Timelapse Build - Cooler Master NR200P [Control Mod]

Components used in this case mod:
►Intel Core i7-10700k: geni.us/viaSMNH
►MSI MEG Z490i UNIFY: geni.us/MFoo7F
►MSI GeForce RTX 2070 ARMOR
►Patriot Viper RGB 2x 8GB 3600MHz: geni.us/4kol
►Patriot Viper VPR100 RGB NVMe M.2 SSD 1TB: geni.us/C4wwYGQ
►Cooler Master NR200P (black): geni.us/bznL1
►Cooler Master V850 SFX Gold: geni.us/jQCAqXB
►Cooler Master MasterFan MF120 HALO (BLACK): geni.us/F5ID
►CableMod Pro Custom Extenders: www.cablemod.com
►EK-Quantum Kinetic FLT120 D5 D-RGB: www.ekwb.com
►EK-Quantum Torque HDC-16 Black with Red rings
►EK-Quantum Magntitude Intel CPU block 115x - Nickel Plexi
►EK-CoolStream SE240
►Subscribe here: bit.ly/3erJB33
►Follow me on Instagram: / pc.crazy
******
Since in the game everything can take different shape and room re-arrange, I decided to lift up the top panel to place the radiator plus giving it a bit more space. Then the pipes are basically going crazy in terms of constant re-arrangement. Adding an FLT120 on the PSU cover and even custom sleeved extenders making nice cable management and everything to fit inside such a small case giving the idea of possible expansions. Custom backplate on the graphic card and a paint job on the back side of the case with a huge CONTROL logo.
Thank you for watching. :)
******
My recording gear:
►Camera: Canon M50: geni.us/Mfih
►Lens: Canon EF-M 18-55mm STM: geni.us/KO6EYn
►Mic: Rode VideoMic with Rycote Lyre: geni.us/yBAlO
►Tripod: Vanguard TB-19
►Tripod: Joby GorillaPod 1K KIT: geni.us/G3IEHXw
Check my other social profile at:
►Facebook: / pc.crazy21
►Twitter: / pccrazy21
Music by Epidemic Sounds:
►ELFL - Octadrone VI
►Aiyo - Given In To You (Intrumental Version)
NOTICE: Amazon links provided are linked to my Amazon Affiliate account and support the channel at no extra cost to you.
#controlremedy #custombuild #coolermaster

[@xsteve14]

The way you mounted that 120 FLT is perfect. I've been trying to figure out how to mount one in my NR200P build and stumbled across this video. Thanks for the inspiration!

[@PCCrazyDario]

Sorry for the delay, but thank you very much!

[@Commsfarage]

very nice. I'd have something pretty like this if it wasn't going behind my living room TV. ENJOY.

[@PCCrazyDario]

Thanks for the comment. :)

[@kalitvenec]

сборка мечты. it turned out very nicely

[@PCCrazyDario]

Really appreciate it man! :D

[@swizzler8053]

Nice build bro. Stay safe and keep up the great work. Greetings from Holland.

[@PCCrazyDario]

Thank you very much. Glad you like it. You too stay safe!! :D

[@BongManCSGO]

Great build.

[@PCCrazyDario]

Cheers for that :D

[@RiNaTru-lg7nu]

Шикарно 👍

[@PCCrazyDario]

Thanks! :D

[@dtnnn04]

Which specific cablemod did you use? I dont see one specifically for the cooler master sfx 850?

[@PCCrazyDario]

These are extenders as you might have seen on some parts of the video. I did hide the cables nicely so that is why you might thought that these are full size cables from PSU to the main components.

