Good Work!!!!

[@mariaholen3694]

These videos are lifesavers for automationstudents, thank you for making them ;D Can you please make a video about trends and logging data from drives?

[@nielshebsgaard919]

Thank you for your fine videos :) I have not been in the game for long, but you most certainly have helped me on the way - and now with startdrive video 1&2. Niiiiiiccccee :)

[@hegamurl7434]

Happy I can help! You'll be back in the game in no time!

[@mehmettevfikcete3397]

You are , you are, you are ... incredible man. Thank you sooo much.

[@hegamurl7434]

You are very welcome!

[@garyollison8027]

Really appreciate what your doing!

[@anything_can_happen79]

Brilliant as always! Thank you

[@user-li1mt7yi7t]

Best Regards from Sweden I find your videos very useful and you are very humble man with a lot of competence, many thanks again and again.

[@X400DYL]

Great Informative and clear, Many thanks from UK

[@fs8617]

Thank you very much ✌🏻 learned a lot more than in university!

[@johnpuram]

Its great video for those who start as beginner like me with TIA portal. Thank you so much bro for detailed explanation for free down load from siemens site. Now I am being confortable with it.🥰👌

[@MultiNbaman]

thanks man, explained perfectly!

[@ahmedatef5563]

Please continue making tutorials 🙏

[@godknowsrusimba463]

great videos, im actually learning a lot as a plc beginner.

[@longbeachboy57]

8:50 I never click on the help button. I just go to this channel. Problem solved :)

[@informationproject9499]

Thank you very much ...i am really thankful to you for this video .

[@amaratkari6919]

Really nice explanation.

[@rafeequetarafe1331]

Thank you for your works

[@mou4521]

Thank you for this!

[@francoisfernier618]

merci pour la vidéo. très bien faite

[@framos9991]

Thank you! Educational!

[@bhejula1]

Thank you very much for this video.

[@TheDvd3000]

Hey! Love your videos! I got a question regarding a G120C frequency converter. I set up multiple without any problems, when i suddenly had trouble connecting to a few. Would you say Isochronous mode is a must for all frequency converts?

[@felixmutandi4753]

Thank you sir, it possible to teach us how to start VFD with PLC(G120 Sinamic)

[@SlayedSOUL]

hey bud, you are so helpful and full of information in your brain =) i have g120x but that packages dont include X. do you have an idea about it. i searched in siemens but i couldnt find.. hope you help me. because that basic panels make me sick =)

[@shaijuj2380]

Well explained, thanks

[@aniket7111]

Sir thank you for this video..... please make a video on servo drives

[@rafeequetarafe1331]

Is it possible to configure third-party VFDs using the TIA portal? For eg: Grundfos VFD pump to be configured using TIA.

[@pandekage1233]

More of that stuff :D

[@hegamurl7434]

Doing daily uploads of TIA these days, more and more coming up!

[@recepaydemir7366]

Hi Do you have an example of reading data via 3RW44 softstarter profinet? Thank you

[@md.abusaeed9874]

excellent tutorial

[@valentino7133]

Thank you for the video. What if we had multiple drives and one failed, how would we down parameter file on the computer to the drive ?

[@mayonaisefrank8881]

U r the best dude.

[@damienoneill9239]

Hi Hegamurl, is there somewhere to download an fb to control the drive?

[@jasonryan2175]

thank you so much

[@erdaltas1691]

THANK YOU

[@markorestism6109]

Спасибо большое!

[@anilvlogs1731]

Any idea how to be use pzd in different different applications

[@md.asrafulhasanapu8587]

Hello, Is it possible to drive a third party servo with seimens servo drive like sinamics V90.

[@bratan7673]

I have an issue . The ready light is red and the motor will not run. Any idea?

[@anandrao2308]

well explained

[@user-uf3uo1xw7i]

Спасибо друг!!!

[@luanmanh2602]

thanks soo much ! i have a G120 CU240 e-2 PN I want control with profibus and terminal . i set parameter p1000[0] = profibus p1000[1] = fixed speed command data p0810 =r722.0 (DI0) but profibus only run . please help me .

[@jiewenmai]

The problem is , if I choose PZD2/2, I cant get current and Torque feedback from the VFD, so can I choose PZD 6/6?

[@vorapobautomation9760]

Can you teach configuration and programming SIEMENS Servo drive system and synchronization ?

[@hegamurl7434]

Unfortunately have not worked with the Servo Functions enough to really make a video about it... maybe I'll get a servo drive in the future, as I am personally also interested in those

[@yacinesafsaf9902]

Can you make a tutorial about S120

[@prabhakarans4623]

Can someone provide guidance on how to establish communication between a Siemens G120 drive and C#

[@Sh_Firouz]

danke dir

[@anilvlogs1731]

Plzz make video how to use pzd in g120

[@JinsonKurianVJames]

Nice

[@raghuraom9772]

hi, how to communicate hmi to drive without plc

[@ajmalaja9888]

hello sir, i need one clarification difference between ramp on & off and acceleration & deceleration time also kindly share details about holding brake and dynamic braking resistor

[@Ryan-dv8wm]

For me the ramp on and the acceleration is the same things... The ramp on is the term designating the acceleration curve of the motor

[@phuocang2828]

Please do with the s120

[@anything_can_happen79]

Hello, I have a problem I hope you would help me with it, I have TIA Portal v13, when I installed Startdrive optional, the commissioning wizard is not available, it says (no communication), what is the problem? Thank you in advance.

[@ramzi92100]

Me too i have the same problem, so if you have find the solution please share it with me

[@anything_can_happen79]

@@ramzi92100 I haven't found a solution yet, if you find one please share it hhhh (I think that with tia portal v13 the drive must be connected and the commissioning is done online "just an idea") but offline without a drive being present I still have the same problem.

[@Sh_Firouz]

🙏🙏🙏🙏

[@sametpnarl8939]

hi plz can u make 2 sycronize servo motor master and slave with gearing comment. your video very useful and u explain evey point because ı want that plz continue siemens videos .plz make gearing or sent me a video or documantation but ı prefer from u a video series about some servo videos esspecially sycronize programs .plzzz

[@jasimnc7056]

can i get your mail i d for small doubt regarding g 120x drive

[@patrickneumann7595]

First

[@hegamurl7434]

You win the internet... I guess^^

[@andyleather3014]

cant register as uk not an option boooooo