I'm a welder fabricator in the UK 🇬🇧 I've been doing this for 17 years now! I was 17 years old when I first started weld fabricating and these types of videos weren't around when I first started out!!! I love the way you pass your knowledge on to the new generation that are starting out in this field!! I always found that the older guys never wanted to share their knowledge with the young up coming welders because knowledge is power to them!..... I also share everything I've ever learned with anyone that's wanting to learn the trade, when I'm dead and gone my knowledge will live on
@McElhinney659 жыл бұрын
Jody, you were born to weld, you were also born to teach. Your videos are my inspiration.
@wheelcaredispatch705 жыл бұрын
Nice
@VoltageLP3 жыл бұрын
Dude even knows the rest of the world is on 50hz mains, that's pretty rare =) BTW, 220V mains makes a big (positive) difference in welding too, a lot of the cheap cheap welders are 220 only, cause it's cheaper and easier to make than making one for 110V
@danielriddell48473 жыл бұрын
M
@jaketank321710 жыл бұрын
I have welded MIG and Stick for many years. I am now trying to learn more about TIG and desperately need this information. I am looking forward to this series. I plan to purchase a new TIG machine soon. I encourage anyone interested in welding to visit the weldmongerstore store as I did a few months ago. I am very glad I purchased the MEGA Bundle a few months ago, my fingers don't burn now! After watching the many hours that Jody has provided, my welding skills have improved 100%.
@CraigHollabaugh3 жыл бұрын
Jody, I fired up my new TIG welder this afternoon, played around with settings and ran about 20 2" strips alternating hands as you suggested. Moving on to your next suggestion in a couple days. Thanks teach!
@tedbastwock38107 күн бұрын
Watching and learning 10 years later ( almost to the day! ) ... amazing how much has changed ... amazing how much is the same
@kevinsnider35596 жыл бұрын
Taking my first weld test after graduating from Georgia Trade School. It was awesome getting to meet you at the open house! Your videos still help me so much!
@zeroDOTjon10 жыл бұрын
I just ordered a tig finger and left a comment on the order - I hope you get a chance to read it. I just wanted to say thank you again for teaching me so much. Like I said I only mig and only on aluminum and copper but I watch every video you post. I figure the more I know, the better. Thanks again.
@weldingtipsandtricks10 жыл бұрын
thanks very much, i will look for the comment
@aaronpepper732910 жыл бұрын
Haven't done tig since I got out of school 3 years ago and to make matters worse thin stuff. But I've been a follower of your videos for awhile now and I think you may have been the sole reason I passed a test today. Anyway you can consider some big fingers sold.
@GregsGarage8 жыл бұрын
Finally getting ready to jump into the world of Tig welding. Your vids are in-valuable Jody. Thanks!
@Wrecked_em6910 жыл бұрын
As a journeyman Ironworker, we predominantly use stick welding. We are usually outside...duh! We occasionally cross-over with the Boilermakers & vice-versa. As welders, each of us are credited with being best in our field. "Open for discussion", as always. You have just managed to tie the two together in ONE video! Hard to do. I feel more confidence trying TIG now as I'm sure someone else would feel more confident trying arc now. That's what I feel your vids bring to the table. Allowing everyone to weld whatever or whichever they want. Obviously, based on skills. Your vids speak to ALL skill levels though. Great job! Thank you! Recent proud owner of a few tig fingers as well. High quality item & a recommended item for every welder as well. No compensation here...just good advice for fellow burners.
@tacticoolfuddery64975 жыл бұрын
Local 5 brotha
@brandysigmon90669 жыл бұрын
Probably the most informative welding video that I have ever seen, especially here on youtube. A very talented and intelligent man. Thank you. I just subscribed!
@paulmesser63998 жыл бұрын
I'm about to start going to school for welding, this was a big help.
9 жыл бұрын
I've welded for years, and was privileged to tig for two of those. My tig experience was limited to mild steel. While I got some schooling on aluminum, I've never really gotten any on the job experience. I've been medically retired now and am not able to do much welding anymore. Physically I can, I just don't run into many occasions to do it. I would like to thank you for these videos. They're quite informative, and it's just really nice to see a real expert at the craft. I would appreciate a different way to contact you and get some info on equipment and supplies you've used on some of these videos. Thank you.
@thomasmastersen37093 жыл бұрын
I am inspired and dedicated to adopting the techniques you use to weld in sly and all processes, especially TIG. I just got a machine that does it all and regularly turn on your channel to learn more and more. Your a true master!!
