Tikka Bottom Metal Troubleshooting Tips

We received a video from a customer having issues with their Tikka T3x Billet Bottom Metal. After working hard to duplicate the issue remotely, we wanted to share the solution with everyone since this is a common Tikka issue.
************************
Mountain Tactical Online: www.mountainta...
Mountain Tactical on KZbin at / tikkashootersmt
Mountain Tactical on Rumble rumble.com/use...
Mountain Tactical on Facebook at / mountaintacticalcompany
Mountain Tactical on Instagram at / mountain.tactical
Comment below if we missed anything!
************************
Disclaimer:
Do not attempt any of the processes or procedures shown or described in this video or on this channel.
Do not attempt to repair or modify any firearms based on information found on this channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Mountain Tactical Company shall not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this channel or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this channel or in this video.
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.

[@gregb.6682]

Your informative guidance on reassembling the Tika has helped me become comfortable and confident with this awesome rifle. Thank you.

[@mountaintacticalcompany]

Thank you for the feedback! I remember how nervous I was the first time I took my rifle apart. My goal with this content is to give others confidence to take on these challenges. Your feedback helps a ton!

[@1valg]

Great video! This will no doubt help a lot of customers as well as your customer support. Win win 👍

[@mountaintacticalcompany]

Most definitely!

[@RandyMan388]

We all know Tikka rifles are great. Thanks for your videos always packed full of useful information. Take care.

[@mountaintacticalcompany]

We’re a little nuts about Tikkas, haha!

[@jamesmooney5348]

Great video! Thank you!

[@mountaintacticalcompany]

You are welcome!

[@richcotte]

Great information as always! I’ve made the mistake of not seating the lug a few times.

[@mountaintacticalcompany]

So have I. It’s actually too easy to do.

[@KenpInmd]

Thank you .. I have the exact same issue..

[@mountaintacticalcompany]

Let us know if this does not fix it.

[@bertcremers3134]

Big thanks to you, this makes sense, I also encounterd a problem with my Tikka T3X CTR regarding the recoil luggs when changing the factory stock to a GRS Bifrost. Also hate the rattling steel magazine when hunting, can't replace this cause no other magazine fits besides Tikka's own 😤

[@mountaintacticalcompany]

How do you like the Bifrost? A thin layer of masking tape will get rid of the rattle without causing any issues

[@bertcremers3134]

@@mountaintacticalcompany Hi there, thanks for the tip, I will try that. I like the stock a lot, it is a heavy bulky set but verry stable. I like to stalk a lot and always use shooting sticks. I also have the Berserk for .223 (Bifrost for 308). Friend of mine has a lot of trouble with GRS and got rid of them (several cracked aluminium stocks with Blaser .338 LM). Again thanks for your fast response.

[@mountaintacticalcompany]

We only had issues with two laminate stocks. I have two Bolthorns and have mixed feelings about them. The Berserk is one of the best values in my opinion. I haven’t shot the Bifrost, but it has my eye!

[@rosscarlson7178]

Thank you sir, much appreciated!

[@mountaintacticalcompany]

Very welcome!

[@johnandrosemarywyatt977]

Excellent......as usual

[@mountaintacticalcompany]

Thank you! Cheers!

[@wrigman]

I have the same issue with your gen2 aluminum magazine in my new T3x. I will try your suggestions and hope it works. I have a cnc machined bottom metal. It’s not yours, but the one from Oregon. My stock mags work well with this bottom metal.

[@mountaintacticalcompany]

The bottom metal does not hold the magazine in the rifle, the magazine retention spring does. Make sure that is in spec since the rigidity of the aluminum requires everything to be in spec.

[@wrigman]

@@mountaintacticalcompany the rifle is going on the Vice right now………. Get back to you when I get done.

[@mountaintacticalcompany]

Contact the shop directly. We cannot gunsmith over KZbin.

[@wrigman]

OK, the retention spring in the back WAS slightly out of speck. Don’t know how, I never touched the screw that holds the trigger and spring. I did loosen it up and pulled the spring as far out as I could. I held it straight with a paper of soft jaw pliers as I tightened the screw. I’m still having the same problem with the mag. Don’t know why, but will get one of your bottom metals when they become available. The bottom medal from Oregon mountain rifles had to be shimmed at the front screw. Don’t like that I had to do that to get it to work with stock mags. Hope after that your mag will work……..

[@mountaintacticalcompany]

Strange that the bottom metal had to be shimmed…. The tolerance between the action and where the catch hooks into the notch on the action is tight. This is where most manufacturers mess up stocks or bottom metal. Does everything work with the factory bottom metal?

[@michaeldoyle5001]

Thanks for this! I found out that I didn't put my T3X back together properly. When will the single shot loading device be back in stock?

[@mountaintacticalcompany]

I am glad this helped! Sleds are waiting on molds. As soon as we have the molds, they will be back in stock very quickly.

[@rosalindstewart7013]

Thanks buddy ✌️

[@mountaintacticalcompany]

Any time!

[@CPM_1975]

Do you ship to Canada? I have two rifles T3x Widelands 300wsm and a Super Varmit 300 win mag? Very informative video! Thanks, and have a great day!

[@mountaintacticalcompany]

We have a direct ship parts on our site. As long as you are not using a VPN, you’ll see what we can ship directly. Corlane’s and Calgary Shooting Center carry all our products in Canada

[@MTCKIE68]

Damn, Brother, where have you been ? Something I would like to see is a magazine adjustment to get them perfect for feeding and everything.

[@mountaintacticalcompany]

Volleyball camps with the daughter. We have a magazine trouble shooting video from last year. Covers most of what can keep them feeding great.

[@MTCKIE68]

@@mountaintacticalcompany I hear that Brother ! Maybe she'll be in the Olympics one day. 🙏

[@mountaintacticalcompany]

That would be epic!

[@MTCKIE68]

@@mountaintacticalcompany It's up to her, if she wants it bad enough she'll get there.

[@MTCKIE68]

​@mountaintacticalcompany Hey, I want to be clear about the magazine comment. I was talking about a like the Rimx that's got a tab for adjusting the magazine to be exact for every rifle. But it's best for the chassis that have the magazine adjustment for dead nuts control.

[@pawpaw2361]

It’s plastic no metal

[@mountaintacticalcompany]

We make ours out of metal. The one in the video is metal.

[@lmbear]

The Mountain Tactical bottom metal is made of aluminum, so it is "metal". They are an excellent upgrade to the the T3/T3x Tikka rifles. I love mine. it works flawlessly, as you would expect..

[@mountaintacticalcompany]

Thank you for your business!

[@phild9813]

Yeah I’m up to 3 of them. Huge improvement if for no other reason than consistency in torquing the action screws. The factory “metal” is useless for this.

[@mountaintacticalcompany]

Thank you!