tinting a back window in less than 10 min

[@peanutbutterjellybeans1336]

Incredible speed and accuracy. This guy makes it look so easy! lol

[@michaelleneghan8274]

Awesome video! Made tinting my car a lot easier. Simplifies whole process and does a great job showing the correct way of doing it. I used water and baby shampoo in a spray bottle

[@DutchDutchdesign]

👊

[@optimistichorizon]

Looks like a professional job to me. A few problems I was going to encounter that other tinting videos did not resolve were resolved after watching this video. Thank you.

[@EldenTriLee]

Great job! There's some new things I hadn't seen in other videos. I've tried tinting my curvy rear window 10 times now but this video might give me the confidence to try one more time

[@sskkuuddrraa]

the same there :D

[@cerrajeriasanpablo]

Very good technique, and I congratulate very clean work, greetings from Venezuela.

[@DutchDutchdesign]

thnxs bro,

[@javierbetancourt4205]

Dammmm he makes it look so easy, it took me 2 hours to do my back window jajajajaja...

[@josem.2909]

Javier Betancourt and still left some bubbles ☹️😄

[@michall1949]

It took me 6h and 4 tries, and I'm going to pay someone to do it anyway, lol.

[@kennethbryan3738]

It too me 4 tries and i couldn't do it..albeit it was a cheap tint that refused to shrink

[@c5quared626]

ive watched alot of tint vids. by far this guy is the best. no bs

[@nathangoodfellow5260]

agree

[@andrewduran8365]

Lmfao

[@timbrennan165]

Good job done. . makes it look easy. Good clear view too. I'm ready to have a go now 👌

[@djsluggo7779]

OHHHHHH!!! I get it...the clear switches sides when you unroll! Thats why you wet it so much, so it's loose an doesn't stick! Got it...Magic! Great job Sir!

[@BPoweredLove]

Yes. Reverse-rolling. Typed out as "RRoll", "r-rolling", etc.

[@gaboaaa23]

how is it possible that he pulled down the clear then rolled it and then the clear film was on it again?

[@risingtheory6449]

Ah you're absolutely right i apologize I skipped the end thinking surely you had left it on the back after all the shrinking and precision work

[@rehanmazumder8054]

Its great job. Like the way u work. I am shams from muscat oman. I am the llumar tint champ from middle east.

[@DutchDutchdesign]

Tint champ?? Are there competitions in this?? Love to join.... Thnxs for your reply

[@rehanmazumder8054]

Yes gentle man there is yearly championship events in middle east and worldwide by llumar and some other brands also. i am llumar champion in middle east 2014. you most welcome

[@Eatprepd]

How come when you rolled it up the plastic covering was facing you but then when you rolled it on inside it was still facing you?? I thought you rolled it on the inside

[@danielcorpuz4728]

Its called reverse roll - where the liner actually switches and sticks to the outer film side when you initially roll it up leaving the adhesive "sticky" side exposed when you unroll it.

[@uncreativename9936]

I watched this video since I want to tint my windows. After watching it I'm certain you're some kind of freak and that it's insanely hard lol.

[@shakeit6898]

dont the clear film side have the sticky side that goes on the glass? it appears that its the opposite?

[@yontOGtony]

Reverse Roll technique, the liner clings on to the backside of the film

[@chillozz1]

ziet er strak uit mannen :D Ik heb de mijne in duitsland laten tinten. ook super goed bevallen.

[@thewhitebirdband]

Best and Quickest technique 👍🏼

[@ivanpetrov2280]

Damnnnn.. is look so easy when you do it matev :) hahh . I make myone horible , but i learn something from you. I have to try again, the problem for me was that on c3 2006 , the rear wondow is very curve....

[@arccraft8583]

The roll technic are brilliant!!

[@CZUndead]

For all those who are curious about his technique, it's called reverse roll. You can google it. Don't worry, glue is on the glass even if liner came outside. Magic happens!

[@captainspoulding]

this guy roll the foil ...the glue is outside....wtf??

[@shawnlulis1954]

I came to the comments to figure out what he did there 😂

[@maximeosorio9527]

Hii Dutch Dutch, i look your video from France and like your technique ! No squeegee even with the hand during dry shrinking!It's seems to be good result and great quality on this clio ! I try to do the same on my A4 sedan year 10, have you got some tips to get perfect finishing on the periphery of the window ?Thanks and a new time : great job !!

