TinyHawk II 2 - 200mw Vtx

[@Kabab]

Table of Contents: 03:27 - 1S flight video 05:33 - 2S flight video TInyHawk II 2: bit.ly/2Z7hAWX TinyHawk II 2: bit.ly/2PDRec9 8% off coupon: BGTHAWKII ▼Join my FB group for more discussion: Kabab FPV facebook.com/groups/379155946182689/ The store: www.FPVCycle.com ▼ My typical 5" quad setup: -Hyperlite Glide Floss Lite: fpvcycle.com/collections/frames -Motor: -Xing 2306: bit.ly/2Nqqr25 - ESC: bit.ly/2oDdzvL -WaFL’s Cap Cap: bit.ly/2GUpXxO -Battery: bit.ly/2JnsTDM -FC: bit.ly/2XRc8G8 -FPV Cam: bit.ly/2Q7LfL7 -Vtx: bit.ly/2HsrASs -ND GoPro Mount 30deg: bit.ly/2WC15zc -ND Filter (if used): bit.ly/2WEmQ1j ▼My preferred goggles as of Sept 2019 bit.ly/2k5YNv5 ▼Notable motors: -BH R3 2207 for $9.99: bit.ly/2NaTWEy (limited quantity only) -Xing 2306: bit.ly/2Nqqr25 -Xing 2208: bit.ly/2y3te8R -FANTASTIC 6" motor: bit.ly/2LqghOZ -Starter goggles: bit.ly/2qbJNOS ▼ If you want to solder better: -Fantastic solder: amzn.to/2P5QM2W -Fantastic iron: goo.gl/DqBipa ▼ Tips? Patreon: bit.ly/2oGLP9b -PayPal: www.paypal.me/kababfpv -Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ -Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f -ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5 -LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG -Tesla Referal code: ts.la/bob40889 Please use my referral code if you're gonna buy a Tesla. You get some free stuff when you do and I get better status with Tesla.

[@josephbove7477]

Great review! Point well made on the connectors. I just got mine and all I can say is you're not going to find a quad out there with this many features at this price level. The quality appears to be fantastic as you pointed out. Its flight characteristics are amazing and the added benefit is it's suited for indoor and outdoor flying. I rate this quad a 10 out of 10 on the fun Factor scale. Get one while they're still in stock! Thanks again for a fantastic review and happy flying.

[@CarbonGlassMan]

The frame out lasted the board on mine. Several crashes on mine. Very few hard crashes. Plenty of grass stains on the frame. Now it flies for about 30 seconds, then RX Loss and falls out of the sky. Unplug the battery for a minute and I can get another 15 to 20 seconds of flight before it does it again. It connected to Betaflight just fine at first. Now it's hit or miss as to whether or not it will connect to Betaflight. R.I.P. Tinyhawk 2. 7-10-2020 - 8-14-2020.

[@NSSdt]

its a cool beginner quad :) i bought one 2 months ago and its so much fun and i`m crashing sometimes hard. no problem for the tinyhawk, sometimes a prop fly off nothing more. Im using the 1 S Tattu R-Line 500mAh 3.7 V 95C with BT2.0 connectors (soldering), crusing around = 5min30sec. / acro=

[@kaptkrunchfpv]

I freaking love mine! And yep swapped to a xt30. I fly it on 2s and let other people try fpv with it on 1s. Its been smashed, trashed and bashed. Still going! Best tuned out of the box BNF I have tried.

[@anthonyrubalcaba4179]

that "rocket" appearance is called a sharkfin, and it's used to help the quad flip over after a crash (or turtle mode) by increasing the angle of a flipped quad

[@MCsCreations]

Fantastic flying and review, Bob! 😃 It really looks great!

[@QSpeedRacer]

Love my TinyHawk2.. I did upgrade the battery cable to thicker wire and solid pin connector. Only thing that broke is the receiver antenna which i replaced. I still fly it around my house even though i have a 2" whoop. though my betafpv literadio broke so fast so i have to bind it back to the emax transmitter.. I fly 2S outside but I am probably killing those batteries. I let it go down to 5v if i know it will bounce back. I am just assuming battery not actually dropping

[@genna87]

I just bought the TinyHawkS and the battery connector of the THFreeStyle to mod it and use 2x1S as a single 2S Primarily because that connector doesn't have hollow pins and still let me use the quad with a single 1S My only concern is that the weight of the double 1S pack will be too much for it

[@Kabab]

ya no worries....at all. If that frame breaks, swap to this one. Double pack is no weight issue for it but I really don't recommended on 2S. Feels like a flying rock

[@genna87]

@@Kabab Not if, WHEN it breaks 🤣. Thanks man

[@SirCrashaLot]

They need to come up with 2.5 in the same reversed style ( maybe a hybrid carbon and poly ) so we can run it up the walls on our Dutch spec leagues.

