Timelapse of 3D printing a formula 1 car and satisfying asmr sounds

[@3DPDoctor]

Thank you all for being here and watching my video ❤. I appreciate you all. Let’s grow together to 1 Million subscribers. Don’t forget to subscribe 🎉🎉🎉🎉

[@Абдурахим-ц3ю]

Еееееееееее​@adelapi

[@coolrafid]

🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉is a

[@coolrafid]

🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 is a new guy like to work

[@angelocelardo]

😊​@@coolrafid

[@TheGuywhoComments7]

@@coolrafiduh what are you tryna say just wondering?

[@dalienfaus]

I think I liked the initial version as a rainbow tree in the mountains!

[@zoruanick1996]

Me too!

[@faerie1599]

...... me three!!!.......... less wasteful too!!

[@gaines8807]

@@faerie1599if I’m not mistaken I think people can reuse the filament they 3D print with

[@faerie1599]

@@gaines8807 ....... that's good to know, thanks.......... and I hope they do!!!!

[@Ballosopheraptor]

Me too, nothing to do with the material wastage tho. Just most arbitrary random shapes look less offensive than a colossal monument to man’s disregard for nature. Like no way to better say “I’m a complete trash dickhead” than to have a formula 1 car model associated with you in any way. Garbage people.

[@PaulieLauraXombie1331]

Would be cool if they had specific recycling so you can melt the waste to make more filament/spools

[@sallyplayzgames]

You can do that! It is just an expensive process

[@m4y4r4]

@@sallyplayzgames so there is hope one day it’s going to be cheap… maybe?

[@Adolf_Hitler-1889-1]

​@@m4y4r4 maybe..

[@mrsg8996]

Don’t give up hope yet. There is the alternative of turning plastic bottles into filament if you are interested in turning plastic waste plastic into filament. kzbin.info/www/bejne/Z6qslmSGpcSBqMksi=5obkL6q8p9nhbFlN

[@B1gBossMan]

​@@Adolf_Hitler-1889-1 maybe...

[@spacecardiver]

Those supports look almost organic. Like veins or roots or something.

[@thelibertyprojects.4747]

Like trees?

[@manuelmatos4322]

​@@thelibertyprojects.4747 Too

[@Biel.Azevedu]

​@@thelibertyprojects.4747 This is the name of this type of support

[@lancerfrom2007]

He used it because natural structures offer a strong body and all with minimal resources.

[@spacecardiver]

@@thelibertyprojects.4747 yea

[@Individuo80]

It's specifically designed to race on a corkscrew-shaped track

[@matrixsequencescripted]

😂twisted

[@TheoTheCrasher25]

Laguna seca?

[@johnnefilenmadrid5408]

ngl, without removing the excess as a support it looks really cool, it's looks like a biomechanical formula car.

[@aaaaa-nw8hc]

Or a tree psichodelic. 🌲

[@elweys7376]

Dude that f1 had a nervous system

[@Panzerfaust_1939]

It got its arteries as well

[@Jeff-ss6qt]

F1 cocoon. And that's how rally cars are born.

[@oooohapenny4707]

More like vascular

[@pengos1639]

Not anymore

[@damienjohnston3268]

It actually looked like it was in the air tunnel before destroying it. Looked better

[@luthfieyudhairawan3883]

Biblicaly accurate F1 car

[@TonytheGr8]

Real f1 cars dont have scoliosis tho.

[@ExtremeUnction1988]

😂😂😂

[@ExtremeUnction1988]

BE NOT AFRAID

[@Abarenboshogun000]

Skewed

[@jennyg9131]

Scrolled down for this comment 😌

[@CitrousFlea1793]

Honestly it looked way cooler before removing all the support filament.

[@Eomak]

yea looked like a peace off art work...

[@ragnarrothbard3418]

Came here for this comment.

[@yallareblind4948]

@@Eomakpiece of artwork, yeah!

[@MimiThomaFlwrs]

It looked revolting y’all need a helicopter ride and a half

[@FloatingChameleon]

A metaphor for what humans do to nature's beauty

[@bread_lover1649]

sent this to my aunt and she replied with "why is it gay?"

[@KayJayCrazy]

The Gay F1 😂😂

[@99ZondaS]

"Do you think F1 cars grow on trees?" "Yes"

[@liecht]

The torque was of that extent it twisted the chassis.Such a powerful car!