[@windowtint1375]

Sweet vid, i like checking out other tinters methods.

[@bordercollie1975]

I used black see through paint. Took me 1 minute.

[@DutchDutchdesign]

nice job! ✌

[@StopaskingformynameYouTube]

Aaaand it probably looks like utter sheit.

[@ChaseEverything]

Got a picture?

[@RigginTheRod010]

@@StopaskingformynameKZbin I think he's playing

[@juizzii386]

@@RigginTheRod010 Dont know about him but it does work, even normal black paint works. in some countrys it may be illegal and in some legal in finland it is legal

[@tannermoore2221]

Haha you make it look so easy. Great job

[@amoranimalesjaylaesbud6575]

Gossie, ik dacht dat het nooit goed zou komen. Lol. Great job. 👍🏿

[@nestorautorepair]

this is something new i will give it a try

[@peterpunch1]

Ok so I was about to post a sour comment: "Am I the only one putting window tint on the inside?", but the video unfolded a very nice trick instead. Neat work :-)

[@sleepingwarrior4618]

Is it me or at the 8min mark, he's applying his film and he pulls off the clear leaving the sticky side out? Not to the window? Am I seeing this right?

[@elladamerie]

i see the same as you, it's not the only one I see install like that. Maybe I see it wrong though I dont know

[@bobcobby8801]

No he pulls off the clear film which is touching the glass so as he rolls it out the sticky part of the film touches the glass does that make sense ?

[@superglassrepairrestoratio8327]

very nicely done

[@johngatsby1473]

I'm a diy and I have tinted glass back in the day. Nowadays I have the money to just let a shop do it but these clowns raised their prices BAD......Like I guess COVID. Did a number. I flat out asked the last shop what the hell was going on and she said the tint product went way up. I don't believe it as I can go online and buy tint in bulk. Anyway.....I got my rear window all cut out but I didn't do all the prep on the outside like you did using a heat gun. I tried doing it on the inside. I threw it away so now.....I'm going to try it again.

[@AngryDonutGuy]

Aren't the layer between the transparent film and the layer on the tint itself supposed to go againt the glass when mounting it to the intended surface? He peeled it off after mounting it on the rear inside glass (intended surface). WTF, am I missing something? 8:15

[@hi-calibregraphicsltd.4547]

Yes. Yes you are missing something.... Many things in fact. Where do I begin? #1: Glasses...

[@AngryDonutGuy]

Reverse roll..

[@Mad-Man84]

Great job what's the name of the film you using????

[@eugeniuiaconi9840]

Hello . good job . Tell me please. what is the name of the foil? Factory name?

[@adrian17cy]

As angrydonut said, is the film on the other way? Or it's a 3 layered type film? At the inside, you peel out the film from the outside, where it supposed to be a "glue" in between. Can you please clarify this? And it's a very nice job! Did my windows at home 2 days ago.. and they are a mess lol. I might redo them.

[@micky9229]

No magic, normal film. Check out my main comment for the answer :)

[@thibv7828]

j'ai révé ou le coter avec le film transparent (le coter ou il y a la colle donc) n'est pas placer sur la vitre mais vers l'intérieur du véhicule ? parce que la ce n'est pas coller c'est juste l'éléctricité statique qui tient le film ...

[@MrGonzales1982]

Amazing skills bro.

[@utoobube]

Damn right! Nice work!

[@DutchDutchdesign]

👊

[@RyanRagland]

I missed something. Rolled the film I get, but unrolling with the sticky side out? What did I miss?

[@paulholla]

Hmm I saw that. So it's not stuck down then

[@gav6808]

It is reversed roll and yes it stuck on.Plenty of videos on reverse rolling tint on youtube

[@dshow1658]

What kind of film is it . I’ve been tinting for over 30yr never seen tint shrink like that

[@z4u68]

I believe in part the trick here is Patrick's skill and the other part is the high priced tint he is using, I used Gila tint from Wal-Mart and it isn't as easy as that. I have played around long enough and wasted enough tint to figure out how to do it with the cheap tint but I don't advise anyone to follow my efforts , doing this is like discovering the new frontier all over . I don't think many can get there where Patrick is using cheap tint and if they figure it out , its ten times the work.

