Timpano TPT-3000 Amp Dyno and Overview

[@luisvillalobos4976]

Tímpano has gotten better since the amp blow outs on Big D Williston channel. People are now doing stunt walls and just big builds with Tímpano .

[@luisvillalobos4976]

I am ordering Tímpano now as well. Big thumbs up to sound quality over these over priced big brands. Tímpano is a winner best bang for the dollar

[@TimpanoAudio]

This is a new Improved model from the previous one - But truly the amplifier was never meant for bass tone test, it is made for stunt walls and customer doors like you mention!

[@michaelfessenden8601]

You're right it should do what it says full range. Dyno videos are great to look at before purchasing an amp. Smart consumers want the truth. If they are sore, how an amp failed, it may because they purchased it and have it running. They should take it as info on how to use the amp. Mids and highs. Or run it at 4ohms

[@hellaflushhonda]

2,000 watts at 2ohms for less then $200 on an amp is awesome, yes ratings are kinda weird but this amp SLAPS!

[@aceman5125]

That might be a new " Budget King"!😎👍

[@leung619]

Persons with stunt walls are buying 3000 watts amplifiers to play mids and highs. In the Caribbean we use upto 8k to play midbass

[@TimpanoAudio]

Corrected, usually a 3000 Watts amp is use for Tweeter or drivers and a 8000 watts for mids

[@forged_billions2]

Class D for mids and highs ? Or channel amps ?

[@sameermohammed3949]

Why so much power? My installer asked me to get to play 4 8s at 130 rms. Why so much extra power

[@sameermohammed3949]

​@@TimpanoAudioWhy so much power? My installer asked me to get to play 4 8s at 130 rms. Why so much extra power

[@rubenflores2870]

I was wondering if you found the jc power amplifier rs-2400 or 3200 watts

[@jessewaits5042]

Did you have the gain maxed out all the way or half way

[@stereomojo]

@@jessewaits5042 half or less. I never go more than half

[@jessewaits5042]

@ that crazy

[@AceBase5]

Could I use this on a single dc audio lvl 3 12 dual 2ohm sub

[@MrPipe60]

You haven't been to Florida lately lol 3k on mids and highs is nothing for us stunt wall guys

[@jessewaits5042]

Would you put this on a single 12

[@stereomojo]

@@jessewaits5042 which 12 do you have? What ohm load would you be at? This is most likely too powerful for a single 12.

[@jessewaits5042]

@ deaf bounce machete 2400 can handle 6k all day

[@jessewaits5042]

An the 12 is at 1 ohm

[@Zachecker]

Are you in the Birmingham area I swear I’ve seen this on marketplace

[@stereomojo]

I live a little north of Birmingham, in the cullman area

[@stevemaniaci4750]

Can you do a dino on one of the sound cubed.maybee the same size as this 3k

[@csj9619]

Taramps: for subs: BASS series, SmartBASS, MD series or BigBoss series all others (as far as I know) are for mids and highs

[@stereomojo]

I’d like to try a big boss or smart series

[@Mr.boxxchevy]

​@stereomojo i have it and like it

[@vidalfernandezwtb9003]

@@stereomojoi have a big boss and I’m switching to jp23v2

[@BeatsByGRIMM]

Great Video!!! 👍👍 I think PRV owns the Timpano line.. I just got 2 of the PRV Audio QS3000 1Ω for my Mids and Hi's.. I Wanted to have one Dyno'd but I'm a little worried it may not survive the battle

[@stereomojo]

I’ve thought about trying that amp

[@ChrisAzure]

I have this amp. It's definitely not a good option to use it for bass, I did it and ended up using it for mids, and that's where it shines.

[@wavycrockett4261]

Works for me I dunno what you're talking about been pushing for about 5 months no problems yet.

[@ChrisAzure]

@wavycrockett4261 I didn't say that it doesn't work as a bass amp. In fact I've used it with my 2 Kicker CVX 12" for 2 months, it isn't the best option for that. There's a Bass model that does it better. The negative side is that for some reason, two amps look the same, but the Bass model is way more expensive for some reason.

[@TrunkThunderLithium]

Please dyno the slapz audio shock 3k or 5k please!!!!

