Stihl 038 magnum, I'm getting this clutch off no matter what!!!!

Stuck clutch reveal on a 038 magnum.
pto side crankseal removal made easy.
thanks for watching.

[@brendanthebattlerstafford5145]

Found a bearing with the smallest amount of play on an 046 today and the cage had deteriorated. A couple of hours later I watched your vid and had a chuckle. Spot on Tinman 👊

[@rons3736]

Mechanical Engineer Proverb: The solution is finding the right size hammer to hit it with. In your case, an air "hammer"

[@brendanthebattlerstafford5145]

Thank god! Didn’t realise I suffered from OCD until you fixed that dog.

[@bryanb5413]

The clutch removal cliffhanger form the last episode kept me up last night... Here's to a better night sleep tonight... CHEERS. Many thanks!

[@bobbrant7847]

You do real good work I like the way how you show how you fix the problem things no body else does that. What I like was how you got that stuck clutch off that 038 Stihl.

[@stevetheriault4164]

IVE PUT THE SAW DOG IN THE VICE TO HOLD THE SAW IN PLACE , AND GRABBED A 1/2 inch 2 foot breaker bar WITH 3/4 socket works good ,always removes stihl clutches for me,for the crank seal so it doesnt prolapse the lip ,you can cut metal from a pop can ,and roll the metal like a cigar ,so it will slide over the crankshaft end for the shim ,then slide your seal down works good,great job TINMAN

[@brianbutcher8216]

Do yourself a favor buy a dewalt 1/2 inch battery impact and just leave a spark plug in it and it brings them right off and they are handy as hell for changing tires or anything

[@jackjamison3816]

Honda crv👌 can't go wrong

[@jordanwickizer575]

i had a stihl come in today with a bad oil pump. i was at my whits end with the clutch not coming off. i will definitely try this!

[@Joe2328]

I have a 3 foot length of scaffolding pole that I slip over the end of the socket wrench - leverage wins every time!

[@joutdoorsmen23]

Thanks Tinman, for all your knowledge and info really appreciate and continue prayers for you and your family!!!!!!!!!!

[@larrywarner9314]

Tinman is replace those springs on that clutch to be safe , they loose there strength after getting hot like that

[@tdawg8605]

Good stuff as always. Glad to see the house is coming along. TC Tinman Mahalo🤙🤙🤙

[@oceanheadted]

Ooh I had the socket dish problem that weekend, thanks for the tip

[@mikeremski2102]

Nice hearing the house is coming back together. As for new vehicles: you're going to wind up with whatever is actually in stock.

[@sandsock]

We have just started seeing trucks for sale in several yards. It's almost time to buy

[@74willy81]

One reason the impact did not work is that without a solid stop and hit an impact wrench is largely ineffective. An impact wrench works by using solid mechanical blows. The rope in the cylinder acts like a cushion softening each blow like a pillow. Driving a press fit pin into a hole always works much better when backed up by something solid and hardly at all when placed onto something soft and spongy. Same principle here.

[@imperfectcuts7028]

Love the content as always tinman. Can't wait for the next portion

[@johnarnettsways.8758]

Nice fix tinman. I will remember that one. Appreciate it ❤️🌲🪓👊🏻🙏

[@justinp7687]

Bought the Stihl tools a few years ago several different sizes but makes it much easier.