[@fluckter_600]

Yeah I saw it twisted too

[@KoolDog427]

The twist was designed

[@deviousredneck5109]

@@KoolDog427why? Indy cars don't bend like that..

[@doggygirl3187]

@@deviousredneck5109 creative liberty I assume

[@spikyjohn21]

Why is it bent?

[@Paws_of_Poppy]

Fym?

[@maddyshea916]

😂​@@Paws_of_Poppy

[@christopherstorms5122]

​@Paws_of_Poppy you must have been looking at it cross-eyed, eh?

[@bionicmaleficent]

​@@Paws_of_Poppyyou must be cross-eyed if this looks straight to you!!😂😂 The front wheels twist one way & the back wheels are twisted the opposite direction. There is NOTHING straight about this car!!

[@theskyworrier]

​@@christopherstorms5122 yeah he's right near the end it looks bent and not straight

[@Treesgrowcarrots]

DOOT DOOT DOOT MAX VERSTAPAHHH

[@YumzOffical]

I feel like he was either extremely calm or extremely nervous while doing this

[@omega_cube]

beginning: 🪸 End: 🏎️

[@Sigil_Firebrand]

Watching you strip the supports made me feel MUCH better about how I pull supports off things.

[@Onlinephfinds]

at first, I thought he was destroying the product, lol

[@janek500sxd]

Me too

[@Panzerfaust_1939]

Me too

[@ГеоргийБения]

Why he destroyed this jungle? :(

[@doriancoreyscloset421]

I did too 😅 I was like "what was the point if you're gonna....oooh"

[@T.N.O.V.]

No, he was destroying the demon known as “the support material”

[@Glizzy_Overload]

TU TU TU TU MAX VERSTAPPEN!1!!1

[@savagex378]

Slicer: How many tree supports do you want? 3DPDoctor: Yes

[@DailyDuckss]

Dangg how long did that take to print???

[@JEliotDeGolia]

As a 3D printing engineer, this made me cry...

[@fardboi9781]

there's no way this amount of filament is needed right??😂

[@gunkmunkie6611]

As a non-3d printing engineer, this made me cry.

[@AtheosTheAtheist]

​@@fardboi9781he printed it in the weakest possible configuration to ensure the most support filament needed to make a viral video. If he printed it on its belly it'd need very little filament and be strongee

[@Nameonly67]

Someone doesn't know how to use cad, so many supports for no reason 😂

[@xXxJSCOTTxXx]

As a 3D printed engineer, I am incapable of crying...

[@psychocommenter2556]

Tree❌️ CAR✅️☠️

[@tamannabhuyan8175]

Car❎ supra✓

[@HalfBreadOrder]

supra🚫 bent ☑️​ @@tamannabhuyan8175

[@xxheavyswagxx]

​@@tamannabhuyan817512 years old supra fan spotted

[@dhanushcreativecornerdcc5637]

That car bent😂😂

[@dhanushcreativecornerdcc5637]

Thank you for 17 likes❤️❤️❤️

[@DonBasado4201]

Thank you for 1 like

[@Musicman995]

Thank you for no likes

[@CrooLyyCheck]

year 2050: Guy, keep writing thanks for the like

[@trendgil]

Guy was putting so much force on a freshly produced sculpture.. how silly

[@ItisISyn]

That 3D printer turned into a sports car. 🚗

[@trueheartintent]

Fractal designs looked crazy.

[@TheNobodyofYoutube]

Me thinking it was a castle💀

[@AnnAnnie-fw7tf]

Fr😭😭😭❤😂

[@amirulfikri8004]

Same🤣

[@Phantom_Rytec]

Bro is deaf didnt hear a f1 car sound

[@DisassemblyDrone-T]

I thought it was a rocket ship

[@BD71ARNAV]

Me to😂😂😂

[@Reds3DPrinting]

Holy Doc, what layer height did you use?! It looks like i could climb those steps from here!

[@GI1Tch1]

on god 💀💀

[@Zookalicious]

I kinda like the detail

[@SeanOBryanZZ]

It's not layer height it's resolution

[@ImMimicute]

Was gonna say, damn thing looks like a minecraft build

[@itayp020]

That is very very very beautiful!!!!!!

[@toonmeowslecs6791]

DOOT DOOT DOOT DOOT MAX VERSRAPAAAAAH🗣🔥🔥🔥

[@CalamityHillMusic]

Looks like a 80s cgi acid trip.

would it be better printing it horizontally instead of vertically?

