!! Early morning saw work!! Found the airleak in Hogans 266xp

[@Chuckrussell75]

Hey dude, I'm not going to ask for you email in here, & I don't remember if you rattled it off ever. I feel like you get enough wild emails probably. So Anyway, for you & Everyone else that it might help, I buy my 2-300 series Husky oil pump o-rings from McMaster-Carr. $26 for 100 ct. Like, I will Never go thru that many, but talk about a huge savings eh? So well anyway, the description you'll need is "Oil resistant Buna-N O-ring 1.6mm Wide, 29.1mm ID 926k668". I forgot to tell ya that one the other day when you were working on the Farmertech/Holtz kit saw. Toodles.

[@tinmanssaws]

Thankyou that's great info. I wonder if they ship to Canada?

[@Chuckrussell75]

KZbin keeps doing weird sh*t on my end with my comments. So like 3 times I wrote, yes, they do ship to Canada. So lets see of it sticks this time.

[@kbad1225]

Good job on the no smoking, I quit cold turkey 27 years ago from 3 packs a day. I had twins on the way. Being a dad is way cooler than being a smoker.

[@justinweaver8787]

Congratulations on ur 27yr achievement!

[@foxbody_ssp9768]

Hell yeh 👍

[@joebrent2762]

Just came over from Buckin's ....... Awesome job on the saws!!!!

[@rickhamm3962]

Yes quitting smoking is tough. Sometimes after quitting I had a tendency to eat more than normal and it showed up around my belt. Good luck takes a lot of willpower. Great information on your Channel.

[@mmg6282]

Good on you! I was a 2 1/2 to 3 ok a day guy. Nasty friggin habit. You are much better for it and not to mention the cost. 👍🏻👍🏻

[@michaelmeyers1827]

Good luck to both of you on the birth of your new addition

[@glenspryszak6005]

You will feel fantastic 1 year after quitting smoking. I cold turkey'd in 82.....NEVER had a puff since... I swore I would never pay 2.50 a pack... and I never did. You are doing it.

[@rhysfirth3506]

$2.50 a pack? USD I guess? Google says $2.50usd is $7.41 USD today. I was living in China 2011/2012 teaching English and smoking a pack a day of cheap 7 RMB ($1 USD a pack) Chinese cigs. Left China to Hong Kong, $55 HKD, (7.15 USD in 2012 google says) and home to NZ and packs were $25 NZD (21.25 USD in 2012). Once I finished the last of the Chinese cigs, I just never bought another pack. Cold turkey and not smoked since. There's some big price shocks just crossing borders!

[@ToddAdams1234]

“I know just enough to be dangerous”, I RESEMBLE that remark! 🤣

[@billbyng3347]

Love the channel, learn something new almost every episode

[@ErickCook89]

Keep up the good content. Love all that you do. Great mentor.

[@auzzyash9656]

Hey timman... im 14 weeks in since giving up smoking my self... keep up the good work bloke!

[@Desert_Hobo]

our first baby (have four now) put life in perspective and I put down the smokes for good. keep at it, Tinman. you got this. now you got more time and money for the family, and saws 😅

[@timidater4803]

Keep rockin Brother!!! The insomnia happened to me too, plus I was a basterd for a month!! My wife bless her heart put up with it!!!

[@uittyman]

You got s thumbs up for not smoking lol... well done

[@tazman-kennyfuller]

Great tear down Tinman. Always learning new things about getting them apart. Look forward to this rebuild. Congrats on quitting smoking buddy. Love it 🌲❤️🌲👊🪓

[@jeffc9354]

Great video congrats on not smoking

[@majorpixchannel7146]

Love the content!! Found your channel while waching iron horse 🐎! You guys have inspired me to start working on. Saws! I'm a chainsaw Miller on a pm14 norwood and I have a g372xp that I bought used! Also run a 590 timber woof stock! Thinking of starting a channel myself about chainsaw milling! Very inspiring... and wood love any advice when it comes to best saw for my mill! Thanks my friend

[@majorpixchannel7146]

@Darin Ritter yes sir, I just turned 4k subs last night! And I still answer all my comments 😁 Thanks for finding this... it's always a good reminder of what we started from!

[@skravlesen]

The day always approves when there's a new episode of the Tinman Show😁

[@gordsmith7708]

Hi there Tinman ,you can try a natural solution called melatonin you can get it at a health food store in powered form . You can also find it in pill form at a drugstore. Hope all well with you and your family. Keep on keeping on, cheers.