@libertyordeath12873 жыл бұрын
I've never tig welded but expect my machine to be in this week. I've watched your videos for years and have mainly mig welded with occasional arc mixed in. Tig welding has always been something I've wanted to learn. Before I even ordered the machine I ordered your tig finger set. Keep up the awesome informative videos.
@Kris.Janowski3 жыл бұрын
Such an excellent video - learned so many things all in one place that I can directly apply to all the different sorts of projects I have simultaneously planned to do. I've been going from one video to the next to the next trying to acquire all the knowledge I need but this just got me going so well straight off the bat. Great job mate you're a legend!
@InvincibleExtremes9 жыл бұрын
Thanks for the videos, i've welded for YEARS using a shitty flux core $90 welder, but since it was moslty sheet metal and gunsmithing projects i wasn't a big deal. Now that i want to build stainless turbo headers for my 68 firebird so i want to learn to tig weld. Your videos are very informative.
@shelbybailey80007 жыл бұрын
You make it look so easy lol I wish you were my teacher in my welding school. Well actually you are my teacher. I learn more from your videos than I do at my school. Thanks again Jody and I hope one day I well be a bad ass master welder/fabricator like you
@420Khatz8 жыл бұрын
Welding is so beautiful like art... Thank you for these videos.
@dougalan56145 жыл бұрын
I've watched hundreds of welding videos, and I always end up back here. Your arc shots are fantastic. I like the occasional obvious edits. They remind me of Max Headroom.
@timadams50464 жыл бұрын
Max was a welder too, had to modify his vehicles for his big head to give him.... well, you know.
@larrychristopher91473 жыл бұрын
Have watched many of your videos over and over. Have lincoln 210MP and 200 square wave for a.c. tig. Appreciate your info and will be buying off your site. Wish you gave classes.
@BranManFL3 жыл бұрын
Best overview for the tig operation I have ever seen. Great close shots over and over. Extremely helpful. Well done sir. Your welding is superb.
@ltloo34368 жыл бұрын
Jody you're just awesome. Wonder how newbies of welding world would do without you! :D
@Str8sixfan7 жыл бұрын
Jody, I'm finally buying an argon bottle so I can use the TIG function of my Everlast 206Pi. I'm excited, to start learning. Will likely be buying a tig finger soon!
@tothepoint42403 жыл бұрын
Hey man, i just gotta give u big props for all of your videos. Their awesome quality, pleasent to watch and of course, packed with knowledge...all for free! Not some corny ameture made slideshow with a longass intro and lameass effects that blowout my speakers. Im just a young dood but i gotta say keep it up!
@pierresgarage268710 жыл бұрын
Hi Jody, I'm blessed with an excellent TIG machine, happy with the fact you use some of those to make the videos. Looking forward to the series I'm sure to catch some new material to keep improving my skills. And truly those TIG Fingers are a must in a welding shop...! Thanks, Pierre
@jolujo58426 жыл бұрын
Your attention to detail is much appreciated.
@walidtwebi7794 жыл бұрын
Jody I am from Libya, and your videos are my favorite. 👍👍
@rcandfitness38125 жыл бұрын
9:08 "when im hhhwhoopin on somethin" my favorite part of the videoo. You the mmman Mr Jody..
@mskarenloreilly9 жыл бұрын
Great idea making these videos ... BTW, I'm a pressure vessel welder, boilermaker and PhD student (researching trade education)!
@garrettmichael38134 жыл бұрын
"I don't want a hammer head flyin' through the shop when I'm whoopin' on sumthin" lol
@dominicluck973 жыл бұрын
Easily best welding channel,Thank you for so much knowledge
@creast569 жыл бұрын
Only just subscribed. This video was very very informative. I have done the occasional Tig weld using facilities at work but never achieved the weld beads like yours. I am inspired to practice now!
@ArnoldsDesign10 жыл бұрын
I wish you had a book written on this. I'd buy if for a reference when I get into frustrating situations when I'm fabricating or doing repairs.
