Timber Frame Outdoor Movie Screen! // DIY Woodworking // How To

[@rjtumble]

OMG, Utz with a mask, that was awesome. He's got to be one of the most patient shop assistants ever.

[@leslieesparza4697]

Oh my gosh. I love Utzie so much!!! 9:20 - I'm dying. My baby (dog - Finley) is my woodshop partner and I've recently started wondering if I can get her some ear muffs and a little doggie mask. Utzie is so on top of it!

[@joeyleerobbins]

The fact that you can build anything with the crap lumber Lowes has, is a true testament to your skill.....awesome build!

[@ThirdCoastCraftsman]

Haha thanks man!

[@rschaefe1]

Glad to see Utz helping and good to see that he’s wearing a mask! Too funny.

[@ThirdCoastCraftsman]

Yea gotta try to keep his lunges safe too haha

[@timwegman5776]

Amazing job. You took something that is normally either ugly or not even seen and made it into a piece of art.

[@TheArtofCraftsmanship]

Awesome project brother! Beats PVC and duct tape. Props on the movie lineup too. All great films that itch to be seen on a big screen!

[@Roroxane]

Usually, when the title of a video on youtube contains "epic", you can brace for the worst, but not this time. Awesome work and thinking, as always !!

[@ThirdCoastCraftsman]

Thanks so much! Glad the title didnt disappoint!

[@mikemcneil7327]

Your boy looks like he was having a great time in the yard helping!

[@ThirdCoastCraftsman]

Oh man he LOVES helping dad

[@mikemcneil7327]

@@ThirdCoastCraftsman he'll have his own chisel working beside ya before ya know it. Third Coast Craftsman & Son Or Third Coast CraftsmEn 😁

[@ericruhlmann6817]

I feel like it's 50/50 if a wood working personality wears a dusk mask, and here you are making sure that not only are you covered, but Utz is as well. I appreciate the attention to detail. It's a funny/cute shot, but at the same time I would not have ever thought about making sure my dogs wear masks if they are out in the shop with me. Thank you for that! Great video as always!

[@greenearthblueskies8556]

I know I'm late to the party, but I love that

[@Goose8219]

Cmon UTZ look alive..... great video and set up. I got plenty of room in my back yard and looking forwards to making this project for the family and friends in my neighborhood.

[@offmyrockerretreat]

This is a work of art. Beautiful craftsmanship!

[@johnnyvsx]

Wonderful. Makes for a nice starter timber framing project. I've been planning on building a pergola (in lieu of a front porch) and want to do it myself. Extra kudos for all the famous movie snippets at the end.

[@ethanrobertson8921]

Awesome work, mate! Good to see the little guy getting involved too; my son loves helping out with projects.

[@ZacJones]

This is an awesome idea that'll get a bunch of use for years to come ! I love how its held together with nothing but dowels so you can break it down when you need too!

[@ThirdCoastCraftsman]

Thanks bud. It’s going to be really fun once the kids get older and we can have a bunch of their friends over

[@WarrioRAbsolutE]

Just for Quest for the Holy Grail and your taste in movies you take my like

[@SeeUsFly]

Big movie fan here. I've wanted to build an outdoor movie screen for a long time to entertain friends. Nice job on yours.

[@dilipmacbookssaparamadu3522]

Superb Out Door cinema .. screen and wood frame..!

[@matthewbutcher5295]

Epic selection of movies at the end. Nice job.

[@ThirdCoastCraftsman]

Thanks bud!

[@flux6472]

Love that your dog has a filtration mask!

[@BradiKal61]

Awesome build. I built a 120" movie screen frame this summer using 1 1/2" PVC and the only real question I had was how high from the ground the bottom of the screen should be. We were expecting people to either sit in lawn chairs or on blankets, and we didnt want so short a height that people's heads shadowed the screen, or so high that people on blankets had to tilt their heads up too much. We went with 4 feet up.

[@Magicinstalls]

That distortion in the black border would drive me nuts!

[@MrKirby365]

He's such a good doggo! and talented too...lol.

