Seems like some extra steps. If you duplicate the box half with the pins. Align it with the top the way it was before you flipped it. Then make the dupe'd box with pins a hole. Use that hole to cut out the pin holes in the other half. Much quicker and almost no chance of miss aaligning the pins. Thank you very much for the video though. I learned the hide feature so I now understand how to select hidden objects. Extremely helpful.
@alanf7190 Жыл бұрын
Great video! a little hard to concentrate with the background noise though.
@CJWilson-uw6uo5 ай бұрын
This video is so helpful. Thank you for this quality content.
@malaysiaforyou9513 жыл бұрын
Great . I used to a 3D artist/animator too. I can so resonate with this . Greetings from Mindful Multiverse 🙏🏽🌱
@avramplager19533 жыл бұрын
Thank you! I'm so happy to see positive remarks and I wish you the best
@ZipperGames-ss3gp Жыл бұрын
Am I missing where the pour hole is?
@electricconnections937111 ай бұрын
Thanks for the assist, really needed it.
@davidbarlow16966 ай бұрын
You need to make the holes for the pin slightly bigger
@guncla3 ай бұрын
Probably also some bevel on the pin edges could help too.
@VRShanghainese3 жыл бұрын
great video👍
@avramplager19533 жыл бұрын
Thanks! Stay tuned for more and share with your friends and family
@philippef31102 жыл бұрын
Thank you from France
@michaelzimmer48502 жыл бұрын
Sweet video!
@lauraarias4222Ай бұрын
Any tips how to not make a box but same shape object (just a little bigger as a housing for the object? like an exterior not too thick with the same shape and adding supports.
@1darksmart2 жыл бұрын
Thank you. This was helpfull .
@voornaamachternaam37133 жыл бұрын
Thanks this helps a lot, but with a shape like an icosahedron how would you make a hole to pour your mixture into? Since it has a pointed top a cilindrical hole might probably ruin that pointy top feature or would it not? if so what would you recommend instead? thanks again!
@avramplager19533 жыл бұрын
Glad this helps! Would you mind emailing me this question so I can respond in more detail? It requires the extrude tool from fusion 360 with "extrude from object" selected. I can send you screenshots of the process in a couple days as I'm getting windows loaded on my PC and I'll be about to run fusion from there. Thank you for watching and have a great day!
@ashbrown12122 жыл бұрын
The pins need to be slightly shorter and smaller diameter than the holes, 0.2mm maybe (OR the other way around, the holes slightly bigger than the pins).
@avramplager19532 жыл бұрын
Good note however, i would recommend doing that in slicer settings since it is preference based setting and not a mechanical component. Thanks for commenting!
@RyanBarnes Жыл бұрын
@@avramplager1953 what slicer are you using that lets you enlarge or shrink just the pins?
@MrAlden878 ай бұрын
I know this is an old tutorial, but I pretty much followed these steps, ensured my holes were the exact same size as the pins...ad they don't fit... will making the pins a fraction of a mm make that big of a difference or should I just file them down and handle it that way?
@guncla3 ай бұрын
When printing or using cnc machine, it's always important to calculate some tolerance (usually a difference under 1mm between pins and holes on a FDM printer) to make them fit. A little bevel on the edges of the pin could help too
@crispychicken27433 жыл бұрын
How would you fill this mold . How would you get all the air out ?
@avramplager19533 жыл бұрын
Air can form through bubbles and escape through the pour hole in the top.
@delheidia503 жыл бұрын
Avram, great video, been trying to use it for a couple of weeks for my project but always come across a problem at the 4:20 position, can I contact you about what I might be doing wrong
@avramplager19533 жыл бұрын
You're more than welcome to contact me anytime. My email is listed in the channel bio
@wilmermartinez3054 Жыл бұрын
👍👍👍👍👏
@gsegallis7 ай бұрын
I tried to watch this, but the music was so effing annoying I just couldn't go on