@motecalevol10 жыл бұрын
I wish I had subscribed to your videos before I bought my welders. . .I have (3). My first machine is a decent 80 amp Century flux core. I then got a good deal on a used Miller EconoTig 180 and I also bought a 110V 100 Amp Lincoln MIG machine which I spent a fortune on converting from flux core to MIG. Anyway, I wish I had spent my money on machine(s) with some of the more advanced features. Just a word of advice to newbies. I have found over the years that the price buying replacements for cheap tools (including welders) is far more than buying the right thing in the first place. All that aside. . .my question is regarding frequency and TIG welding Aluminum. My EconoTIG is an AC/DC transformer machine, so I assume it is always at 60 Hz. I welded a broken Aluminum golf cart frame once with decent results. The weld is plenty strong, but I could not get it to clean properly - it did not look very good when I finished. You just welded some aluminum at 50 Hz (which is LOW frequency). Everyone tells me that I need high frequency to weld aluminum. The owner's manual on the EconoTIG doesn't give any specifications as to the frequency being "high". It reads: "AC output for superior aluminum welding" and "Built-in arc assist stabilizer for AC TIG on aluminum". I don't do a lot of Aluminum welding. But, I'd like to know what limitations I will face using this machine and what the deal really is about the frequency needed for Aluminum TIG welding.
@bluehornet67527 жыл бұрын
Great video Jody--I was so into it that I wore my TIG Finger while watching it! ;)
@welditup95596 жыл бұрын
Tom B hopeully on your finger
@JamesGMunn10 жыл бұрын
Good stuff! How about some really basic stuff about welding tip #1, get a good fit-up? Tools, chop saws, band saws, grinders, methods, plate, tubing, pipe, square/rectangular tubing miter/butt etc. Maybe this would be a whole different series? A lot of videos are like the cooking shows where everything is already perfectly chopped and ready to go and no one covers all that "boring" preparation work that new people need to learn how to do in order to be able to do what was shown.
@jayphilipwilliams9 жыл бұрын
Yes!
@gregsmetalworks10 жыл бұрын
Thanks for the great video Jody. Been a welder for many years and learn something from your vids every time I watch. Love the big and little tig fingers. Could you go over tungsten size and selection of different tungsten choices relative to what jobs or materials your going to weld? (Stainless, mild steel, aluminum, magnesium, titanium) Collets needed and any other helpful info you throw in for good measure.
@EddieTheGrouch10 жыл бұрын
This was my question also. I am always burning up tunstens. Tungsten sizing, cup sizing, flow rates and current levels.
@samuelclark452510 жыл бұрын
I'm pretty much still a noob at welding. I've welded some mild steel after getting my powertig welder and have only used one size tungsten and one size cup. I know I need to go up a size on tungsten for higher amps and bigger cups for larger coverage but that's it. Some help on this would be great when I move up to aluminum.
@DirtBagMcGee110 жыл бұрын
My default (I am using an inverter machine) is a large gas lens collet body, using either a #7 or 8 gas lens , a 2% lanthanated tungsten (I switched from 1.5% after some trial and error) . For 25 up to 160 amps I use a 3/32. I find this is my default set up for 90% of what I weld.
@justinverbaux647410 жыл бұрын
Shan Beckstead Since buying my inverter welder (Everlast 250ex right after Jody's review - Thanks Jody) I've played around with a bunch of tungsten and cups and came up with pretty much what you have. I use 3/32 for 90% of my welding.
@DirtBagMcGee110 жыл бұрын
It works, I have used 1/16th on occasion for super thin gauge stainless. In most cases in dealing with aluminum any thicker than 1/4" I use a 1/8'' as I tend to run around 200 amps and prefer the bead profile Vs a smaller tungsten. I will say that I almost always run a gas lens type collet as they simply produce a better weld.
@XsafetypunkX5 жыл бұрын
As always, a great video! Thanks for putting all your knowledge out there for us rabble to learn off!
@ozyrob17 жыл бұрын
Thanks for your great vids Jody. They are an amazing recourse.
@BooHiss568 жыл бұрын
I work in bronze sculpture - but I'm an 'apprentice' - there are no apprenticeships in this field.. Your videos are thorough but no videos explain the delicacy of tig on bronze (being such a soft metal and sometimes I'm welding a 3mm finger back onto a hand) .I feel that you have the understanding of the tool that could illuminate the delicate work involved in sculpture. Do you have experience w bronze sculpture or would you please work on one. So you could share your massive welding experience w us learning to get bronze sculptures right. I think if you worked on one you would have a lot too share. This is one of those rare trades where we don't have apprenticeships and there is little too No videos online. My boss is busy and I want to keep my very rare position in this trade. It is very different from structural welding - we have to be able to adapt to the thickness and texture of the piece. It takes all the different techniques at once. I'm doing my best learning on the job but I think you have a way of speaking principles that my boss who has been running a bronze sculpture foundry for 20 years may lack - because we are always under pressure to make a crust and he now works intuitively . I CHALLENGE TOO YOU TO TIG WELD A PROBLEM BRONZE SCULPTURE AND TEACH US WHAT YOU LEARN. I've No Doubt you would have interesting solutions. I also think you would have fun with the task. I'd love too be able too learn from what you find. Sean , Melbourne , Australia.