[@gabrielgranadosg]

Gorgeous build, all the parts match perfectly! 😃👍 Thanks very much for sharing this video! 💖 *Greetings from Costa Rica!* 🌴 PD: I have same memory kits (Patriot Viper RGB 2x8gb) but mines are at 3200 mhz and they're so beautiful! 😍 Love the RGB SSD used in this video too! 🌈

[@PCCrazyDario]

Thanks a lot Gabriel! :D

[@PCCrazyDario]

Hi Gabriel! Hope you are doing ok? :D Haven't seen your comment in a while so wanted to check how are things going. ;)

[@gabrielgranadosg]

@@PCCrazyDario Yeah Im doing ok, thanks for asking Dario, I've been busy with other stuff but things are going fine, hope you too! 😀

[@PCCrazyDario]

@@gabrielgranadosg Nice to hear that and glad you are doing ok. :) Everything is great on my side as well. Thanks. :D

[@mavado5046]

This is art:)

[@badzilla7491]

Nice build. I'm surprised you used such big tubing!

[@PCCrazyDario]

Thanks! Glad you like it. Well, tbh, I stopped using 12mm OD and switched to 16mm OD because those look so sick. 🤗

[@redluckog7008]

@@PCCrazyDario I agree, thicker tubing always look so much better

[@PCCrazyDario]

@@redluckog7008 Hehe so true. :) I once did a mistake and with C700M went with 12mm OD. Man that was such a mistake. Looked funny. So next time I do C700M, I'll be running 16mm for sure.

[@quique0884]

Is it possible too until the flt 120 directly to the back of the psu bracket using its original brackets that it comes with? Keeping the psu bracket jn it's original configuration instead if front mounting it?

[@PCCrazyDario]

I haven't tried it honestly. But then again, you have now FLT80 which might be suitable for an easier mount in any scenario. Sorry for the lack of info.

[@SleepyWindex]

What was that little mount u used to connect the pump res to the psu bracket ? Would really help if I could find out what that was.

[@PCCrazyDario]

You can order it from www.ekwb.com Also, I had to improvise with the bracket since this is some sort of a combination between two brackets.

[@SleepyWindex]

@@PCCrazyDario thanks !

[@PCCrazyDario]

@@SleepyWindex Not a problem! :D

[@whate1se]

why didnt u cool ur gpu too?

[@jamesharnish8352]

how did you mod the top ?

[@PCCrazyDario]

Cut out two holes for the rad so I can place the fittings and design a custom top plexi part so it can cover it with the original meshed top glued to it. ;)

[@Eduardgorbatyuk]

Is it possible to fit in the

[@christopherjames9843]

Looks ridiculous with that radiator jutting out of the top of the case.

[@PCCrazyDario]

Thanks for the feedback.

[@OfficialEthern1ty]

Did you printed the top to extend the nr200 for the radiator? Do you have the stl?

[@OfficialEthern1ty]

Love the vid

[@PCCrazyDario]

Thank you very much. Actually no, I didn't print it out. I used a standard acrylic part and bend 4 pieces which I glued together afterwards and spray painted them into white to match the colors of the case.

[@spodee55]

@@PCCrazyDario I would love to see a video of that. Of just building the top hat

[@PCCrazyDario]

@@spodee55 Yeah, I would usually do it but I was on a schedule and didn’t have time to place a camera properly and record it. I used a straight plexi part and cut it into 4 parts. Then with heating gun bent those edges and glued them together. That is all.

[@spodee55]

@@PCCrazyDario yeah I have no idea what kind of plexiglass to buy, how to cut it, what to cut it with, where to set the heat gun to not melt it etc. The would be a great video

[@MrMrlinkblack]

Water block in top seems weird

[@PCCrazyDario]

That is a raditor on top. I couldn't place it anywhere else with hard tubing.

[@Sica1000]

One heavy bend have you made there (Y)

[@PCCrazyDario]

Actually, all of them were quite easy to make :D

[@PCCrazyDario]

@Emroze K Thanks a lot. Really appreciate it :)

[@D1craigRob]

Can't go to all that effort and not add in the gpu to the loop...

[@69tytyhar]

stopped watching and put a dislike as soon as I saw you paint with out sanding you need to scuff the area up

[@AnteraxxX]

Good one - maybe fit some noctua A12x15 chromax as intake in the bottom for better gpu cooling 🤔😅

[@PCCrazyDario]

True, but this was a case mod and these were the parts I had to use. :)

[@AnteraxxX]

@@PCCrazyDario Ah ok^^