Snorkel Para Nissan Frontier Installation

[@aaronplaster5818]

Great video did mine a few months ago! It's a great mod and makes the truck look a lot more aggressive. Always nice to see another frontier like this in Texas

[@Xploring_The_Outdoors]

Thanks I’m not great at install videos I usually get to caught up in what I’m doing and forget to film lol.

[@daveparsons5442]

Hello from Virginia,just came across your channel.Have the same snorkel ,nice install.Nice Fronty.I have a2012 Pro4x with winch high clearence bumper 2.5 Radfflo 3 inch lift skids,rock rails Arb diff cover,shock skids, throttle body spacer,and Voltaire box .Set up to camp with basket on roof with Arb awnings,lights all round set up with solar to battery in a box and homemade draws.Tents are either swag Oz tent or 67 m416 trailer with rooftop tent for bears and snakes in summer.Cheers Dave

[@Xploring_The_Outdoors]

Your rig sounds awesome! Thanks for watching, I’m working on a couple trailer projects myself. Happy Camping friend!

[@scottrosenke8705]

You did an awesome job well done, measure twice or three times and cut once. Im going to get one of these.

[@Xploring_The_Outdoors]

Hey Thanks I just took my time and it came out great.

[@OverlandPNW]

Very nice. I have one on my Toyota. It was installed by a shop. I need to go back through the installation and see if they did a good job at making it water tight or just did it as a clean air intake. I know its primary intended purpose is clean, cool air but I'd like a nice water tight fitting as well. I just watched an ARB video on this and they recommended it be done as both.

[@Xploring_The_Outdoors]

Yea that’s why I try to do everything my self so I know what’s been done for a little peace of mind. I still have the diffs to vent too

[@OverlandPNW]

@@Xploring_The_Outdoors Totally agree. That's what I do now as well.

[@Xploring_The_Outdoors]

@@OverlandPNW Although I was a little nervous doing this job, but with each job completed the confidence and skill leave increases.

[@PepperSchism]

Nice job man!

[@Xploring_The_Outdoors]

@@PepperSchism Thanks

[@BigBirdBiking]

Nice job. Looks good! Always good to see your videos and the pride you take in your truck. Mine finally gets new wildpeak at3w's today the new rough country shock and strut kit( 2.5 lift ) and soon as we clear this snow and ice the old girl going to the body shop, fixing some rust and painting it OD green and black with bully liner fingers crossed lol. keep enjoying the outdoors

[@Xploring_The_Outdoors]

Thank you, I love my truck and the way it’s coming along. Yours will look great be like a whole new truck. I looked at the wild peaks before I bought the tires I have, let me know how you like them.

[@fishermanmitch1]

Nice install. Love the cattle dog.

[@Xploring_The_Outdoors]

That’s my buddy Bandit, he’s always with me.

[@mitchellsalzman4677]

@@Xploring_The_Outdoors I have Neko and Banjo and they are both blues as well. Always right with me too.

[@Xploring_The_Outdoors]

@@mitchellsalzman4677 Yea I never had a dog that was this attached to me, bandit follows me everywhere.

[@BrianAspinall]

Hello from Ontario, Canada! Love the outdoor content. New sub from me!

[@Xploring_The_Outdoors]

Hey awesome nice to meet ya, and appreciate the Sub very much. Canada is on my list of places I really want to see.

[@Xploring_The_Outdoors]

I subscribed to your channel as well.

[@BrianAspinall]

@@Xploring_The_Outdoors Cheers!

[@johnnydeleon7772]

I see you have had it for a few months, have you put it through some water? As far as it runing in water Is it sealed? Or is it just a temporary thing to keep the water out of the intake? Im used to snorkles on my can am you can literally park a canam underwater with a snorkle obviously not parking a nissan under water but will it go a good length under water and stay sealed?

[@Xploring_The_Outdoors]

It will as long as you seal it up on installation as I did. However my fuel tank vent, transfer case and other vents haven’t been relocated yet so I haven’t done any street crossing yet.

[@sequeiranestor]

Hello, thank you for your video, it will be very helpful to me when I install it on my 2017 Frontier. I have a question for you, was the pilot hole, on the template, not in the center of the big circle drawn on the template? Thank you.