[@gregyoung7882]

Good for you best for you and new family

[@georgesmith5624]

Top man on the no smoking

[@fatmattchopshop3620]

Thanks!

[@tinmanssaws]

Thanks Fat Matt!! You're a wild man!!!

[@shaner67]

Tinman, good on ya for putting down the darts. I'm almost three years done with the habit. You can do it for yourself not anyone else. Stay strong and avoid the temptation when you are at the gas station or convince store. You got this brother.. 👍✌️

[@tdawg8605]

Can't stand it when you spend more time pulling than cutting. Had a saw like that once. Through it in the bush and it stayed there for two days...lol. eventually retrieved it and figured it out and we made up...lol. interesting to see the critic on the 266's. Thank you for that Tinman Mahalo 🤙🤙🤙

[@charliefryer5184]

Happy to hear you're still smoke free brother. Life will smooth out as time goes by sleep wise. Stay strong! Charlie

[@pegleg1972]

keep up the insomnia man, it will pass in time, so don’t give up. nice to see you cleaned up for your wife and upcoming family. thanks for the spot on informative vids and the inspiration for others ✊

[@0808dsmith]

Been there Tinman! Smoked for 30 years. Put them down 20 years ago. Not a day goes by that you don't want one! Stick with it brother!

[@antoniomorgado5304]

keep up with the saws and no smoking!

[@transdimensionalist]

congrats bro , stay awesome

[@Chuckrussell75]

Words.

[@tinmanssaws]

Thankyou Chad!!

[@fatmattchopshop3620]

The Tin Solders uniting!!

[@mikedaugharty5544]

Congratulations there are 10 men I'm not quitting smoking it is a it is a tough thing to break I did it with God's help and he took care of me never look back at the nasty habit that it was and costly and I quit in 85 so things have gotten much more expensive since then so you'll be much better health wise bless you

[@littleredreiner6446]

Just over 1 year of no cigarettes here... first three months was all about finding new healthy habits... good on ya!!

[@thebegrsshow]

Tinman, I don't know if you have tried tis yet, or if you are even going to try and repair the impulse line, but I have had success by taking 1/4" copper tubing and using any size die that will make threads on the tubing without cutting all the way through it, and then tapping the hole in the cylinder to match it. I then take JB Weld and thread the tubing in with it to lock it in place. You can take the brass nipple that was the original impulse nipple, and solder it inside the tubing. I have done this on carburetor base plates also that have had the vacuum line nipples broken off. Just a trick you might try when you are in a jam.

[@brendosghanasenditsaws]

👌👌👌 keen to see the 038m in some wood buddy I have an early farmertec 038M with serial numbers and a oem one I want to port one for our Aussie sawfeast cutting competition so I’m awaiting the day it hits the timber

[@pm270100]

no smoke well done

[@luke8210]

My 038 is a real sob to start. Once its running its top notch. I need to go through it one of these days....

[@markw2266]

If you clean up that cylinder good there is a low temperature aluminum solder that may cover that hole up. You can probably find so content on YT for the product. I think HF has the rods.

[@ChrisLascari]

Hey tinman. Thanks for more great content and congrats on quiting the smokes. I know it is hard, j7st don't give in to the urges

[@erichiles9568]

I have two o38 stihls the pistons are 48mm is this factory bore

[@jakegorman7121]

Hey Tinnman! Please take a look at Alumaweld or similar products. It can be bought at harbor freight or similar can be ordered. It is a fabulous material if properly prepped and heated. Think of it as brazing for aluminum that cools much harder than aluminum.

[@ambrozklopcic9092]

Hi Tinman All your wideo are great.Can make one compare video regarding 266xp and 266 which is not xp. What are the differeces. Best regards Ambroz from Slovenia Europa

[@joescott803]

Awesome news tinman. Keep it up. The withdrawals will subside and you’ll feel brand new. Try cbd for nighttime. Tea’s gummy’s whatever to relax. When the baby comes you’ll need your rest

[@martinmicheal4595]

Tap it and plug the impulse port

[@rogerford4427]

Agin, best to wife and you 😇🙏

[@imperfectcuts7028]

Love the content as always tinman. Be Interesting to compare it to the other 266 builds that you and ironhorse have done.

[@powersawtomfoolery6739]

Tinman, I quit drinking 8 years ago. I'm 45 and feel better now than I did when I was drinking heavy. Stick to it! It's worth it to stay off the habit!