[@nickforlini81]

Dude.....your movie selections are on point

[@ThirdCoastCraftsman]

Lol. Thanks bud. I had a bunch of other ones too that I cut out because the video was too long

[@hifinyc-elliott]

Absolutely epic build!! Kudos man. Also, that saw is bees knees.

[@squelch13]

Wow.. Not Seen Last of the Mohicans in Years!! Love pretty much all those films Screen looked great.. wish I had the weather and garden for one!!!

[@ThirdCoastCraftsman]

It’s a classic!

[@DavidWaller123]

I picture you watching A River Runs Through It and appreciating that movie considering the boat project you are working on. Braveheart/Rudy/Top Gun/Gladiator seem to be everyday classics

[@mcseforsale]

That's a very nice frame. You could use it for ax or knife throwing if you hang targets from it when not watching a movie.

[@robertwright305]

Looks awesome man! Glad to see a clip of Jurassic Park, such a classic scene too

[@ThirdCoastCraftsman]

Yes it’s a good one!

[@saintsfanbudman]

Great project! Recommendation 3 O'Clock High for the win!

[@BKRcustoms]

Watching your son help was so cute!! I bet he loved it

[@ThirdCoastCraftsman]

hes a cool little dude!

[@russiandog2759]

Awesome project, glad to see your son helping you he’s so cute

[@ThirdCoastCraftsman]

thank you! he sure loves helping dad out!

[@davidmack7018]

Utz is not screwing this vlog up pssst Utz is the star of the show, he just needs more screen time, hey there's a theme going here, you're building a screen, and Utz needs more screen time. Utz it's okay by me if you eat his popcorn & hot dogs. Sorry Utzy don't look so down in the mouth, we all love Utz. Cool project maybe show you and Utz on an old couch you BBQing meat while Utz eats it, Im thinking Lone Wolf McQuade, Or The Dogs of War, with Christopher (dog) Walken. Both great movies by the way. Love your KZbin's best, Dave

[@jeredhale7554]

Great project and awesome choice of movies

[@andrewhochberger8748]

That was an awesome build using great carpenter framing skills. Love seeing Mohicans on your screen. I’ve always wanted to see Apocalypse Now and Lawrence of Arabia on the big screen.

[@ThirdCoastCraftsman]

Thank you!

[@sbsphotographer]

Superb project! Good to see Utz following proper shop safety and your diminutive peg helper. :) Excellent movie 🍿 choices also! Wonderful craftsmanship, I am amazed what you accomplish with a pull saw... Looking forward to more of the boat 🚣‍♀️... Have you considered perhaps some rod building with bamboo? Kudos! ✌🏻🐻

[@ThirdCoastCraftsman]

Thanks so much! Yea I’m looking forward to getting back to the boat too. I’ve had a bunch of other things keep coming up! Yes I definitely want to build a bamboo rod. It’s on my list!

[@mi_bowhunter80]

Love it, and great movie selection as well!!!

[@ThirdCoastCraftsman]

Thank you!

[@larryfisher7056]

Autolike for woodworking vids with kids helping....nice

[@pollettebaker5201]

Cool project. Very nice outdoor movie screen.

[@mikeparker3865]

Love all of your movie choices. Try Zulu and The Untouchables too. Great flicks

[@enesarar]

Came for the screen, found the saw. I need buy one definitely

[@Shadow-ol2ik]

Great job 👍 Utz is the best. Looks like the boat is coming along nicely

[@impact.4122]

I could really use this for live activities with teens!!

[@rjtumble]

Great project. Young Frankenstein would be fun to watch during the spooky season "What Knockers!" :)

[@StevenLutz1970]

On Golden Pond would be great in ab outdoor setup like that!

[@vincentmazzeo3743]

Beautiful work

[@trinettejohnson-williams3676]

This build is amazing!!! Independence Day with Will Smith

[@teckbugz1278]

That joinery though!

[@lilipaz1amor]

First of all that was awesome thank you! I m trying to build a screen that is wind resistant so I can open a free drive-in on my street now that we are all unable to be close to each other. Did you say there is another one that is easier to disassemble? Thanks, again your son is adorable!

[@EarnieMercerDungeonstiles]

Very nice build.

[@ModernBuilds]

So Awesome!!

