Time Lapse- Cheap Paint Job- 2007 BMW F650GS Restoration | Techn' Moto

[@OldManTony]

You always get decent results with your spraying. You just to have the skills!

[@TechnMoto]

Thanks.

[@ridewithgnr2116]

Preparation, preparation, preparation!!!

[@FilipinaWifeAbroad]

We hit the road today, we went to the cemetery and stopped by a gas station along the way, I saw a group of bikers, u know, I really love my motorbike in the Philippines, it’s my hobby but the bikes here in the US is crazy!! Gosh! I wanna have their bike here, rock! So, the bottom line? That reminds me of you coz you are only my friend here who does like this , out of my 2k plus subscribers! I always look forward to your motorbike! I like the blue one better u know! Still here! U rock!

[@TechnMoto]

Thank you very much for the kind comments.

[@ridewithgnr2116]

Not sure if I told you already. Orange is my favorite color. The bike looks great!!! I know your going to hit some dirt and be instantly hooked on trail riding. We are older, but we have some adventure left in us!!!

[@TechnMoto]

Yep trail riding is fun but I’m starting to think I’m kinda old now 😆

[@homesteadingwithsadie]

That looks really nice not cheap looking at all

[@TechnMoto]

Came out okay

[@Motoramblings]

Wow. What a difference!

[@TechnMoto]

Thanks

[@steverusso4553]

Nice job!

[@TechnMoto]

Thank you! Cheers!

[@KimberlyCreates]

Happy Sunday my friend!!

[@TechnMoto]

You too

[@OZARKSHDRIDERS]

It doesn't even look like the same bike brother good job 💯✌️😎

[@TechnMoto]

Thanks again

[@RidinCountry]

Dam kid! Looks good. Bravo !!

[@TechnMoto]

Thank you. Good to hear from ya

[@bigk2080]

Nice!

[@TechnMoto]

Thanks

[@davidschoenoff4262]

thank you this has really helped , through ive had to sand and reshoot a few time before I got the feel spraying the big panels and the two rear ones , runs on the rears , did them twice didn't wait long enough between the paint and clear coat so it wrinkled , better the second time , but tried to cheat and put one back on with the luggage rack on , and slip it between the rack and scratch , tried to paint some with a piece of cardboard to catch the overspray on the headlight housing while its still attached , worked great till I realized that to get the front upper fender off , that Torx that goes in the middle with the clip on the other side , but in your video looks like you removed the clip nut ? from the bottom , I bought a set of rt angel Torx drivers whinging I might be able to turn the steering and then just lift up the long tab and get the Torx under it and just do a 1/4 turn at a time , but no , so il do it later , iam doing a bit at a time in the evenings as iam using it to get to work , so every day a bit more gets done and every night I have to curb the work so I can get some sleep, as ill forget the time , and yah, ive removed the frt turn signals I believe 8 times gave up on cheating and painted the luggage rack and letting it sit for a couple of days so the paint cures , it had a lot paint fade as it was a ranch bike , and your videos have shown me when ive got stuck , lol I tried to spray like you , I got runs runs runs , lots of sanding , lots of cheep paint , but now iam starting to get a better letdown I haven't mastered any thing like a one handed shoot but iam real happy with the results , when you shoot outside like that are taking the panels inside quickly , and the playing cards on the rims , 👍🏻

[@TechnMoto]

I've been doing painting with spray cans for a long time and still, when I rush things, I too get into trouble lol. Best advice I can give you is slow down. Four thin coats of paint is better than two heavy coats with runs. Besides no one learns without making mistakes, its all part of the process. Show me someone who has never made a mistake and I'll show you someone who has done nothing- as the saying kinda goes, lol. I painted this bike with cheap Krylon paint- can't remember if I did a clear coat or not- getting old lol. If you don't know, I have a playlist of a bunch of videos on this bike that might be helpful to you in the playlist section. Anyhow take care and have fun doing it. In the end you'll gain experience and I'm sure the bike will turn out nice. God bless and ride safe.

[@jojocosoro]

Amazing work, and above all, you shared it. Congrats and thanks. P.S.- I have the same bike, and I always wanted to paint it. Do you have your motor painting video? If yes, can you share it with us? Thanks and take care.

[@TechnMoto]

No, I did not record it. Pretty much clean engine well, prep for paint and then paint it. I did use high heat paint. Good luck

[@BiletFilesTV]

Amazing work boss. Hello there.

[@TechnMoto]

Thanks

[@davidschoenoff4262]

hi the front lower mud flap , that attaches to the fork support , it seems that mine is red loctight on one Allen bolt which I rounded off , didn't even budge , I removed the front wheel , and replaced the mudflap , but the support the one Allen that I rounded out bugs me , ive tried heat and its a stubborn , the support seems to take the heat and the bolt never really gets hot enough to loosen the Allen bolt , I don't think its going to be a issue , but its driving me a bit nuts

[@TechnMoto]

🤔 usually heating the bolt would break the bond. If it’s holding then I would say forget about that one bolt. You should be okay. After all it’s a mud flap. If it bothers you that much try heating it up again and maybe using vise grips to turn it out if you can get them on the bolt. If not- drilling and using a tap out might work too. But honestly if it is holding then I would say leave it be.

[@miguelitogomes]

pour le papier a pousser c'est de quel taille de grain que ta utiliser ??

[@TechnMoto]

👍

[@danycramer5011]

Hi, I was wondering something. If I'm going to do this, do I need to remove the engine parts to paint it? Or can I paint it without disassemble the enige parts?

[@TechnMoto]

it can be painted while it is together. Just make sure to clean everything well. if there is any dirt or grease or oil on the engine the paint will not stick. good luck

[@arjan-nuts-gaming]

I should get you here for some painting =) Its better to pay you, instead of doing it myself ;)

[@TechnMoto]

sure is easier 😂

[@امانىمحمد-ذ9ه]

ماشاء الله زورتك و اتمنى الرد 🤝👈🔔👍😍😍😍

[@TechnMoto]

Thank you

[@CezzDezz]

Hi im your new subscribers.keepsafe always

[@TechnMoto]

Thank you friend