[@barryduckworth5224]

Get a hold of a Loctite rep and explain what you want to do. They make a product to put that nipple back in and seal. It won't be cheap, but would be better than junking the cylinder.

[@rogercrouse5531]

hard starting is Tank vent or Fuel cap

[@pm270100]

ya better have a coffee

[@tinmanssaws]

Thankyou billy boy!!

[@timcowger6318]

3M makes a great product for metal bonding body panels on vehicles, I have used it myself with no issues, actually used it on radiators in trucks (and not the plastic part) Maybe a fix for Hogans air leak?

[@careysoutherland8291]

i pull the impulse on that cylinder tap it for a small pipe plug and get some yamaha bond or a good sealant. pop the plug in and push it into the transfer port and grind it smooth to the port work. i think it would work.

[@sneff3407]

Same here i am a Tig welder i would not weld the hole shut . Drill tap pipe threads.

[@thebradleysoncatbirdhill6849]

Honestly, if I were to add up all of the education I've gotten from you over the years, it would equal at least 2 degrees from a technical college!💪👍

[@justinweaver8787]

U are correct on this world needs more hard workn boys nobody wants to work anymore

[@sandsock]

What is the difference between a fuel line and a impulse line? My 361. Only has a single fuel line .

[@vintagesawyer6246]

the impulse line provides the pulse to pump the diaphragm in the carb that pumps the fuel. Your saw gets its pulse through a port or hole in the carburator manifold flange which is connected to the crankcase.

[@sandsock]

@@vintagesawyer6246 I thought it was just vacumn from the exhaust. That pulled it through to the cylinder. Thank you.

[@rydplrs71]

Drill it, tap it and plug it. No welding necessary.

[@royfoote6277]

Hey buddy, maybe you can answer this question for me. I have an 09 372xpw thats complete and runs good but the front lower recoil thread boss is broken off the case exposing the flywheel. I have a new holzforma 372 case that I believe is 08 and older. Will it work on my xpw?

[@davidmech2956]

Maybe you get some crank seal holders 3D printed... just food for thought....

[@anthonyjoannou1019]

Tinman have you ever ported a 262XP thats a Hot saw Tj

[@tinmanssaws]

I've owned a 262 but never ported one.

[@4EverDead04]

I can’t be the only one that paused the video several times think they had a cricket in there house till tin man mention them in his video lol

[@tinmanssaws]

My shop.is full.of them.right now hahahaha

[@travisweldmaster7815]

Tinman brother if I could get my hands on that jug, I'd weld that in and use potentially a threaded hosebarb after tapping the hole back or just straight up tig-braze that copper to aluminum and I dont want to hear one comment saying I cant do it.

[@vintagesawyer6246]

A friend of mines dad was an aircraft tech and expert welder and he said he could weld shit to the sky. And I think he could.

[@travisweldmaster7815]

@@vintagesawyer6246 I believe him

[@travisweldmaster7815]

I know this all sounds really cocky and what not but that really isnt me or my angel

[@travisweldmaster7815]

@@vintagesawyer6246 stitch everything from a broken heart to the crack of dawn lol, or if I can jump across it itl weld lol

[@karlsloan]

Hello. I would hope you could help me with my chainsaw. I work on chainsaws but not to the extent that you do. I do general repair etc. to get saws back to original working. This saw that my neighbour brought me is a Husqvarna 66 and it will not start. Compression is 90 psi. I removed flywheel and the key was sheared(gone)And a chunk out of the crankshaft. I installed a new key and still no start. I’ve put gas directly in the cylinder no start I have put ether Quickstart not even a cough. I feel that the crankshaft is twisted. Is that possible? And if so what would be the proper advance timing and at what rpm. Hope to hear from you thanks in advance. Karl.

[@gabrieltravis6121]

? could you tap the hole and put a bolt with lock tight to block the hole. Just a thought. Thanks Tinman!!!

[@tannerjossi1196]

Is that a new husky gas cap on that saw? Do you know if they work? Or was it modified?

[@johnnyhomegrownholmgren9999]

The new caps will fit. 👍

[@tannerjossi1196]

@@johnnyhomegrownholmgren9999 Awesome, Thanks. That is one of the things that bug me about my 266.

[@adamlagace2485]

Where do you buy those gas cap and oil caps tinman

[@h200z]

Was thinking - that in cylinder line fitting needs to be threaded into that cylinder rather than JB welded..