[@Kabab]

The Tinyhawk freestyle is actually pretty excellent IMO. Not what I'd build myself however.

[@CarbonGlassMan]

I love the idea that this is upside down. My EZ Pilot is right side up and the props keep flying off. Especially after they've been on and off the motors a few times. Or after a few batteries the motor shaft gets pretty warm which allows the props to fly off easier. At least with this design when you go from 0 to 100% throttle, the props try to seat themselves instead of flying off.

[@urodinofpv3313]

Quad name in OSD ...hilarious

[@TateDK]

The reason why they solder the wires is if not the white connectors, that also sits in a emax tiny hawk s version and tiny hawkfreestyle also have the same aio board as this, the White connectors will melt together on 2s if not soldering, that happed on my tiny hawk s but with a 460 mah battery 2s, when i think about it🤔 u said 450 on 2s was the sweet spot u said on your 3 part episodes on the tiny hawk s. But that’s not recommended, stay with the small original batteries it’s will save u in the long run 1s 450n mah and 2s 300mah. At least the lens have protection - and they listened to your advice about the xt30 witch you also mentioned in your 3.part episodes. And agree on 1s it’s much better and fly better. And the motorwires look a tiny hair thicker than the previous tiny hawk

[@theDudeAbid3s]

I guess more losses in heat due to impedance with plastic connectors? Seems like weight saving as well.

[@Kabab]

If you want to run 2S, you need the capacity of the 450mah to sustain the amps. So that's the 'sweet' spot for 2S but I don't like it on 2S at all.

[@Funcentric]

Thanks for the exclusive content. "Floss your teeth," haha. I literally was LOL.

[@RcReviewsLt]

They could use already the BT2.0 connector and Runcam V3 nano ;/ Also where new Tattu batteries on the way with BT2.0..

[@Kabab]

Small cell tattu packs are no good in my experience. BetaFPV packs are no good either

[@RcReviewsLt]

@@Kabab there are new packs coming soon. Hope they last...

[@Kabab]

@@RcReviewsLt why gamble when the gnb packs are already 100% solid

[@RcReviewsLt]

@@Kabab Solid while trying to push good quality but not quantity =) and they'r hard to get :D

[@Max_0578]

@@RcReviewsLt They aren't hard to get. You can buy them on Banggood and they ship world wide.

[@volvo850enjoyer8]

Hey Kabab, are you receiving a mobula6 too? I would be really interested to get your opinion on it :)

[@Kabab]

I'm supposed to but dunno where it is.

[@changeagent228]

I am holding out for the DJI Tinyhawk HD 😆

[@Kabab]

Lol would be awesome

[@JodyGUY]

Would you recommend this or the Tinyhawk Freestyle for a smaller, safer, more portable freestyle quad? I'm looking for something to have alongside my 5in. Thanks!

[@ferfzero4333]

The TH2 can do 1s indoors, Bob talks about the drawbacks of the 2s performance, but has improved camera and vtx so has decent exploration range. Freestyle is pretty ideal for yard flying- needs the camera and vtx to start to be a fun park flyer.

[@dronereviewman9580]

Another review on this sweet whoop!!! Man i want one!!!!!!!! Great Flying & Great Review!! 👍😀👍

[@MachuPichuu]

With a ph2.0 solid pins and higher awg wire the tinyhawk s works night and day better than the rolled pin. I don't get any sag what so ever. I would recommend that over the xt30 just because of battery / charger selection.

[@tylers1219]

In the description of your 3rd TinyHawk S installment, you recommended the red JST connectors over XT30. However, they have never been seen, used or mentioned on video. Do you still recommend those red JST connectors, or is XT30 better option?

[@Kabab]

That one is still good. The xt30 is just more widespread. So less work on your part. For 1s on this whoop, the bt2 connector would be best

[@JR1994997]

bought the RTF version(never flew a drone before or any decent hobby craft) it takes abuse the vtx antenna broke over all the crashes i had to add more solder it would cut out every time i hit the throttle the ground was exposed and getting interference

[@gnarlyblasterboys4123]

Because the props are such a pain to remove I’d say the mobula 6 or the beebrain BL is the way to go... love the pushing aspect though....

