How to Fix Mechanical Problems on Bugaboo Donkey / Buffalo Brakes

[@Eierschneider]

Thanks for taking the time to make this video! saved us from buying a new stroller all because of a little screw that got stuck in the break mechanism. Keep it up!

[@michielvanderros5768]

I was trying to fix the break for the second time, but thanks to your video I realized the problem might be on the other side. And it was spot on: No worn out plastic fortunately, but the first rivet you mention was completely missing. So I put one in there and the break is working like a charm again. On both wheels instead of one. Thanks!

[@christian7330]

Thank you, this is awesome and just about the only information out there on the brake mechanism! With our Donkey, that tiny screw you mention at 5:10 broke off at the head - for anyone wanting to replace it, it's a 3mm width / 8 mm length T10 screw, but I simply swapped it with a leftover M3x20mm screw after drilling out the broken one (requires a tiny 1mm drill / extractor). Also, I found that it's much easier to align the two brake sides if the Donkey is compressed into the mono configuration.

[@BarnevognverkstedNo]

Right on! Thanks for sharing :)

[@323hunnybunny]

3mm width / 8mm length T10 screw

[@leighamyskilton5105]

Thanks for the video, the left brake on our Buffalo wasn't working. On removing the first part a lot of debris had got in through the brake pin slot and fallen below it so it could not move down far enough. A quick clean and the brake is back in action. Well worth looking at yourself.

[@ty-liang]

Please can someone advise where I can buy replacement spare part of the rear wheel lock? The white locking block thing. Thanks in advance

[@BarnevognverkstedNo]

try contacting 'bugaboo repair guy', he 3d prints bugaboo parts :)