[@aaronpowell4885]

Great thing to be doing early in the morning👍 ironically, I'm naturally a night owl but LOVE mornings!🤪 I'm slowly but surely moving my bed and wake times back. Go get that second cup☕ you deserve it!!

[@kurtsteele5587]

If you can find someone closer send me those cylinders I'll weld them up for you

[@thebug4046]

Hey man just got a 372xp for free with a bad top end! Not looking to make it crazy but any upgrades would be appreciated 💯 👌🏻 🍻 congratulations on Quitting smoking!

[@tomnielsen6439]

Why couldn't you drill and tap the broken pulse line fitting and put a plug or allan screw in the cylinder?

[@fast4405]

When are you gonna rip into that jred 920? How about the echo 590? What happened to that one? Love your channel, it makes my day so much better. Thinking about your issue, could you drill and tap a hole where the pulse line was, and then just put sealant on a bolt and shove it in there? Wouldn't have to weld it that way.

[@johnyk71]

Go easy on the coffee in the evenings, helps the sleep problem on your journey

[@tinmanssaws]

I dont drink coffee after 4pm

[@robertsmith7580]

I put a 262 together the other day, put a brand new coil on it. I screwed up and ran the wire to close to the cylinder and it burnt into, just a stupid mistake on my part putting it together !

[@tinmanssaws]

I've done that and sucked the wire right into the flywheel.

[@travisweldmaster7815]

Sendem down here yo nc buddy

[@vintagesawyer6246]

Why not either plug the impulse line "hole" with a bolt , or get a thread in fitting,tap the hole and use it. Probably was too much vibration for the brass fitting (?).

[@tinmanssaws]

I ported transfer is way too thin to tap.

[@vintagesawyer6246]

​@@tinmanssaws oh I see.

[@johnsonlong1272]

Couldn't you just plug the impulse hole in that jug I have done it many times with just too Short set screws tightened against each other also using permanent loctite. I mean you also could use J-B weld with tape on the inside but you would want to put a countersink lip on both ends and once full of JB weld use a heat gun or something to warm it up so that it flows into the holes really well the counterbore can we just ground in with a die grinder it is only to keep the J-B weld from blowing out or sucking in. Another way I have done it is tap the hole with a coarse thread tap then from the outside drill halfway through with a bigger drill then grind a couple slots in the counterbore of that for the J-B weld to grab ahold of that way it doesn't just spin back out. fill that hole with J-B weld tape on the inside and use the heat gun to make it flow well.

[@chadh1721]

You become a slave to it, when you wake up, after you eat, when you’re bored. It’s crazy how your body becomes addicted to something that is so bad for it. October 3 will be two years smoke free for me.

[@mikedaugharty5544]

Tin man for your sleeping I have insomnia also getting older and uh I go to bulk supplements that's the name of the company and I order L tryptophan capsules and melatonin gel caps has been helping me a lot

[@vascopires2045]

maybe a set scew

[@pantigersizzle5761]

Consider the baby. That's the best reason to forget the cigarettes.

[@tinmanssaws]

That's why I did is 100%

[@donnywalker4691]

sometimes those old plastic air filter chokes dont seal well check it out bud

[@tinmanssaws]

Thanks Donny

[@jasentonguepowersaws4206]

Congrats on quitting smoking

[@mrxlh]

Drill and tap the impulse lines, problem solved…

[@frankz1125]

Didnt know you smoked. You hid it well. Congrats on quitting. Hope you can stick to it. Its been a hard go for me to stop. Pretty much only way I can quit is jail.

[@tinmanssaws]

I used to think like that. You'll quit when you want to and are ready..

[@frankz1125]

@@tinmanssaws Ive quit many times but seem to restart not long after. One day. I have definitely cut down. Cheers. Keep them videos coming.

[@fatmattchopshop3620]

Hey tin man can you build me a saw I can pay you?

[@tinmanssaws]

Morning buddy, With a baby coming etc I'm not taking on any new customers at this time as I can't predict what the future may bring. Thanks for all your support it means alot.

[@steelcityperformancesaws]

tinman if you want them welded up send them to me

[@jeffkenyon7084]

Quitter

[@anthonyjoannou1019]

Hello, Tinman I have restored My 262xp and the two parts I can't find are 5037045-01 and the second is 5037049-01 and has that baby come yet! Tj