[@clipciti6977]

I would like to see a corzus 3k 1 ohm version

[@SheikhN-bible-syndrome]

Ive got the 2ohm and its freakin powerful

[@clipciti6977]

@@SheikhN-bible-syndrome I had a 1 ohm version and never tried it before I sold it. I appreciate it

[@beemackin2316]

Nice 1

[@johnnyditommaso6807]

I wanna see 1 ohm certified

[@robcooper3171]

@Stereo MoJo Try the prv amps, ones people would typically buy. 500 to 3k's Another thing to note and you could potentially capitalize on it. Taramps particularly has like 5 different series of amps for almost all power levels. Maybe do a multiple part video explaining the differences between for instance. MD1200 HD1200 1200BASS think there is a couple others, just on that 1200 chassis/platform.

[@mester84]

The flat button is because the are running them with DSP in the CHIPEO scene

[@neftaliperez7705]

Next Timpano 8000.1 (2ohm)

[@stereomojo]

@@neftaliperez7705 whew, a big boy!!

[@basshead30]

👍👀👍

[@truey-yt4039]

Okay your testing for bass go to put them in a 10mid bass will sound clean at the proper tune

[@mester84]

I got a 8k for 6 10” midrange and a 5k for 4 10” midbass and 3smart for 2 12” subs

[@yougod7253]

Timpano amps catch fire. Warning Will Robinson.

[@annihilationindustries1990]

those SMD meters are known to mess up and give false numbers. look up parker the basshead . Once the SMD dyno hits clipping it can sky rocket

[@Lov3Hertz]

90 percent of full range amps are tested using 1khz toned do research

[@stereomojo]

Multiple channel amps, yes. Monoblock, not so much. Sometimes I’ll do 1k and 40 both.

[@tobbybrayden2578]

Lol I run these on neo drivers all day

[@stereomojo]

That’s cool

[@elite_shadower_6057]

Do not put it on a resistive bank and Dyno it cause that will blow it because your not gonna be playing a speaker at 1 consistent ohm load

[@eighty3boxchevy]

I got a 3k for my mids alone 😂

[@stereomojo]

That’s cool. What do you have for subs and sub amps?

[@eighty3boxchevy]

2 Sundown Xv3 15s ​and a timpano 8k @@stereomojo

[@stereomojo]

@@eighty3boxchevy cool!

[@jmotafitmotivation8705]

Use the timpano 3000.1 BASS amp, this isn’t for subs

[@richardperez1899]

so.much negativity and did not do the full testing that amp preformed adequately I would like to see what it will take to reach its limits that is why you do these videos?

[@jasonhernandez980]

It's a piece of crap if it can't even do certified.

[@Lov3Hertz]

Understand the amp and what it's purpose is before you comment on what it does. Or doesn't do, These were made for midbass and highs they aren't spl bass amps anyone who knows amps knows full bridges aren't for that so make some quality content Based on what you know

[@stereomojo]

You’re out of touch with what most people are doing with these. I get what you’re saying, but that’s not what people are doing.

[@Lov3Hertz]

When you're looking for an amplifier for your subs do you head toward a full range amplifier or a mono sub amplifier? The midbass speakers these are meant to power have a program power of 500-1000watts so that power wouldn't even be sufficient for more than 4, I have 18000 watts in my midbass section and 4000 in my bass section and I use a class D subwoofer amp crossed over at 80 hz and a bandpass at below 30hz check the manual to see how they rate them and what frequency they use to get the numbers, they don't lie they just test them for what the purpose is

[@stereomojo]

@@Lov3Hertz have you been asleep for the past few years? Most people buy these amps for subs. I get their original intended purpose, but that’s not what people are using them for. Not very often anyway.

[@351turn]

Please do an amp DYNO for what that amp is intended to do PRV audio group/Timpano, are mid and highs company that amp was not designed for 40 Hz tone whatsoever.. if somebody is buying that full rage amp for subwoofers, they need some serious education on car audio.. testing that amp at 100 Hz or thousand hertz it will do it’s rated power all day long and possibly more, that amp was designed to power, multiple compression drivers or a multiple mid base or mid range speaker set up

[@stereomojo]

@@351turn why do the filters allow it to go to 40 if the manufacturer didn’t intend for it to go to 40?