Tightening the Chassis of a Bugaboo Donkey

[@littlemamalife5037]

Thank you so much for this video! I thought my beloved buffalo was broken but my husband and I just watched your video and now it's all fixed! Xx

[@LilyAlmond]

Hi from Denmark! Is it possible to do a DIY fix when one of the side arms is broken near the part, that you tighten in this video?

[@rethinkraptors3075]

This is a fantastic channel! Will this fix help with the issue that our donkey sometimes unlocks itself (the wheel pairs folds in to each other the same way as when you fold it) when I heave to get it over an edge, liker up on a bus or on the sidewalk? its a b it annoying when both kids are sitting in it!

[@BarnevognverkstedNo]

It's worth a try, especially if the mechanism seems very loose (the disks are not tight against each other). Unfortunately though, the symptom you mention is usually a result of wear on the innermost disks (the portion of the central locking mechanism connected to the back frame) and requires the replacement of these parts.

[@keirenlewis7704]

Hi, I have tried doing this and my pram still feels loose. Could there be more damage on the inside with the mechanism

[@hannahc7000]

Hello, ive got a lot of movement and space between my disks and tried to tighten the screws but they wont budge at all! Any tips/tricks its a 2014 chassis :)

[@heather4930]

is this the same for a chameleon?

[@nefertitithomas9]

What type of glue should I use?

[@BarnevognverkstedNo]

regular super-glue works fine for this application :)

[@mathieuwilliams4203]

Hello the stroller workshop! I live in Sweden and I was wondering if you had a video or any help with Tightening the Chassis of a Bugaboo chameleon 3. The right side has become a bit loose. Thanks and do you have a email address or website? Thanks

[@BarnevognverkstedNo]

The Cameleon can't really be tightened unfortunately, just fixed when broken (no resistance at all on one side). If this is the case, check out this video: kzbin.info/www/bejne/r2G1aaCYic2rmdE

[@frenchie13]

this is awesome! my donkey is doing the same and actually I have a bigger issue. it appears to be a bit uneven, kind of leaving more to one side. it's weird I can't even really describe it. lol

[@BarnevognverkstedNo]

+boogie googie Check to make sure the handle is extended evenly on both sides. Check the points at which metal bars slot into plastic joints/mechanisms, if any are particularly loose, drill out the rivet and replace it with a screw that you can make super tight. If you're adventurous, disassemble the central mechanism, examine the various components for particular wear, oil and reassemble them (something might simply be misaligned). And if you're ever in Oslo, Norway, feel free to stop by :-)

[@stephaniesilcock4860]

boogie googie I know this is an old post but did tightening those part fix your problem? We have the same issue