Tap to unmute

Timer(input capture) with STM32

  Рет қаралды 1,997

self-study electronic engineer

self-study electronic engineer

Күн бұрын

Пікірлер
@bennguyen1313
@bennguyen1313 3 жыл бұрын
I understand if you are interested in counting rising or falling edges then setting up the timer as a capture-compare makes sense... however, #1 How does the prescaler value affect the counting? Is it only for __HAL_TIM_GET_COUNTER ? #2 I assume enabling the interrupt will cause it to fire whenever there is a rising edge, but won't it count without using any interrupts? i.e. via __HAL_TIM_GET_COMPARE?
@darrenrussell3214
@darrenrussell3214 3 жыл бұрын
a tip: you can watch movies at InstaFlixxer. Been using it for watching loads of movies lately.
@quentinquinn8205
@quentinquinn8205 3 жыл бұрын
@Darren Russell Yea, I have been watching on InstaFlixxer for years myself =)
Enable Timer(counter)with STM32
10:18
self-study electronic engineer
Рет қаралды 3,3 М.
INPUT CAPTURE using DMA || Measure High Frequencies and Low Width
11:01
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
Stm32F4 Input  Capture DMA ( 2 timers + 2 channels ) - VN23 | TR
14:11
veysel gokdemir
Рет қаралды 4,3 М.
STM32 Programming: Read PWM Input signal for Radio controller
19:42
Steppe School
Рет қаралды 3,3 М.
NRF With STM32
27:33
self-study electronic engineer
Рет қаралды 3,6 М.
hcSR04 module with STM32
14:23
self-study electronic engineer
Рет қаралды 1,5 М.
STM32 General Purpose Timer: Understanding Input Capture IC Mode -1
8:04
Fastbit Embedded Brain Academy
Рет қаралды 34 М.