@ks-lv7vv5 жыл бұрын
send him him material
@nicklambing926810 жыл бұрын
Jody, We are a farm operation and have a very large Miller welder that we weld nearly every way with. Recently, we have needed to repair aluminum irrigation pipe that is at least 50 years old. Our attempts at using tig were a complete flop. The video today touched on cleaning action and the light bulb went off in my head. I am almost positive after watching the video that our machine is not capable of making the needed adjustments for affective cleaning action. If you could emphasize the cleaning action involved in welding aluminum when those situations come up. We may need to purchase a nice portable, tig capable, welding machine that is able to make the adjustments necessary. Our present, very large and heavy unit presented us some problems in the voltage settings also. The lowest voltage setting was ten, when we may have been better off at a lower voltage. Really enjoy your videos. Our shop is all tig finger equipped. Nick L
@jacksonyoung975110 жыл бұрын
Clean is the key to tig welding. Old aluminum that has been exposed to the elements will need to be cleaned thoroughly. For portable use you should be looking at inverter welders. My portable setup is an Everlast inverter AC tig welder. The AC will give you the cleaning action and you'll need to set the balance. Miller has inverter models too but are pricier. Good luck
@nicklambing926810 жыл бұрын
Jackson Young Thank you much for your input. We have come to realize that we are probably asking too much of our big Miller (very stationary) welder. According to the owners manual it is capable of nearly all types of welding provided you supply the correct add on equipment. We have burned tons of stick rod over the years and have been very pleased with the results. By acquiring a wire feed unit we have had good outcomes until the wire feed apparatus died, Recently after watching Jody's videos we have acquired a gas bottle with flow regulator and the hose and torch assemblies. Our attempts at tig welding mild steel have gone very well, but our attempts at making weld repairs on the old aluminum pipe have gotten the best of us. We have done the surface prep. with stainless brushes, but have not been able to clean the inside of the pipe. Both surfaces have been contaminated by the water and environmental elements. The pipe wall thickness is right at 1/32 so things need to go just right or we have more holes than repairs and if we don't burn through the heated area (welded area) appears very rough and/or has a pin prick surface appearance. Have been unable to determine if it is possible to make cleaning adjustments like Jody has demonstrated so well with the portable units being used in the videos. The time has come to acquire a new welding machine.. Nick L..
@martinjoseph702910 жыл бұрын
I really like that Everlast 160 inverter welder and am wondering if you will be creating any more videos on it. I really like the fact it has a built in solenoid for turning on and off the argon and the size of the welder itself. I really enjoyed this video and look forward to seeing the next part.
@agib24510 жыл бұрын
Well explained Sir, you never cease to amaze. Please keep up the good work. I highly praise the TIG finger and would recommend the purchase of one, if not two. Thanks again and keep up the excellent informative work.
@KF7P10 жыл бұрын
Hi Jody, love all your videos, all well done! I would love to see a segment on an upcoming video specifically on TIG'ing aluminum....things to do to get started right, and common mistakes people make.
@levonluther949410 жыл бұрын
Hi Jody, I recently purchased an Everlast 250EX, primarily from what I saw you do with it on the Welding lathe adjusting the parameters while still being 1000+ cheaper than an equivalent Miller or Lincoln. One thing I would like to see in future episodes if time permits is show what combination of settings allowed you to utilize the "manual pulse" like you did at 13:45 in this video. I am not sure if there is a rule of thumb as to what percentage of your weld amps just be there, but 33% did not work for me on that application, I would lose my arc. Definitely subscribed for the future videos.
@GeorgiaOutlaw19917 жыл бұрын
in school for welding now. I can't wait til I'm doing the hands on. inspired me a lot, cause I honestly chose welding just for the money... great vid man. subscribed.
@oleskeide49383 жыл бұрын
N nånnnn
@oleskeide49383 жыл бұрын
Ån n.