[@ernieschatz3783]

There's a technique that makes removing the props pretty easy. Turn the quad upside down, get a small hex driver. Push against the prop shaft with the hex driver while applying opposite pressure of the prop with your fingers. The props pop off pretty easily that way. I had to learn that after scooting from under a couch and fouling the prop shafts with hear balls!

[@theperson12345678920]

Looks like a nice upgrade, Disappointed they didn’t improve the vtx though...

[@Kabab]

well it is 200mw but those annoying white flashes are still there

[@theperson12345678920]

@@Kabab oh interesting, yea the og tinycock was a flashing screen over 50% of the time on fatshark dvr, got myself a powerplay its pretty nice, next upgrade is crsf and rapidfire for my 3 inch builds

[@lavitesse7353]

Hi Can u test the runcam Split 3 micro please, because there is not a lot of test on it...

[@Kabab]

I tested it. It's still not very good. The HD footage just isn't worth the hassle imo. If you want it for a small 3" then sure it's great. But not so great.

[@lavitesse7353]

@@Kabab okay thankss

[@El_Muffy]

Can you give me your rates and pids? My stock tinyhawk 2 doesnt flip and is slow really And, for what i understood the stock ph2 connectors sucks? Also, is it only me or it doesnt flip over after crash in turtle mode?

[@samavella8831]

Hi, Thanks for the video. My TH II is still in the mail and looking forward to it. You mentioned a possible camera upgrade with the RunCam Nano 3 Camera. Will the Nano 3 fit the TH II or will you need to modify it? Thanks Sam

[@Kabab]

it'll fit in there but there's no direct and easy way to mount it. you'd have to figure that part out.

[@Perforator2000]

I'm hoping I can put the Tinyhawk 2 board in my Tinyhawk Freestyle, for the VTX upgrade. I guess beyond the soldering, I'd just have to change the board orientation and input the Freestyle PIDs and other settings in Betaflight. Does anyone have any advice on that?

[@Kabab]

Yeah that's it. Board orientation, actually motor orientation too and rates

[@Perforator2000]

Awesome, thanks for the reply.

[@Crazy2limchai]

Hello kabab.. Just wondering. Can i use 2s lipo with 1s profile setting so i can get more flight time.?

[@Kabab]

You could lower the power output but really the best way to go is just to swap out the battery. Running a bigger batt on lower output will give you a little more flight time with a lot less performance

[@Crazy2limchai]

@@Kabab thank brother.👍👍👍👍

[@jakelang4387]

What if u putt the racer 2 connector on it and fly 2s with two ones ?

[@markthomas3853]

the tinyhawk S does have a cap at at least the later ones... sadly mine got run over by a car today... needs a new board and a motor, frame could be reused, even the camera made it... we'll see what I end up doing as it's around $50 to fix... too many for not TOO much more.

[@Kabab]

ouch. sorry to hear :-(

[@markpooler5013]

I also find in 2s the motors get a little hot. Def stick to 1s but 2s its fun once in a while for a quick rip lol

[@MrMayex]

I just bought OG tinyhawk :(

[@Kaaarist]

I literally just got mine today...well..

[@scotternst3678]

I got my og tinyhawk a few weeks ago. You'll love it ❤

[@falljazz]

You won't regret it

[@GTXgb-gt8lz]

Got mine yesterday :(

[@Burn377]

That's not a bad thing, it has a few advantages over this.

[@robbinkoot2154]

I suddenly get really bad sag on my tinyhawk. I can fly 3 and a half a minute, and it sags down to 3v. The resting voltage is 3.7v. but this came out of nowhere. Any idea what causes this problem?

[@robbinkoot2154]

@kewbla probably... But it's just out of nowhere. I always set them at storage voltage. Yes, I do that even with these small 1s Lipo's

[@M.TTT.]

@@robbinkoot2154 how old are the batteries? 300mah or 450s?

[@Kabab]

what connector is on there. If it's still the PH2 then swap that and you'll magically get more power and longer flight time. Otherwise, the battery may be shot.

