🎉Congrats on 39k subscribers! Your channel is truly worth the watch!
@eggrolll Жыл бұрын
Crazy! He was at 20k not very long ago.
@aaronpowell4885 Жыл бұрын
Wow! Those are some crazy numbers for stock. Surprising that they're as torquey as they are!
@bangpchannel354 Жыл бұрын
Stihl chainsaw with high quality, strong power 👍
@tdawg8605 Жыл бұрын
Always a pleasure to watch you channel. No saw work today for me, had to do the water pump on my truck today. Oh well. Thanks for all you do. TC Mahalo Tinman 🤙🤙🤙
@ronsilva516 Жыл бұрын
Hope your staying well and hope your baby doing well and your wife keep to the saw build up👍👍😎
@longbar185d2 Жыл бұрын
Tinman the information you let the less of us into is awesome! If I’m ever in your neighborhood, look out buddy cause I’m stopping by! Love it!
@engineninjaChris Жыл бұрын
Wow!! That is some long blow down. Can't wait to see where you go with this one.
@paulmcreynolds1774 Жыл бұрын
Another great video Tinman. I can't wait to see the next steps. Keep up the good work and stay safe.
@Penri1215 Жыл бұрын
Hi, very interesting . I cant wait to see what the end result. The only bit of advice I can give with these saws is always use genuine bearings and seals. Just keep doing what you are doing.👍 Tim
@danielzukeran7625 Жыл бұрын
Thanks again tinman and I always enjoy a front row seat in the saw shop class! Ground my 266 cylinder and went waaaaay to far on the transfers 🤣 but I think it’ll be okay.
@michaelmactavish4445 Жыл бұрын
stihl i got the ms250 wich useing it for wood clearing and its powerful 45.4cc love it plus nice my stihl saw uses same spark plug from my km56r
@tinmanssaws Жыл бұрын
I had an 025 for years. It was a great saw.
@aaronpowell4885 Жыл бұрын
I know they're a plastic clamshell homeowner grade saw but I've been kinda wanting to add an ms250 to my fleet! Talked to my local dealer last Friday and supposedly Stihl has discontinued them but... they're still available🤷♂️ either way, I want one before I can't get a new one. Dealer didn't have any in stock. Should be in next 2 weeks!
@edwinburns4785 Жыл бұрын
I just happen to have a 200t. I guess it will head to the bench and we will follow along. Should be fun. Just in time for spring. Can't wait.
@nateolmsted899 Жыл бұрын
Lots of hickory here in Michigan. It takes a real chainsaw to cut wood here.
@billybobswood8153 Жыл бұрын
another great vid!!
@awardfoto14 ай бұрын
Try Rooibos tea from South Africa. Its great for the stomach. Got some natural Zinc in.
@_JamesBrown Жыл бұрын
Funny timing. Just picked up a 010AV non-runner and want to give it some TLC
@chrismuncey3861 Жыл бұрын
That's a good looking axe hanging up there 🪓
@justinweaver8107 Жыл бұрын
Gonna be a sweet lil saw when u done wit it.
@AaronTheViking250 Жыл бұрын
the Okanagan is unique for its stands of timber. because some areas have a mix of hard and soft. Then other areas it has nothing but hard wood so i find its kinda a toss up to be honest.
@michelpicton8357 Жыл бұрын
Hey tin man great content as always
@charleshorton11486 ай бұрын
I have 020 super and trying to get some knowledge on it. Right now i would like to goto a 18" bar. Friend had a couple old 18" bars to see if it would fit. No fit, what am i looking for.
@conormichael7964 Жыл бұрын
Hey Tinman, I just converted an 038 super to an 038 mag. I have an OEM 038 cylinder and piston that can be mounted to a mag by enlarging the bolt holes. It’s yours if you want I can send an email. Cheers buddy
@justincameron5930 Жыл бұрын
That's a big bar for that saw.
@davidcarberry3547 Жыл бұрын
i seriously want one , prob blown up , but nice to use one hand
@gagestreeremoval Жыл бұрын
i have a question on the echo cs 590, im getting into porting saws and i ported my 590, i raised the exost port from 113 degrees atdc to 103 degrees atdc, so i was wondering how high i should raise the transfers and how to get my transfer numbers. please and thank you.
@christopherandkathrynmorro9357 Жыл бұрын
Hey Tinman maybe you can reach out to your friends at Rip Saw I think in one of Buckins videos he said that Rip Saw is known for there 200t maybe they can help you with the numbers
@mattammann3833 Жыл бұрын
Hey I am currently in the process of a full rebuild/port clean up on one of these saws. 2 Questions I'm hoping maybe you can answer, #1 the saw has an older 020 carb with no accelerator port. Are these better? Or should I opt to pick up a new OEM stihl carb with the accelerator port? #2, I purchased a Meteor cylinder and piston kit, and for the life of me I cannot get the new wrist pin into the new cylinder. Is this normal with these? I thought they should just slide in with no force. Love the content, hope you can give me some insight! I will be following thus series for sure!
@alotl1kevegas860 Жыл бұрын
Do you mean the wrist pin in the piston? Or the piston in the cylinder?
@mattammann3833 Жыл бұрын
@@alotl1kevegas860 the wrist pin connects the piston to the rod
@alotl1kevegas860 Жыл бұрын
@@mattammann3833 Yes I am aware, I wrench for a living. To be fair you said you couldn't get the wrist pin in the cylinder.... so I was a bit confused as to what you were trying to do lol
@mattammann3833 Жыл бұрын
@AlotL1keVegas that's totally my bad I was half asleep when I wrote thst comment I didn't even realize how badly I mistyped that lol
@alotl1kevegas860 Жыл бұрын
@@mattammann3833 It happens lol. Put the wrist pin in the freezer over night, then try fitting it. It should pop right in 😊
@jyoung3219 Жыл бұрын
Hey tinman please could you do a video on your 044
@alotl1kevegas860 Жыл бұрын
If you wanted to build a 200t I would of sent you mine 😜