@oleskeide49383 жыл бұрын
Ø l nmm m nlnøm. Æn øl. Æn. Mømåmn n om. N
@oleskeide49383 жыл бұрын
LP men m. Mo. L l ø m å ø nlnplln nl p np. L lønn
@oleskeide49383 жыл бұрын
Lønn mål n ø. Oøllnnn mnk åncplå nnmøplm
@vcval10 жыл бұрын
hi there and thank you for explaining, about tig, , ive never welded tig before, i just ordered a MIG TIG MMA 3 IN 1 Welder Inverter 220Amp , just watching some videos before it turns up it has been a long time since i have welded, , will mainly be using mig but i thought to have tig ( i think scratch) would maybe come in handy one day
@2tephenson8 жыл бұрын
I gotta buy one of those fingers man. learning tig and the pinkys getting crispy.
@jahirulislam30135 жыл бұрын
You awesome mate. I Appreciate you for all the efforts you put in. A big thank you.
@Jasonsfarm2 жыл бұрын
We heard about you at Army BCT...Jody. Seriously though, thank you for sharing your knowledge!
@kennethmabus381 Жыл бұрын
Best tip in the video 18:30> Thanks for sharing. Great on visuals! Smart to the point explanation.
@erik6180110 жыл бұрын
You're like an ocean of knowledge with the experience of sand.
@x9x9x9x9x910 жыл бұрын
I did some flux core the other day for the first time and I loved it. The simplicity of it was amazing but damn it was hot. I still have yet to do TIG. I think I was supposed to start it tonight in my class but my class was canceled for some reason.
@BruteEngine10 жыл бұрын
Thank you so much for making all your videos! Awesome work!
@STohme5 жыл бұрын
Very interesting and very instructive video. Many thanks for all your effort.
@irgtk10 жыл бұрын
Just what I was looking for in a TIG series. I would like see everything from setting up a TIG machine out of the box to when to change the tungsten, what kind of tungsten for the metal to be welded. Thanks
@clattfamilyracing7 жыл бұрын
would love to see you touch on engine drive welders doing TIG, like the vantage 300, trailblazer and so forth
@joelyboyblue10 жыл бұрын
Jody is Kickass, he is a Welding Guru- Learn From Him! I'm looking forward to the TIG series! But The TIG Finger & ForgetWelding School Just Buy his DVD!
@stevefriedlander70537 жыл бұрын
One of the best TIG videos! I'm taking a TIG class now (67 yr old Disabled Veteran). Looking to buy now. Can you recommend an Ac/DC HF machine with good AC balance for Aluminum and a Flex head torch with good foot pedal. Mostly will be doing metal art, but also other projects. Prefer to stay under $1200for machine. Already using XL TIG finger. I like it , but it frayed easily.
@jeremydoblinger36097 жыл бұрын
Steve Friedlander ever last 211si its a mts machine that rock's!!check it out
@billdlv10 жыл бұрын
You're off to a great start there is a lot to cover. Maybe metal prep (can't be clean enough), filler metal selection (repairs, SS, cast AL, general use for steel, AL, SS). Ex for CRS use ER70S6 or for aluminum 6061-T6 and 4043 filler. I don't know like I said lot to cover...good stuff thank you for the video(s).
@gh0stmast3r10 жыл бұрын
hey loving the videos, i'm learning more about welding here than i am anywhere else, i have a wirefed welder that is capable of being turned into a mig welder, what i want to know is should i do this or just buy another mig or tig welder and keep this one around as a trophy?
@muxlowshauna7 жыл бұрын
First of all I just wanted to say, your videos ROCK and the dedication to your viewers is most greatly appreciated! Thank you 😊 I am just getting into welding and am pretty geeked about learning more about TIG welding. I've used a MIG welder a couple times but find myself fascinated with TIG... With safety being my number 1 concern,what would you suggest for a women's lightweight helmet?
@PANTYEATR110 жыл бұрын
amazing video as usual Jody, thanks for that. my question is how close is your tungsten to the puddle when doing TIG in AC and DC current? it looks like you are actually touching the puddle, but we all know if it was touching it would be smoked! that's my biggest problem, I get as close as I can to the work material, but if I add rod, I run the risk of smoking the tungsten. thanks in advance, jefferson
@weldingtipsandtricks10 жыл бұрын
I typically hold a longer arc on AC aluminum than I would on steel. Just because steel is more forgiving if/when you dip your wick. Also, torch angle makes a lot of difference and can fool you . when you lean the torch back too much, the electrode can be really close to the puddle where the taper stops. The tip can look like its not too close, you add wire , the puddle rises, and before you know it you sputter.