[@robbinkoot2154]

@@Kabab I tried the xt30, without any improvement. I'll just buy new battery's

[@neilfpv]

So you recommend 1s instead of 2s? I just got it. The battery I have is a 2s. I had to set motor_output_limit to 50 because it was too fast inside the house. I only have 1 battery right now. I'm wondering if I should buy 2s or 1s. Watching your 1s footage, looks like it's very smooth. I am not sure though if the performance of a 2s with motor_output_limit of 50 is the same as a real 1s. Any help would be greatly appreciated! Thanks a lot!

[@Kabab]

yeah the lower weight of 1S and reduced power is much more enjoyable imo

[@neilfpv]

@@Kabab Thanks a lot for the info!

[@DoRC]

The issue I see with them soldering the motors is you can't change the frame without desoldeirng them all.....

[@theDudeAbid3s]

Ehh, I mean solder skills is sorta a given requisite in this hobby cuz you're gonna crash at some point.

[@riggermortisfpv526]

Now I think Ill get one. Thanks for the review.

[@theresonator01]

Just bought the s 😪

[@Kabab]

ya no worries....at all. If that frame breaks, swap to this one

[@theresonator01]

Give this one away buy the new one I love this hobby 😂

[@theresonator01]

@ab vevo yeah but i like the runcam and vtx though.... I hope emax Will overhaul the freestyle next!

[@namthainam]

Wait what? But the motors on the tinyhawk are up higher not at the same level. Other whoops have the motor down low with the battery. That makes other whoops' z-axis smaller. Am I missing something with that explanation?

[@Kabab]

The battery is the issue. You need the battery to be as close to the prop line as possible since it's a significant weight. Traditional whoops have the battery swinging way below the prop line

[@Averell64]

Are you gonna test the armattan tadpole at some point? It does look pretty neat imo but weighs almost twice as much as your TS3 frame - since I didn't get around myself to build a toothpick style quad i can't really judge how much of an impact that could make on flight performance

[@Kabab]

pretty significant impact but more importantly, the weight distribution on it is spread out far more than I would recommend. Of course I haven't tried it so I don't know for sure but I'm also not really planning on trying it either since I've built many things like it for testing.

[@cloudwind23]

At exact the same minute this vid is online together with albert kim's review

[@69fox]

Noticed that too lol.

[@volvo850enjoyer8]

and nick burns too

[@M.TTT.]

thats how it works, they're aloud to release the vid at a certain time and date

[@lockingpaul]

Allowed 😂😂 frames mint how bout the aio? How many of those u been through! Or wha 🤙🏼

[@dermax_hd]

what about the moblite7? looks like an overall totally improved mobula7, maybe even making it better than the tinyhawk 2? i really cant decide which to get :(

[@Kabab]

The tiny hawk will out live the moblight for sure. Far more robust

[@dermax_hd]

@@Kabab with you on that for sure! Gotta say 9mins of flight per pack is quite tempting tho. Anyways thanks for replying, really made my day :) also keep up the awesome awesome work man. Really love the vids!

[@itsme-fr5fr]

Love it but dose it have a switchable vtx power? The 25mw just didn't give enough range

[@Kabab]

it's actually 200 or 400mw

[@Kabab]

it's a 200mw

[@itsme-fr5fr]

Awsome, that should be more then enough for my needs. My next purchase will most likely be either this or the mobula6 but still not sure which one yet cause they both seem to be awesome in their own ways!

[@TheCrazycrab2]

Mine came with motors plugged in and no solders only the leds are soldered? It was from FPVFASTER Australia. What’s the best next step to get the real deal?

[@Kabab]

It's fine if the motors are plugged in on this platform. The performance difference isn't much

[@TheCrazycrab2]

KababFPV okay, thanks for your swift reply man you’re the best when it comes to reviews on my opinion 👍👌

[@bonkCsM]

Could you expand more upon changing the battery connection on the drone? I'm looking to get into FPV flight and the tiny hawk range is piquing my interest. I cant settle on the 1, S or 2 though, i've seen it mentioned that it is worth changing the battery connection on the S as well, especially for 2s usage. Changing to the connection you have used, can you still just buy 1s batteries off the shelf and away you go? Or will each pack need to be de-soldered to remove the stock connection and then resoldered for the improved one? Same with charging, are there charger options to suit the 1/2s with different connections? I'm familliar with soldering and hobbyist electronics, but not RC at all, so just curious how that works re: power delivery. thanks for the good review, cheers.