[@anti_honey]

I think he would've needed to print it in parts since it's too long to fit on the bed horizontally

[@elsunshine9976]

No

[@dreadaby]

​@elsunshine9976 yes it would he will have less of a mess and the it won't come out like it was from the upside down with all those veins a literally nightmare

[@chadhayes4945]

There would be less support material needed to print it horizontally assuming it even fits on the print bed. Like others have already mentioned, it may need to be printed in several pieces to accommodate this. Additionally the rainbow pattern would not be as visually appealing printed in this orientation since the layer lines are now printing lengthwise.

[@webberq2]

it's too long so no

[@WurstRacer]

The 3d print supports are giving me flashbacks to scorn somehow 😞😞

[@sohamsengupta6470]

Yea they're rather Geiger esque

[@NoriKassidy]

Couldn't be the VEINS, could it?

[@filip4524]

3d printer for real said:🏍🏍🏍🏍🏍🏍🏍🏍🏍

[@Flameproti1]

The cracks are so satisfying 😀

[@woodentrainboi3769]

Those sounds weren’t satisfying at all and now I have goosebumps

[@hongthainguyen5334]

For some that is probably satisfying the goosebumps. Idk can’t be me.

[@sonny7669-hc1dl_HD]

3d printer with normal sound: NO 3d printer with motorcycle sound YES!!!!!!!

[@vitaliylomanoff1759]

Normal Sound Is Better.

[@sonny7669-hc1dl_HD]

Yes

[@Jason-jj6hq]

Motorcycle??? Its ab f1 sound

[@glennslendrian4031]

F1 sound*

[@BlazonStone]

@@glennslendrian4031 If you tape two motorcycles together side by side it's basically becomes F1

[@andrewwoulfe6579]

What is the wavy texture? Is that something of an artifact from the printing?

[@Cold_Cactus]

I think they messed the print up somehow , i know almost 0 about this but from all the prints I've seen I just don't think they know what they are doing or they made it look bad intentionally, which idk why you'd do that

[@michaelbrown5794]

They resemble extruder artifacts at first glance but its actually clearly intentional. Model is twisted and stair stepped for some reason.

[@seenitpurple]

IT LOOKED WAYYY COOLER before you broke it 😢

[@Stage_10-49]

That’s cool I dare you to make a uh 3d printer of skull body

[@katiewaterrose]

Too bad you couldn't have saved the supports as separate creations. They looked so cool!

[@randomvr-zt6rl]

You forgot the halo

[@Guest4465]

Older f1 car maybe

[@Mad-Fire]

Is it just me or did the car at the start look like it was from the upside down

[@AnsareHossain]

Bros asmr is satisfying 😌😌

[@ThriamTV]

With every layer that emerges, it feels like witnessing a digital miracle-3D printing is truly next-level! 🌍

[@sergiomarquezbanda5036]

Is It twisted because the printer prints in circles or did you do it intentionally?

[@oliviasavino8053]

The fact that it is a car and when it’s 3D printing, it sounds like a car going vrooooooooooom vrooooooom 😂😂😂

[@Anonymous-fr4oz]

Mountain suitable F1 car🙃

[@rachf9695]

Grew up hearing my grandfather and step dad watch racing and formula one my whole childhood so this was pretty cool! Now I have a son who is obsessed with cars! A 3D printer would be so much fun!

[@Tungstencub3]

That v10 sounded 🥵👌🏿🤌🏿🫦

[@Tungstencub3]

H A W T

[@tylerstahlhood]

So much torque, the chassis twisted coming off the line

[@DetectiveTrupo203]

Toretto!

[@nousername7582]

Seems like an inefficient and wasteful way of doing that but I don’t have a 3d printer so idk

[@teddy_ursidae]

As a 3D printer owner, I agree. The problem is that the model used doesn't particularly look well suited to being printed with its awkward overhangs

[@nonhotrovatounnomemigliore9221]

Does it matter if it's wasteful? I don't think so after all the guy is going to get all the money spent on filament with this video's views.