[@Xploring_The_Outdoors]

Hi Thank you for watching. if I remember right the pilot hole isn't in the center of the 4" hole I believe it was toward the top. The reason for that is the shape of the frontiers fender how it rolls over the S pipe has to slide over the top of the piece on the snorkel itself. If you need any help you can message me through my facebook page here facebook.com/Xploringtheoutdoors

[@sequeiranestor]

@@Xploring_The_Outdoors Thank you, I did send you, another question, through facebook messenger. Thanks.

[@mikemorgan4670]

Great video Dude. I am going to be attempting this same install on my Frontier today. This was very helpful and motivating. Did you plug the drain in the airbox?

[@Xploring_The_Outdoors]

Yes but I’ve been thinking about rainwater accumulating in a box so I was thinking about making a rubber drain plug to put in there and it’s easy to pull out

[@mikemorgan4670]

@@Xploring_The_Outdoors Did you also seal the mounting bolt in the bottom of the airbox? Or do you think the rubber washer is sufficient? Thanks for your feedback.

[@Xploring_The_Outdoors]

@@mikemorgan4670 I used that clear silicone I used on the Pilar hardware and inside the tube connections in the fender. How’s it coming?

[@mikemorgan4670]

@@Xploring_The_Outdoors Moving along nicely. Just have to seal the airbox and reinstall it. So far it has gone about as smoothly as yours did. Not much cussing at all. Thanks for asking.

[@Xploring_The_Outdoors]

@@mikemorgan4670 awesome I was going to say if you needed any help you could message me through my website or my Facebook or Instagram pages, listed in the descriptions

[@ralphhalili8511]

Hello was that a 4" hole saw?

[@Xploring_The_Outdoors]

@@ralphhalili8511 I believe it was I’m out of town at work or I’d check and make sure but I believe the instructions I had said what size to use

[@lukedontknow9283]

Hey mate isn’t that a Navara? Have you tested the snorkel in water yet?

[@Xploring_The_Outdoors]

Here in the states they call it a Frontier. No I haven’t tested it yet I don’t have the diff breather relocated yet, still gotta do those.

[@muscleman0415]

Where did you get your front bumper?

[@Xploring_The_Outdoors]

I ordered mine from bumpersuperstore.com/c-1209487-shop-bumpers-by-vehicle-nissan-frontier.html

[@Azntrutek2012]

Wonder if this frontier snorkel will fit second gen xterra ?

[@Xploring_The_Outdoors]

That I can’t answer but the people over at @ironman4x4 might be able too!

[@Azntrutek2012]

@@Xploring_The_Outdoors thanks 👍🏻

[@cowboygil760]

I have to ask who makes that front bumper and where can I get one?

[@Xploring_The_Outdoors]

ARB makes it and I ordered mine from the bumper superstore

[@cowboygil760]

@@Xploring_The_Outdoors Ok thank you! That's all my frontier is missing

[@Xploring_The_Outdoors]

@@cowboygil760 awesome I like the look of the frontier with that bumper

[@Outdoors4adventure]

Looks great👍 Good job.🙂👍☕

[@Xploring_The_Outdoors]

Thank you

[@AK-ky3ou]

You didn’t paint the upper mounting holes

[@Xploring_The_Outdoors]

Actually I did not everything was caught on camera between batteries dying. All holes were coated with several coats of primer and sealed the upper holes with clear silicone before I inserted the inserts and on the insert itself before putting the screws in. Look at the tape when I peeled it off grey primer streaks on the tape.

[@AK-ky3ou]

@@Xploring_The_Outdoors oh ok, nice job, got a similar lift recently, the readylift version. I like it as it came with bumpstops and camber bolts. Rough country is just as good minus the 2 mentioned parts. Looks great.

[@Xploring_The_Outdoors]

@@AK-ky3ou thanks, I really need to upgrade the shocks soon just been busy building my adventure trailer project for my side x side. Finally heading out to Arkansas for 4 days to go camping and riding.

[@lilyoungjay0000]

What bumper do you have

[@Xploring_The_Outdoors]

ARB

[@SolaOutdoors]

Nothing makes the soul cringe more than the sound of tools scraping painted sheet metal. Good work on the install!

[@Xploring_The_Outdoors]

LOL Thanks at that point I was just praying that hole was in the right spot or at least very close. I still need to get the diff breather kit, I don't plan on driving in deep water but with hurricanes and flooding and that one hole on the trail that you just know isn't more than a couple inches and those turn to feet. better safe than sorry.

[@jonnybkuehl878]

Looks great!! We just picked up a 2016. Wondering how that would work with a fender flare kit. @kuehlkuest