TIA Portal V15.1 Uploading/Downloading program from PLC S7-300 model CPU315-2DP

Hello KZbinrs and Programmers,
Today I have one video for show and share about TIA Portal V15.1 Uploading/Downloading program from PLC S7-300 model CPU315-2DP explanation & test.
In this video everyone will understand about how to use software
TIA version 15.1 TIA Portal V15.1 Uploading/downloading program from PLC S7-300 model CPU315-2DP with IO modules.
If everyone have any questions please kindly comment under my videos or contact me by:
/ plc.scada.7564
Thanks you so much for watching my video.
Please like share and subscribe my video also to get new notification and new videos.
Good luck for everyone!
See you next videos.

[@juanvictorinocastillocontr4964]

Thanks for help us !!

[@generaltechnologyknowledge5165]

Dear sir, You are very welcome!

[@ranjanjyoti003]

Thank you dear

[@ferdioflaz2956]

Tank you hocam

[@generaltechnologyknowledge5165]

Thanks you sir

[@gowthampavanaskar1889]

Hi, I have a question. I have a PLC which is in run mode, in online i have some some program modifications. In order to download the modifications to controller do i need to stop the PLC? Or while In CPU in Run mode can j download the program modifications? Pls reply!

[@longngo2418]

Thanks for usefully video. I have problem with PLC 314 2PN/DP. I use profinet comunicate with PLC, but cannot upload program block from PLC. On the TIA(Ver.17) portal was presented massage "aborted upload...", "the hardware configuration was crated and downloaded incompatible". Can you get me some advises to resolve this problem. Thanks bro.

[@generaltechnologyknowledge5165]

Dear sir, Thanks you! I thinks if the PLC downloaded with with full project then we can upload program from CPU. Please try to upload program other PLC to make sure that the software TIA portal install properly or not then we can know that what is the root cause.

[@marcellonoguera7305]

Greetings, I have a problem, I have downloaded many versions of step 7 and tia portal and I cannot open OB1 as you show it in the video, I have made the backups just like the videos but I cannot open OB1 to view it, I need a please help

[@jasonjesmislang8929]

Hi Can you make video how to backup program for s7-1200 using TIA V13. Using profinet.

[@generaltechnologyknowledge5165]

Dear sir, I have only S7-1500 hardware, but the procedure about how to back up is the same way. Let me prepare it. Thanks

[@wabalep.m8416]

This is only plc upload , how to total including pc station or HMI backup..?

[@julianramirez7010]

Hello, I have a question. If the PLC is in Run mode and the process that the PLC controls is running, can the upload be done? Or do you have to stop the process that the PLC is doing in order to perform the upload? I am not sure if the PLC, when doing the Upload, sends the CPU to Stop mode and then to Run mode.

[@generaltechnologyknowledge5165]

Dear sir, For upload no need to stop PLCs, we can upload program from CPU without stop PLC. Thanks!

[@user-kb6rq6gb1j]

CPU315-2DP firmware version?

[@generaltechnologyknowledge5165]

I used CPU firmware 3.3 krup P!

[@arijitmondal1993]

How to download a new whole program.

[@generaltechnologyknowledge5165]

Dear sir, We can do it by create the new project then configure the software on TIA project to be the same as hardware of PLC then we can click download. Thanks!