[@DutchDutchdesign]

👍😉

[@mbdk08]

Tried that gila from walmart but it's a pain in the ass I could not do it and I done a lot of tinting

[@joeyjoshuavDijk]

Waarom staat er Zwitsal op het dak?

[@ItumelengS]

when a guy starts whistling, you know, the window done fucked up 😂😂😂

[@DutchDutchdesign]

Itumeleng Setilo 😂😂😂😂 "the window done fucked up"

[@marcoermers7579]

Haĺlo mooi werk maar de beschermlaag zit toch normaal tussen de raam en de folie? En niet aan de buitenkant?

[@DutchDutchdesign]

speciale manier van op en afrollen... dan komt de beschermlaag vanzelf naar de voorkant..😉

[@mchs-ml1yc]

WHATS THE NAME BRAND OF THE TINT YOU USING

[@KaniFuker-Sir]

Very impressive indeed.

[@DutchDutchdesign]

thnxs

[@tintexecutive8603]

how long an install is it, factoring removing the lip spoiler? 25 mins?

[@gleisonramon884]

Can you tell me if Garware NR is good for modeling?

[@rembossreborn420]

nice job. GG . what's the name of the tint u using?

[@adandestefanicoelho4045]

Sun gard

[@alzworld3441]

He does make that look easy but what I really wanted to see was a rear window on a sedan (very sloped)...that's what I am facing...great job tho...

[@radekjakistam2868]

what kind of tint is this? and what temperature you use?

[@manbiteslife3110]

Looks like basic 5% and max heat of gun

[@xpectnomercy1]

well the way we do almost the same within same time but little different method, tiny bit of powder and use hand to get rid of creases and its much more safer way. the way you shrink the paper i tried couple of times but there is a risk involved of burning the paper out but its good for you tho.

[@xxxdzv]

Dude...nice work but i watched the part where u roll the film like 10 times.how the adhesive side goes to the glass?

[@DutchDutchdesign]

Roll it up... When you put it on the inside only pull the liner then the magic happens!!!

[@MissD1zzy]

I thought you put the sticky bit on the glass but looked like you you didn't cause you just took it off ? Never seen it that way before

[@sivaslicmc]

Welk type merk folie gebruiken jullie eigenlijk

[@uemackay1592]

I dont understand he pulled the clear plastic off at the end but the sticky side is under that plastic, no? So the sticky side was not on the window???

[@benhansford8524]

So what brand of film did you use

[@concrete981]

what % tint did you use on the back.

[@yousefbenyamine209]

Name of film please

[@barbossajacksparrow9481]

Nice job

[@josevargas6834]

can some one tell me how to do reverse roll . im confuce when i watch this video.

[@devilshaircut9]

Was this a forward roll? It looked like he took the backing off at install and the backing was away from the glass

[@tommichael9482]

This is bull shit video, don't follow him. He put the glue faces out side.

[@arniehgk]

@@tommichael9482 no he didnt

[@vladodomi8091]

@@arniehgk That confuses me in this video as well. And it seems to me that the side with the glue is outside.

[@123mcgarrigle]

@@tommichael9482 Yeah, he did it wrong 😂😂😂

[@tommygomez5343]

Does anybody know if he put baby powder on the back window before he began the process? I see him rubbing the back window before he began, just wondering if he rubbed something on the back window in the beginning of the video?

[@cad4life93]

How come when he heat shrinks the tint on the car he has the clear plastic facing up. But when he installs the tint the clear plastic is facing down. Shouldn't it be facing up since it formed the tint up?

[@DutchDutchdesign]

magic!😉

[@baszonneveld7740]

LOL ;)

[@balkanguydiy]

nope ,liner is between the glass and film ..notice how he glues the film to the glass from one end then unrols the film .Now keep in mind that liner is still between the gass and film except for the small portion of that is glued ,then he just pulls the liner from in between the glass and film (thing making the confusion is that u dont see where the liner is )

[@kanechapman7187]

It's reverse rolling, commonly used for flat glass application but serves purpose for automotive aswell. To gain an easy understanding, just look for 'reverse roll tint method' on KZbin and pick one to watch. Easier than explaining with words ;)

[@mujassamrafiq7368]

Heat gain on high speed or low speed plz tell me

[@yy381]

8:18 he peals the protective film off and has the tint facing the wrong side or am i seeing something wrong here?