[@ThirdCoastCraftsman]

Thanks man! Definitely a fun one

[@TheFootbaldd]

That's a pretty decent one. I did a sloppy version of this 10 years ago for a smoke pit movie night at the base I was stationed on. We made it through a couple movies before it was shutdown due to fun overload. I thought it was quite funny that the MAAs shut it down halfway into "The Last Detail" of all movies. I have wanted to build another for some time, but with a homebrew projector/receiver to run the whole thing. If you want a fun speaker project, my idea would be for a stacked line array of 4" full range transmission line encosures and even better would be a 2.1 with a subwoofer using a 2x4 mini-dsp, a stack of TI tpa3110 chip ampifiers, and 4" tang band speakers with an additional amp and sub to back it up. You could enclose all of the amplifiers, a raspberry pi, and a projector into one housing. Then have the two line arrays and a subwoofer enclosure separate. I have a fairly decent enclosure design for 4" drivers. The idea would be to build 5 sets of those, and then make a mounting structure to mount them into an arced line array. (a line source of sound projects significantly further than a point source)

[@reframeyourbody]

Great project to learn, hone skills and get a beautiful useful thing at the end! Thanks a lot for sharing

[@grayandholly]

Hey Chris, have you have made a chair? Thinking Adirondack style to go with the movie screen. What do you think?

[@EricJ0hansson]

Great movie choices, all of them!

[@FredMcIntyre]

Awesome work Chris! 😃👍🏻👊🏻

[@pmacedo6778]

Really... EPIC.... awesome! Many thxs

[@ThirdCoastCraftsman]

Thanks man!

[@pmacedo6778]

Third Coast Craftsman, Utz (is it written like that?)... is amazing! I want to see his chisel skills... 🤣 Love your work my friend!

[@georgevalenzuela2489]

Very nice!

[@richardclarke9966]

The dust mask on Utz 🤣🤣🤣

[@Ramparts4]

Good taste in movies!

[@ThirdCoastCraftsman]

Thanks bud

[@GREGB8801]

The good the bad and the ugly A classic

[@golfmike304]

Great video. Super cool idea.

[@ThirdCoastCraftsman]

Thank you!

[@allenwc]

Haha! Awesome! That's gonna be such a riot. And Now Utz is trying so hard not to distract you. Yup, my Ryoba saws just never get up to that kind of speed ;-)

[@TheThaddaeus1]

This is truly amazing, good job!

[@ThirdCoastCraftsman]

Thanks a bunch man!

[@clydedecker765]

Awesome build .. missing boat ....😀

[@GloveReady]

Where can I find the plans?

[@waveoflight]

I would recommend putting 2-25lb sandbag on each foot (both sides). Being a sailor, and into video production, you should know how wind can suddenly pop up.

[@nathantietbohl4770]

Please update on how easy it is to disassemble. I would wonder with offset holes and humidity/ swelling being outside how straight forward that will be. Thanks - Love the channel!

[@ThirdCoastCraftsman]

They come out no problem. Just use a smaller diameter hole to knock the pegs all the way through

[@nathantietbohl4770]

Third Coast Craftsman amazing. Good to know. Stereotypical Nomadic millennial over here and have been sketching out plans to build a ‘disassemblable’ desk and other furniture using ‘keys’ and draw boring

[@JackiG523]

GREAT project I am def going to make one of these. I live your movie choices and they’re some of my favorites, Monty Python, Jaws, Jurassic Park.... saw them all EXCEPT the last one with the Indians - what was that movie title???

[@dogcreekproject6872]

Last of the Mohicans

[@randomperson8695]

A lot of us Navy guys who have been to Gitmo will smile and reminisce watching this one. That was the only place I've been with an outdoor theater. I always liked it but it was annoying when someone pulled out of McDonalds and turned right because the headlights against the back of the screen would wash out the picture.

[@ThirdCoastCraftsman]

Haha great memories!

Woow great job.👍👏👏

[@ThirdCoastCraftsman]

Thanks bud!