@PANTYEATR110 жыл бұрын
thanks for the tip Jody.
@youtubasoarus10 жыл бұрын
Awesome videos. I hope to save up some money so I can buy a decent setup and get into welding. These videos help keep me motivated to save up. Thanks man. :)
@blech719 жыл бұрын
Jodi, great job as always! Viewers can pick up so much in addition to your narrative by watching your examples. Good stuff! One question, I worked government construction when I was younger and witnessed something they called Orbital. It was a machine but seems there wasn't any electrode and the welds often failed. I thought maybe since they weren't flush and material could get caught in the depresses ion on the inside of the pipes. Does this method still exist and is that why they pass/fail? Didn't seem like the pipes were load bearing just had material passing through them.
@brentsmith56477 ай бұрын
A brilliant gentleman thank you 👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@SuperDachshund9 жыл бұрын
Cool! Thanks for the numerous up close welding shots. Gives me a better idea of your technique.
@thatlittleworkshop10 жыл бұрын
I do a few cast iron and cast steel repairs every year, mostly for farmers on older or antique farm equipment. For most of them I generally braze using oxyacetylene, but I was wondering if tig brazing with aluminum bronze or silicon bronze would work as well. Also what would be the best procedure for this process. As I also do the machining, I can fix any boo boo's from either end lol. Thank in advance, and I'm am looking forward to the rest of this series. Ian Little
@vernhood456810 жыл бұрын
I recently seen a post on HF interference. They said to eliminate the "noise" twist tie the first couple feet of your ground cable and the torch cable together. They also stated that it would help focus the arc. What are your thoughts on this? In my profession I see twisted pairs of wires to reduce "noise" on computer wires and the theory makes sense. Look forward to the videos every week :)
@shenyathewelder96953 жыл бұрын
I think I’ll braze a bronze pad to the front of my hammers instead of using all that argon, but I have tried your method with a sledgehammer and it worked beautifully
@Outsailing9 жыл бұрын
Great videos Jody !! , could you talk a little more about prepping rust steel and other used metals
@codypugh44128 жыл бұрын
awesome video, I'm new to welding but I noticed in some situations you leave the filler rod in one spot and weld over it, and in others I see you tapping like how I was taught. is there a reason you do it like that or is it just a different technic?
@KristianPKristianpipes8 жыл бұрын
If you accidentally get your tig finger messed up with oil or other dirt , is there a good way to wash it or clean it. with out damage it. Great watching your channel.
@poopypantz10 жыл бұрын
Hey buddy, great video as usual. So... I too think it might be helpful for some expansion on the cup/tungsten selection. However, any more info you can give about problems that may come up with different materials would be great. Example: aluminum, etc. Maybe show some exotics? Copper welding is fun, maybe some chromium alloys? Keep it up brother.
@sledsports3 жыл бұрын
I will always buy from weldmonger.
@Jomb310 жыл бұрын
Nice video! I was wondering do you use Kemppi welding machines in US? They are pretty damn good machines. Basically every company in Finland uses them.
@jesusalvarez55634 жыл бұрын
Miller, lincoln and esab
@PeakyBlinder3 жыл бұрын
Thanks for a very nice put together vid, Awesome job sir.
@wallbawden55113 жыл бұрын
With your shop here in Australia as yet and believe me I have been looking things like your TIG FINGER you just can’t buy and some of the other products are not realy available so do you send things through mail E C T I am enjoying your tips and tricks videos and am learning a lot I have done quite a lot of MiG / STICK and braising so TIG is a new ball park for me
@y_o24559 жыл бұрын
That weld at 4:30ish looks phenomenal
@geraldpaul187010 жыл бұрын
Hey I want to start of by say I love this video your very detail and informative about welding thank you for this but my question is I have never weld anything before and I have a 71 Monte Carlo that need the bottom of the trunk replace so as a first timer on welding which on of the welding machine would you recommend for the price for a first timer like me
@bertyadventures4 жыл бұрын
I am a Tig welder and i just bought a tig finger today
@paulhendrix85998 жыл бұрын
Hey! Your mention of the TIG Finger is no problem! I am very glad to hear about a useful product you created. The mention of it was by no means obtrusive in any way. (the joke about your wife was) Over all I liked your video and learned something.
