TIMING CHAIN REPLACEMENT MAZDA 2.3 CX-7 CX7 MAZDASPEED 3 MAZDASPEED 6

TIMING CHAIN REPLACEMENT MAZDA 2.3 CX-7 CX7 MAZDASPEED 3 MAZDASPEED 6
In this video we will explain how to remove and replace timing chain on Mazda with 2.3 Turbo Engine. Tjis is part 1 of the procedure. We have the complete video that explains how to install the timing chain and it explains the timing marks in order to replace it. We explained how to replace and remove the timing chain on Mazda CX-7 but it should work on MazdaSpeed 3 and Mazda speed 6 with the 2.3 turbo disi engine since they all share the same engine.
This video may be helpful on:
Mazdaspeed 3 2.3 Timing Chain Replacement. Timing Chain Change
Mazdaspeed 6 2.3 Timing Chain Replacement. Timing Chain Change
Mazda CX-7 CX7 2.3 Timing Chain Replacement. Timing Chain Change
► Timing Chain Kit: amzn.to/2PMNEwd
► Timing Tool: amzn.to/2Mkt3NH
► Engine Sealant: amzn.to/2oKQOpp
► Front Crankshaft Seal: amzn.to/34MyVWg
► Screwdriver Set: amzn.to/34a6r9X
► Clip / Panel Removal Tool: amzn.to/2ZIa03I
► Tool Set: amzn.to/2n2dnpb
► Torx Socket Set: amzn.to/2oBNBZ0
► Reverse Torx Socket Set: amzn.to/2oEEYwQ
► Makita Impact: amzn.to/300c4Jt
► Dewalt Air Compressor: amzn.to/2nVApOq
► Impact Wrench: amzn.to/2nVAOjU
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@blueglovemechanic]

Appreciate the video! It's great that you had that spare engine to reference! Thanks

[@joerichardcycles69]

very good video . . good thing I checked it . . . you saved me from messing this job up . . .

[@keelstaNZ]

Great insight into what is involved!! Thanks

[@smithacazeau7546]

Thanks buddy for this video. Keep up with the good work.

[@jacobyakobian9602]

Excellent video explanation Thank you very much man

[@davoodherbal]

As usual awesome video, so thanks a million. Do you recon the procedure is the same for Mazda 2 DE 2009? I have currently done 143000 miles in the UK and I am intending to do timing chains and oil pump replacement as a precautionary measure.

[@rico1dennie704]

Nice job

[@kevinhancock4064]

Where is part 2 installation? Thanks good video

[@frankpaul3204]

The oil pump chain comes off without having to remove the sprocket.you only need to remove the tensioner arm to do so.

[@romainhubert8882]

There is quite a lot cases of timing belt breaking the motor on CX-7. Does replacing it before gonna prevent the problem on a car with 60000km? Thanks for the answer

[@WaveAction777]

A lot of good information and great camera work to show it. At how many miles/kms should these chains be replaced at?

[@austinsherwood7188]

Around 100,000 miles. Mine failed at 140,000 some go longer some not so long

[@mohammedshafiq4053]

Long as you do serivce change oil on time they should last you all they life mate

[@tylersmity100]

mine failed around 214000 CHECK your service manual!! :D

[@danielslaughter104]

I just bought a dirt cheap 2009 cx7 with 273k miles. Guy said it had never been replaced in his ownership and he bought it at 90k miles. Definitely planning on doing it soon!

[@ffggggggfffcbv]

im getting mine replaced now at 120,000mi

[@_.ZEKI.TSX._]

Hey guys great video, im attempting to do this on my 2011 mazdaspeed 3 next month and im using this video for guidance, if you guys have any other videos available that will help me please 🙏 send them to me

[@kurtisvanwezel8303]

How’d it go? Doing it on my speed 6 pretty soon here. Any tips?

[@Way2EasyDIY]

@@kurtisvanwezel8303 he never replied so that means No lol

[@ismailramlee6611]

After seing this, selling off my cx-7.... 😂

[@pingpong9656]

Can we get a video showing how to remove engine from a CX7 AWD... maybe with and without the transmission would be really interesting.

[@Bearohazard]

Looking for part 2 and can’t find it. Doing this on mine this weekend, and would like to see how to put it all back.

[@jonathansavage9416]

So question what’s the need to remove and replace the top dead center pin and what’s the difference from the old to the new one?

[@user-yu2dw4bj3m]

Hi, I love your videos, they are great! Would you please be able to kindly assist in sending me your link re repairing a Mazda CX7, 2008 2.3 litre turbo Timing chain kit replacement? Do you also have a detailed video re replacing the A/C Compressor and Condenser kit in the above mentioned Mazda CX7, 2008 2.3 litre turbo? Thank you very much in advance!

[@mosley85]

Do you have a video on how to replace the head gasket on this engine?

[@garvinwilliams9101]

Can you make vids of mazda2 Demio 2008 hacthback engine timing and other fixes? Plz

[@andreys6968]

I have a 2007 cx7 I keep getting code for piston 4 miss fire. Last time I look it out it was making a clicking sound in the engine then I accelerated. Do u know what it can be?