[@johnevans935]

Very Cool. What Projector do you use? I would love to do your project but, as a former Framer and I'm older than the hills, I prefer to watch movies on the side of the Store Room painted Behr Silver Screen. You should consider building and selling your Screen as a Kit. Or sell the Plans. You're really good...BTW: how did you get the Dog to wear a mask without trying to pull it off?

[@WalterRiggs]

Thumbs up for Utz!

[@jackl7882]

Do the less complicated plans that show how you can bolt everything together come with the plans listed on your website?

[@FAMAWoodworking]

Great job Dude!

[@ThirdCoastCraftsman]

Thanks bud!

[@PO.Gosselin]

I’m curious a saw that your are using the wood is good mallet! I was checking to buy one is it the 20 or 30 oz

[@williammckeown4410]

Great video! I'd love to make this. The link to the plans is down, any chance you can repost it?

[@11fuzzmonkey11]

When will the boat be finished? 😋 love the vids keep it up!

[@ThirdCoastCraftsman]

ive had a lot of interruptions but you will see some more videos on that shortly

[@FrankPace54]

Yea! Really looking forward to seeing how the drift boat is coming out. You have to take us fishing on it when done. Well maybe spring season by then.

[@doubledarefan]

When you finish the boat, use it as seating for the theater, and watch boat/sea movies.

[@jonathancaouette4132]

This is amazing..Do you by chance happen to have this Timber movie screen frame plan for a 300 inch 16 x 9 (roughly 14 ft height X 20 ft wide) screen with the grommets ?:)

[@ShenzhenFoodandFunAdventures]

AWESOME!!!

[@the9thmonkey]

I like Tucker and Dale vs. Evil for a good slasher comedy.

[@ThirdCoastCraftsman]

Oh that’s such a great one hahaha. Hilarious!

[@steveblais1392]

Fantastic craftsmanship! Love utz great foreman as well as your little helper too! How long would you estimate it took you to make start to finish ?

[@ThirdCoastCraftsman]

Thanks. Probably 2-4 days

[@Mattsmommy8705]

Love this. What did you use to attach the screen to the frame? Thanks

[@travislayman6308]

Awesome! Does the plan link above have the bolt together design?

[@whonelly1220]

Do you have an info on the easier design? Looking to build something like this but i'm pretty new to woodworking.

[@aileenmcm499]

I’m super late seeing this video but quick question are your plans no longer on your website to purchase? I’m determined to figure out how to make this! Love the final result!

[@jrkorman]

Now all you need is a car in the backyard to sit in and I'm sure Michigan will supply the mosquitoes! Nice to see the little one helping!

[@ryanwjohnsen]

Love it! And the blue hat is back in stock??

[@ThirdCoastCraftsman]

Yes I believe all three colors are in stock

[@gsx743]

At that moment, when the segment of the black-and-white film was played, there was a thought that now there will be a moment with Star Wars. Imagine my eyes when I see Luke.

[@ThirdCoastCraftsman]

Haha you have the force!

[@Cedwest06]

DIY my ass, I need an engineering degree for this. Lol you did an awesome job

[@garethjones2312]

You can add Avatar to your collection, along with Tombstone for a good western.

[@riellalonde229]

What is the screen material made from? The link for the screen no longer works and I'm looking for a screen that doesn't have a lot of light bleed

[@Cragas100]

Utz is a boss dog

[@davidhughey7792]

Monte Python 😂😂😂 that’s good one so were the rest how about Tombstone

[@ThirdCoastCraftsman]

Oh man! “I’ll be your huckleberry” would have been an awesome one!

[@tonywhite2935]

Uh Chris, I noticed ion the background that the boat has sides on it. Now that movie night is over, lets see episode & please.

[@JTWoodworks]

Great work Chris! This turned out looking great!

[@frankrodrigues5305]

So what'd Utz do? Rip one loose when he was on your workbench? I think Top Gun needs to be on there, maybe some Dances with wolves, OOOHHH how about Backdraft?!?!!

[@raelynnearnheart8506]

Where are the less complicated plans that used bolts?

[@cuttwice3905]

May I recommend "History of the World Part One"?

[@ThirdCoastCraftsman]

I’ll check it out. Thanks!

[@marnismaritz1659]

What is the name of those shoes you are waering?

[@taylorcamp6157]

fine bros