@TheTacticalToxin10 жыл бұрын
When it comes to walking the cup how does tungsten stick out and cup size effect the puddle? Thanks love the videos
@shadowfox92910 жыл бұрын
I am just starting out TIG welding. I have been following your channel for some time now and been trying some of your teachings. One big problem I have is rounding over the tip. Is this normal or am I holding too close to the work? I have benefited greatly from your MIG videos and am hoping to do the same here. Thanks for the great videos.......Dave
@coopergrimes51502 жыл бұрын
I love your weldmonger stick weldin gloves
@brentsmith56477 ай бұрын
I learn a lot watching the gentleman's videos thank you very much 👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@Kurst53510 жыл бұрын
Hey jodi,My name is Joel, thanks for all your tips they have really helped my career out in getting me to the position I am in right now....however one thing I have noticed you've never really touched basis on is porosity in tig welding caused by different things such as no gas coverage, contaminated wire/tungsten, etc. It would help me and others as well to maybe get your expertise on this and how to best prevent this. I'm currently about to take a 6G test on 2 inch, 3/4 thick carbon steel with a er70s-2 root pass and e7018 fill and cap. I have been struggling with porosity Pete as they call it. Any tips would be appreciated. Thanks.
@Bastardsword019 жыл бұрын
Question. I noticed that you were wearing a ring when you're not having any gloves on (obviously!). Our welding instructor warns us about wearing metal while welding, such as ring and long necklases (chains). Do you remove your ring while welding? Oh, and btw, I like how informative you are about your different welds.
@Tony62420089 жыл бұрын
Hey Jody (hope I spelled that right), fellow welder here. Machine building/ aerospace/ pressure vessels/ etc.... I've never tried it but can you use nitrogen as a shielding gas for tig or mig?? I know it's typically used as purging for brazing refrigerant lines. Do you know the reaction it will have on the arc? Maybe future video? You do a great job brother, big fan. Thanks a million -Tony
@crosstalk7110 жыл бұрын
Jody, great videos! What advice or can you do a video on some good tips on Tig welding (scratch start) when the metals have a drastic difference in thicknesses? Thanks
@buildsomethin10 жыл бұрын
Great video as always Jody. One question that I would like to have answered or explained is the use of very small electrodes such as .040" or smaller. Where would they be used, why use them and how to use them. Cheers Richard
@myppnu10 жыл бұрын
Hi Jody. Another great video. I'm looking forward to watch this series. * I'd like to know more about prepping the material before doing the welding. Luck favors the prepared... :) * I'd like to know more about welding tubing in stainless steel. * I'd like to know about welder settings for welding different types of materials.
@DanielWisehart10 жыл бұрын
I am interested in how you TIG weld experimental aircraft tubing when there are several tubes that come together. It takes a fair bit of work to get a good fit-up. It is then a disappointment if I then blow a hole in one of the tubes. Thanks for the videos!
@andrewwilliams83655 жыл бұрын
Hi. I am a self taught welder and I just bought a tig welder. I've got a questing about ''rule 33''. What is background? Or do you tell about it in another video. I'm working my way through your videos so if you tell about this later on no reply is necessary. Thank you for what you do here. You can thank AvE & This Old Tony for sending me your way.
@ericson26savannah869 жыл бұрын
I dont have the stediest hand for tig welding (blind as well double cheeters in the helmet) so I choke up on my torch it gets hot and very hard to hold for long. Have you thought about a tig finger wrap for the torch. and yes I do have a tig finger its helpful maybe the XL over the torch could help me. Im using a flex head air cooled #17 and a dual voltage HTP invertatig 221. Thanks in advance your vids have tought me plenty!
@TheDragontoast10 жыл бұрын
I just started to learn TIG and i have a Lincoln multiprosess welder with liftstart and it dont have footcontrol or adjustable torch and would like to learn more about heatcontrol and how to reduce distortion on thinner metals.
@EddieTheGrouch10 жыл бұрын
Great job, Jody, This is a fantastic video full of info. It's going into my favorites as a reference.
@Beek883 жыл бұрын
Nicely done sir! Thanks for your time
@johnhutchinson73068 жыл бұрын
I'm thinking of buying a Lincoln square wave 200 tig machine. Have you had any time on this machine and if so I'd like to hear your opinion on it. I love your videos. Welding for life. Thanks!