[@c-side-]

@@nonhotrovatounnomemigliore9221I don’t think it’s about the money hey

[@nonhotrovatounnomemigliore9221]

@@c-side- then it shouldn't matter if it seems waistful or not

[@c-side-]

@@nonhotrovatounnomemigliore9221missing the poiiint ♻️

[@montysmart5683]

But how does it crack so easily

[@TheHomieAtlas]

those are the supports, you crack them off after you get done printing because supports help the print not fall off the bed while printing

[@montysmart5683]

Ohhhh

[@montysmart5683]

Ty

[@jimmyhuang6891]

Why is it so satisfying ❤

[@ThatNumber2.25]

DUN DUN DUN DEN MAX VERSTAPPEN (ik ben nederlands)

[@jettlipka]

Supports use a lot of print but are super satisfying☺️

[@oliverx65]

They have 0% density so probably don’t cause much waste

[@eastcoastscarface]

Now that was crunchy

[@CallumLovesCars10]

That V10 sounds immaculate.

[@matelukacs6360]

the race car sound 🤣

[@stevebuildercraft8510]

"To, To, To, To max verstapen To, To, To, To" absolute banger🔥🔥🔥

[@jaker3151]

The excess aren't just supports. They are needed to give the car its uniform striped rainbow pattern.

[@MOD12323]

No they arnt it would stripe without them

[@Aden2998]

So satisfying 😍

[@miketrue385]

I NEED THISSSSSSS❤❤❤❤❤❤❤....well done

[@issacgonzaleztapia4421]

MAX VERSTAPPEN🗣🗣🗣🔥🔥🔥🔥

[@kunalpradhan3846]

Your supports had a nice print

[@livestreamchicagoevents9987]

Can you recycle the support filaments? 3D printer should have a melting option… to recycle the material

[@eggheadusa]

I like the way the supports look

[@AskformeJohnT]

I love how organic the tree supports look

[@YaNeK92]

What's the name of the gadget the model is spinning on? 😄

[@ОгненныйВолчонок-ы8в]

Why didn't you print it horizontally? I mean it would take less time I suppose

[@pauldunn1901]

it is really interesting cura tree support setting and it easier for owner to snap off leave 3d printed undamaged

[@Ilovetulinspower23]

Support structures on 3D prints like these are always so cool. It looks like veins running throughout the print. Really cool!

[@swankyview]

This was ASMR for my ears and visually dazzling to my eyes!

[@HXSKlmfao]

this is how the cars are picked off the f1 trees

[@supercoolmaniajon265]

This is like asking an AI to draw a car and then having to draw over it to see.

[@red_analog_productions]

That f1 car can't go straight

[@dyarpshder]

Thought bro was printing a tree

[@BernardoSMA]

The final: TUTUTURU MAX VERSTAPEN! TUTUTURU MAX VERSTAPEN! TUTUTURU MAX VERSTAPEN!

[@TFIta369]

Did it warp during printing? Or is it twisted by design? The 4 wheels are not coplanar. 😮

[@Cronkna]

Damn, that is so warped

[@buildertherobloxian4731]

As Satisfying as that sounds it must've been a Pain to Spend a Long Time Pulling that Gunk off and Such.

[@MichaelSuperbacker]

Why do you need all that extra over the car??? Structural support?Would it not be possible to print without it?

[@TheodoreVang-v7b]

It is just me who thought it was a rocket ship

[@whimscott7455]

So crunchy!!!

[@six_buck_dlc]

i like how the supports looks like you’re freeing it from coral or sum

[@RoxanneClimber]

That 3d printer sounds fast as hell

[@43eyes]

Needs more supports

[@hieuphan4456]

Does the printer automatically add the scaffolding to the design when printing or do you have to use a program on your computer to generate it first?

[@Peace4life-4everyone]

Amazing, It look like formula1 air flow velocity simulation

[@Aliceeee6_]

I thought that was a face for a second 😅

[@Skirbiy]

"Excuse me sir, there is an F1 car in my supports"

[@ChloeASMR91]

at first it just looks like a bunch of tree branches put together haha

[@LEGO_CREATOR_IDEAS]

I thought it was big tree😂

[@Amazonworker2321]

The few times I've 3d printed, I've left the supports on, it looks cool a d makes nice trees

[@MargoIndigo]

is it just me or does it seem like there are a crazy amount of unneeded and redundant supports here? i’m a 3D printing novice still, correct me if i’m totally wrong!

[@jhgvvetyjj6589]

The supports are supposed to make the sound of the car during the printing process

[@krisclem8290]

Is that amount of supports really necessary for this piece or was it just for video engagement?

[@bestsqued]

I was enjoying the sounds and then DURR DURR DURR DURR

[@rickymcfall6034]

Probably feel so satisfying

[@xenapriestess5963]

I would watch a 10 hour video of this as ASMR!

[@Target-Vr-Gt]

"Tu tu tu tu maxverstappen"😊