[@nunyadambidness1444]

Hi y'all 👋 hey chain was recently done by someone else but they didn't seal it up properly so I'm pulling side cover and resealing everything properly. I did valve cover gasket few months ago do I have to pull the valve cover again to just do the side cover?? Pls and thx I know as I'm taking it apart I'll figure it out but I just was trying to run it through my head first

[@pedropedro5676]

Can you help me i want to know if the 2007 cx7 2.3 turbo and the 2008 use the same engine wiring harness mine is damage and i need to replace it and i want to know if the match thanks

[@aaronthomas7446]

What does the sound make when a cam bearing on a Mazda 2.3

[@raylyndaschilke8686]

Wow great video. How much do you think a job like this would cost? I have a 2007 Mazda cx 7 with 81,000 miles and think maybe it is time to get a new chain to prevent a failure.

[@Way2EasyDIY]

Hope you didn't waste your money. Mines at 196k all original no codes no rattles drives like new

[@raylyndaschilke8686]

@@Way2EasyDIY we put a new oil filter/ cooler and it stopped the leaks. At 100k now but this Mazda is really the biggest cheaply build piece of crap we have ever owned. Gonna run it to death tho. Horrible uncomfortable car but it's cool to park anywhere and not give a damn what happens to it 😂😂

[@Way2EasyDIY]

Tbh I love mine lol. Got it for $320 at auction and that was 2 years ago I've only put a valve cover gasket and oil changes no other issues. I too will be driving mine into the ground haha!

[@Bearohazard]

The shop told me it would cost more than the car is worth. I went on eBay and got all the parts for about 250$. I’m going to do the job with almost no power tools too. Wish me luck.

[@josem801]

NOICE

[@waheedmohamed3312]

Hi guys. Can you help me to fox my car belt tensioner? When i trying to change the belt tensioner, the upper screw is broken. Can you tell me how to remove the rest of screw or bolt pert from engine? Or how to fix my problem? Please let me know as soon as possible. Thank you.

[@myPPPLab]

kit will fit 2006 Mazda 5, 2.3??

[@edwardburke694]

I have a question for you guys my Mazda, CX seven has an issue where I’m getting one spark one pulse but that’s it. It will not start. It turns over I seem to lost power or somewhere but I don’t know where could you help a brother out?

[@KNBSTUDIOSTV]

Hey nice work but I need to know where dose the lock washer go on a timing chain

[@tylersmity100]

what lock washer? the friction washers?

[@chalinoahuesoduro5566]

Why are you replacing the timing chain? What were the symptoms?

[@Marshallbuttholeman]

Couldn’t find the next video of the replacement

[@mohammedshafiq4053]

Do chain job on mazda t2 mate plz thankyou

[@JeffreyJamesLippold]

at 13:30 the little metal cap piece fell out. Same thing happened to me. How do you replace it or reassemble it?

[@modeljetjuggernaut4864]

R&r timing phazer sprocket

[@marlonbaird6070]

Hi I have Mazda MPV 2.3t with 145000km when should I replace the chain

[@modeljetjuggernaut4864]

So... Part 2? Or do I keep missing it?

[@michaeltekle7228]

Do u hv branches East london. I want to bring my car

[@kennedychanda9961]

Iam having a problem with my car which is Mazda model:mpv ,engine L3,I want a good second hand engine,do you people have them?

[@akaitv6606]

The upgraded chain and cog package from 2012 is much better

[@platin2148]

This doesn’t work for the german layout/2.2l of the engine it’s quite different. Neither the sensor nor the pin position is the same.

[@ramontapia1414]

Si ala madre de los anuncios 6 anuncios corridos para ver un video

[@vicentechavarria8383]

Hi gays grettins from Monterrey México, I SEE all yours vídeos, I need You help, I need replace the retainer ir the cober the crankshaft one's Mazda cx7 2.3 L 2008 I hope for you comment abaut. Sorry for My English write.see You and meny grettins for you.

[@deionduenas5201]

Do I have to replace the oil pump chain to be able to replace the timing chain?

[@tylersmity100]

no :D

[@mechanicstopsecrets1718]

How many miles do you recommend change the timing chain and turbo charger and VVT?

[@mechanicstopsecrets1718]

Thanks

[@duaneafields]

70k if you already dont have problems. short drives kill this type of engine turbo setup. change the cat and o2 sensors too while the turbo is out.

[@sethkahny3663]

Most people tell me to get oem not aftermarket

[@mechanicstopsecrets1718]

Привет как часто нужно менять?

[@roberttucker115]

80,000 - 120,000 miles. I don’t know in kilometers

[@GDeats-bo4rj]

remove lifter without move timing chan2005 mazda tribute2.3 liter

[@user-ot3fm2bz1h]

How do I get. Masda cx7 good mechanic in Nigeria please help m with the contact.

[@uglahhmane]

Starting to seriously question this guys aptitude by the way he was leveraging that breaker bar on the mount lol

[@garretgillespie3946]

That was cringe worthy indeed.

[@michaelwhittington1522]

Don't see the tools to hold cams or for tdc

[@modeljetjuggernaut4864]

Yo, I noticed that when replacing my vvt phaser, the crank tdc bolt and the fixture for the camshaft are included

[@kickbackentertainment4466]

I bet this car still don’t work all these videos 😂😂

[@emilivanov8507]

хахаха , гледам някой носи мартеници :)

[@shadetreemech290]

You could do with better editing. Cut out some of the dead time. For instance, you need not show every turn of every bolt.

[@ekiscruz5142]

what are the dimensions of the crank shaft bolt stopper