time spy msi ge78hx 4090 laptop overclocked

[@user-hy6dd6en9l]

time spy = 22428, saving you the time

[@derekcranson2307]

Yes, I heard about this issue, so you actually made a mistake by updating the bios, I don't know why msi does this to customers.

[@ugur9038]

What is your current bios version and experience so far?

[@derekcranson2307]

@@ugur9038 it's E17S1MS.109

[@antoniocortese4471]

What elevator is that? I cant go below 80 c on gpu

[@vitalymichailov387]

Hello! Is power adapter, become very hot, at full load, at OC mode? Thx! Regards!

[@derekcranson2307]

Doesn't get that hot, I can still hold the power brick as you can see in the video.

[@AionStylish]

How did you boost GPU power above 150W? For some reason mine hits the 150W limit and won't go up even by activating the voltage meter on afterburner.

[@derekcranson2307]

The gpu o my laptop sometimes goes above 175w and I got important question for u, did u update the bios?

[@AionStylish]

@@derekcranson2307 I did upgrade to the newest one E17S1IMS.105

[@derekcranson2307]

I got bad news, updating the bios was a mistake, I got the first version of the bios. I'll make a video about this.

[@AionStylish]

@@derekcranson2307 I don't understand their intention to lower the power limit for 4090 on GE78HX, the temperature barely even reach 65 degree Celsius on my end... I guess the best I can do is wait for a better Bios available now that lift the gpu power limit back to 175W. It's also worth a mention that some bricked their laptop with current Bios (E17S1IMS.105) from what I know (happened with GT77HX, too).

[@kv11gaming]

​​@@AionStylish I have the .107 bios version but still gpu is hanging around 145-150W. I didn't get that from MSI, they are marketing it as 175w tgp even mentioned the same in nvidia control panel. Total cpu and gpu combined power touching 225W only not 250W marketed by MSI.

[@anthonbakkalian2352]

Did you do undervolting and repasting this unit if I am not mistaken, right??

[@derekcranson2307]

Yes I did undervolt the cpu but not by much.

[@anthonbakkalian2352]

@@derekcranson2307 what about repasting?

[@derekcranson2307]

I repaste it with tpm 7950