[@Kabab]

To charge these little batteries, all you do is plug them into the charging board. That's all. It doesn't take any effort. Larger chargers will charge batteries from 1s to 8s but they require you to just tell the charger what settings to use for charging. What the battery voltage is and how fast to charge. Welcome to FPV

[@johnsamuel10]

@@Kabab He asked about changing the plug. I am also new to fpv. Can you please give a little explanation? I bought this quad after seeing you fly this. Thank You. I am yet to get a grip on my indoor flying in acro. Are you flying at 200 mw in this video?

[@WildCaptures]

I know your not into brushed Whoops but do you think the BT2.0 would improve flight time/performance on a brushed indoor Whoop?

[@WildCaptures]

When I received my Tiny Hawk 2 I immediately did the Xt30 conversion and you were right👍🏻👍🏻👍🏻

[@Kabab]

The BT2 is like an intermediate connector. I do think it has a place and that place is 1S on medium sized whoops. The 75mm ones. If you have whoops with the solid pin PH2, I don't think it's worth the effort to upgrade. But if it's a rolled pin PH2 it's definitely worth it.

[@checkeredflagfilms]

How do feel the signal 'range' outside compares to the 'original' TH?

[@Kabab]

Bit better. Actually notably better. But not fantastic still

[@tomascandela3089]

I recently purchased the tinyhawk 2.I have not recieved it yet.my question is will the th 2 fly right out the box when I bind it to my tanaris qx7 and assign the channels accordingly ? I asume the firmware is already installed ? or do I need to ser it up in beta flight for it to fly?

[@Kabab]

Yep it will

[@tomascandela3089]

@@Kabab thanks brotha

[@SplashFPV]

Hope they bring a freestyle 2 with better cam and vtx. Really love the freestyle with run cam nano 2

[@strawdeben2106]

try put the v2 components on the freestyle frame that might be great

[@Kabab]

Motors are a little small but it would work

[@dirtbikeboy66]

I bought one of these and the camera got too hot during the first battery and caused a video blackout. I had to let it sit for 2 minutes and then it started working again until 1 min. into the second battery and then I had the same thing happen. I bought a new camera for it and had the same issue. Then I replaced the camera with the old tinyhawk s camera and it works great. Any help with this would be awesome. I never received a answer from emax.

[@Kabab]

What's happening is the vtx is failing. Not the camera

[@dirtbikeboy66]

@@Kabab that is what I thought so I bought another board as well and the same thing happened. The runcam is getting so hot I can't touch it.

[@dirtbikeboy66]

@@Kabab I took your advice and installed a TBS unify pro nano and it seems to be working better. I still need to get the motors soldered back on but it has not cut out yet. So It seems I had two separate boards with bad vtx's. Thank you for the help.

[@choanlpoto]

Hello how do you convert your battery 1s to xt30 ? You just use an adapter ? Thx

[@Kabab]

You would need to cut off the existing connector and solder on the xt30

[@baconbits5000]

thanks for this! Got the RTF kit and ready to move onto better receiver + goggles (with recording capabilities) can anyone advise on this?

[@Kabab]

I'd strongly recommend dji. I know it's expensive up front but very well worth it

[@baconbits5000]

@@Kabab Thanks! I don’t mind the spend for quality...I have the Mavic pro 2 and love it. Any reason why DJI over Fat-shark goggles or taranis receivers?

[@aoutivd]

I fly flysky, Is adding a nano crsf gonna add too much weight or draw too much power?

[@doubletapgaming1189]

I put the FS-A8S V2 in my tinyhawk and it flies great.

[@dronehd-aerialcinematograp4315]

I can almost afford it, do you recommend it for this price and for kids/beginners? The drone i've bought before was the trashcan, but that thing has too much problems. Do you have to replace things very often? (I had to replace the crazybee from the trashcan, but i didn't, because if i did, I COULD ALMOST BUY A TINYHAWK FOR THAT PRICE) please answer it Kabab, it's a lot of money for me!

[@Kabab]

Everything breaks if you smash it hard enough but this thing is very robust. It's probably one of the very best options durability

[@noobfpvmoment5768]

@@Kabab thank you very much for ansering my question!