[@Jcr8519]

Any way you can show how you rolled the tint the way you did never seen it done like that ????????

[@MrCneo]

what brand of tint is that and where can I find it? TX USA

[@DutchDutchdesign]

Sungard

[@trendsolutionfilm357]

I'am is installer window film from indonesia since 1999..txu

[@DavidHernandez-ob7or]

He's very professional

[@karlworm6326]

Hoe heet zo'n ding dat het heet maakt? en de vloeistof die je erop spuit voor je het folie aan de binnenkant plakt?

[@DutchDutchdesign]

karl worm dat heet een verfbrander en de vloeistof is een sop

[@victorcabello3755]

hi there, i need to tint the front window, it apply the same technique or i need to use the gloves? thanx in advance

[@DutchDutchdesign]

same technique

[@xpellittletock]

nice work! what type of heat gun do you like using? we are looking for something with stronger airflow. we are using the typical Ultra Heat hot air tool. Thank you

[@DutchDutchdesign]

it's a "black and dekker"

[@xpellittletock]

Thank you so much

[@DutchDutchdesign]

+SunStop Window Tinting thank you for the complement!! ✌✌

[@dant565]

I still old scool wet shrink lol. Is that baby powder?

[@DutchDutchdesign]

Yes it is

[@Toyota529]

Which window film that do you use?

[@alexandervillalobos9495]

Buena técnica

[@davebentley4829]

can you still by it in a spray can ?,i used it onec on me 100e ford pop.

[@Solutionsleon]

What type of paper is that??

[@kristiankrta]

Hi there, please what is that white powder you just applied in first seconds with hand? And what is the water? Its enought to use soap water? Thank you

[@oliverthompsonjr1975]

Baby powder...U can also use moist dryer sheets to hold the tint in place.

[@asarj6771]

Which brand paper use it

[@bigdema85]

external film?

[@izzatahmadi4828]

Which Renault modle is this?

[@DutchDutchdesign]

Clio estate

[@rammieification]

The layer is on the wrong side?,,

[@Layijikung]

hahaha, I think so.

[@paulholla]

He reverse rolled it

[@jwells4102]

looks like you installed the adhesive side out. When you removed the clear film. That equals to a wrong install.

[@DutchDutchdesign]

Adhesive is on the glass ! Believe me

[@AngryDonutGuy]

J Wells +1

[@AngryDonutGuy]

Dutch Dutch Patrick Vermeulen Well, I don't believe it my good sir. Though looks like it when you sqeeze the water out as the adhesive would not let the bluemax slide very well. But still think you're the devil of tint, cuz that's magic if its true. lol

[@DutchDutchdesign]

***** Hahahaha.... You know Hans klok???? He's my uncle... Hahaha the magical him self!!! Adhesive on the glass

[@xxxdzv]

J Wells how can the adhesive be on the glass?can smone tell?

[@aimers271]

good job. what type on film was this?

[@DutchDutchdesign]

Sungard

[@aimers271]

ok. what sungard?Dutch Dutch Patrick Vermeulen

[@DutchDutchdesign]

sungard hp20

[@kadosmc]

Esa técnica de termoformacion funciona con cualquier tipo de film?

[@ahmedaziz4966]

great job😍😍😍

[@jenniferf.2727]

What is the best tint for dry 114 degree climate for your car

[@yenomeerf]

move out of Arizona

[@sacaroni741]

Johnson window films marathon line

[@OFFAxisBuilds]

what is the heat gun for?

[@DutchDutchdesign]

to shrink the material

[@PetrProvaznikVideo]

Good day using some soap? Or just baby powder? :)

[@DutchDutchdesign]

Petr Provaznik soap water and baby powder

[@guadalupevillegas3463]

Hey man, first I wanna say awesome video! You have a lot of skills, you are a pro. I just want to know what kind of tint you are using and also what is the heat setting on your gun??

[@DutchDutchdesign]

Tint is 5% from sungard, heat is on full throttle... 550 degrees Celsius

[@DBGHOSTEQ]

How to roll the tint

[@jeftervictor3190]

se o plastico transparente tava pra fora como que a cola estava pro lado de dentro?

[@MrTafamustafa]

Op hoeveel graden heb je de verstripper/Hetelucht pistool gezet ?

[@DutchDutchdesign]

Vol gas!! Ongeveer 600 graden

[@MrTafamustafa]

MERCI !

[@369ahx]

How do you deal with dot matrix?)

[@AngryDonutGuy]

Konstantin Baranov Good quality tint don't have issues with dot matrix. The adhesive today is so good that it fills and isolates the dots. However, tint is not intended to go way past over the dot matrix. 1/4" just so it covers the dots and just some of the border. This is what I've heard. Either way some well cut black vinyl works if you're looking for a work around to cover the dots. Won't be seethrough tho

[@DutchDutchdesign]

Always put your tint over matrix

[@FAKAMUSHIN]

Wat voor tint folie merk gebruik je ?

[@DutchDutchdesign]

sungard

[@Baz87100]

Why don't you show the first process for cutting it into shape? Do you just place the product over the window and use a Stanley knife to trim it to size?

[@DutchDutchdesign]

just cut it a little bit bigger then the window... that's all you can use a Stanley for that...

[@SayeedTV_]

hoe heet zo'n ding dat hij gebruikt om de "bubbels" weg te halen?

[@SayeedTV_]

+Dutch Dutch Patrick Vermeulen

[@DutchDutchdesign]

+SayeedTV een rakel

[@micky9229]

It appears that the film is put on the window on the wrong side, since the clear backing is removed from the side closest to you. I went to bed thinking this was voodoo. I woke up and realised that the "water spraying and rolling stage" held the clue (in magicians way of thinking) and was essential to this trick, where the film releases from the backing on the now wet side/glue side and transfers over to the layer behind it, thus when unrolled, the glue is in fact now near the window and the backing near the installer. *Genius!*

[@Triippy]

Micky yes that is how tint is installed. Lots of people Dont understand that so props to you. Lol

[@steliocontos82]

Ye ol reverse roll

[@icantellfakefromreal]

my ebay film just krinkles and gets creased if I heat it up that much maybe it's cheap garbage

[@robertbidochon7949]

+icantellfakefromreal Yes it is. Try Llumar, SunTek, Ultra Vision, 3M, Hüper Optik, Johnson Window Films, Solar Gard...

[@jw200]

Can somebody explain why the heatgun is needed? what it does ?

[@yutotakedai]

jw200 Objects like these can only curve in one direction, like a piece of paper. If you try to curve a piece of paper horizontally and vertically at one spot, you won't be able to. Using a heat gun allows it to shrink, making a curve in the film in many directions, allowing it to curve exactly like the window.

[@ezerik8652]

+TheTakedaiProject 0w2y

[@ezerik8652]

hey 2

[@risingtheory6449]

Hey Dutch I was always under the impression that tint is supposed to go on the inside of the window? Is that a different style of film or something or am I just completely wrong? Please help me understand

[@DutchDutchdesign]

as you can see in the vid. I put it on the inside at the end of the movie...👍👍

[@mikeprice8307]

@@DutchDutchdesign yes but you peeled the clear away from the adhesive that's facing you..why?

[@manbiteslife3110]

@@mikeprice8307 clear is only in front of the tint to protect the glue. It can't stick if you don't remove it

[@davidschutte9167]

Cometaar hebben mensen tog en zelf kunnen ze het niet goed bezig mooi werk

[@nohmochtar754]

Wait. At 8:18, when he peel off the film, where is the adhesive side? Its very confusing. Can someone explain?

[@edwardzx7]

You’re almost a minute late!! What the hell were you doing while watching the video? Stop asking dumb ass questions!

[@wentaGT]

What is deemed acceptable as a passable tint job? I just recently had mine done and it's short in some areas and had minor specs of dirt on my driver side, which I can live with (very very small). Just curious coming from professionals what's passable?

[@DutchDutchdesign]

little dots can appear yes... but then it's not proper cleaned.. to short really is not done!!!!