[@brknpropfpv3899]

Thanks for the review and the reminders to floss. IMHO those are 1s motors n that’s how it should be flown. Hopefully Emax will make a proper 2s version. 😎🎮🤙🏻stay up Happy holidays an Aloha

[@yotaforlife8408]

why does my tinyhawk stop working when I land or lightly bump into anything lighty,,i have to replug the battery everyrime

[@Kabab]

one of your power lines or the power connector might be loose. or there could be something loose on the circuit board. hard to say

[@skateradeable]

So I’ve just set mine up, flying fine and set it up for acro. After a few laps I tried to do my first roll and then flip and both moved soooo insanely slow it just threw me to the ground. Any ideas how to fix this and make it as reactive as my 5”? Like yours is in the park here? Wasn’t sure it was PID tuning or something I didn’t set right

[@Kabab]

plug in the USB and change the rates in betaflight.

[@skateradeable]

KababFPV thanks for the quick reply, will do! Started playing w rates yesterday, just wasn’t sure if I had missed some other setting was all. 🙏🏼

[@archer4922]

Speaking of the vtx I have the same issue on both the original TH and the THs no matter what goggle or module I use. The blinding white flashes. Hate it.

[@Kabab]

No idea why it happens

[@archer4922]

KababFPV me either. I’ve tried 3 goggles and 4 different receivers and all did it. Haven’t tried a clear view tho. But the old eachine vr007pro’s do it the fatshark attitude v4’s with stock rx do it and with a true-d as well. Even my newish hdo’s with a true d 3.8 do it as well. I donno. Weird tho.

[@Kabab]

@@archer4922 right. If you have a Clearview, rapidfire or TBS module it's all good. Anything else will flash

[@archer4922]

KababFPV gotcha. Been thinking of upgrading one of these days. Just not sure where to begin. When I bought my attitude v4’s a cpl years ago from a bud of mine it had a true-d in it. I just bought his hdo’s but he kept the clear view for his hdo 2’s. So I’ve been using the true d mainly. I need to look into rapid fire and the new tbs one. Their price is similar but have no clue on which one to get.

[@ozoneflysurfer9491]

nice video looks windy what's the most wind you've flown this quad?

[@Kabab]

Really really windy. Of course it's affected but not as much as I expected

[@JodyGUY]

Thank you for the great video! Your channel is an invaluable resource to me. What 1s and 2s batteries do you recommend?

[@Kabab]

Gnb for sure. The 450mah cells are fantastic from them

[@SunriseWaterMedia]

How did you unlock the vtx and set up the power?

[@Kabab]

You hold the button on the vtx as you turn on and for another 6sec I believe

[@srqcrna]

I have rapid fire immersion but my video isn’t as clear as yours? Any suggestions?

[@srqcrna]

Actually my video looks like that 2S flight? Is that normal for analog?

[@Kabab]

Yeah analog video isn't the greatest and is susceptible to lots of interference

[@srqcrna]

KababFPV Jesus Christ! I have been spoiled with getting DJI too soon... too soon.. lol

[@BurgerurgerFPV]

I’m not sure if my vtx is at 200 or it just says it is in the goggles, i heard you have to unlock it before you can switch it, but i think i pressed the button, and i think i unlocked it but how do i know for sure?

[@Kabab]

you hold the button while turning it on. that's as far as I know

[@bwasfpv]

i need a whoop right now,its hard to find a spot for a 5inch

[@Kabab]

that's what my toothpick and babytooth are for. both in 3" :-D

[@edouardmalot51]

great video, as usual

[@Max_0578]

Hey Kabab, the tinyhawk 2 comes with 8k 2k. If i switch it to 8k 8k i get some really bad video noise. What is your tune on this thing and do you have an idea why i have so much noise on 8k 8k?

[@Kabab]

I don't think I've ever seen that cause video noise. Curious 🤔

[@Max_0578]

@@Kabab yep, thanks for the answer and congrats with the 40k!!!

[@fpvkabo]

The name in the OSD for this quad is Anothertinyco??, Is this the kwad for men with tiny....

[@theDudeAbid3s]

cockerspaniels

[@-Sullens-]

So would your recommend the tiny hawk s or the new one?

[@Kabab]

Neither really. I want a better Vtx and a Nano 3 in there. Then I'll freely recommended. But my 'wants' are also unreasonable and I know that. So kinda up to you...

[@Burn377]

If you can get a good deal on the S go that route and put the nano 3 in. I fly mine every night playing hide and seek with my 2 year old and it's been through hell and the frame hasn't broken yet. You'll have a weight advantage over this one and with that comes better performance and longer flight times. The vtx isn't great but it's perfectly adequate for indoor flight which is the primary market for these.

[@michaelstewart2479]

Can i use the tinkhawk remote and glasses with this?

[@Kabab]

Yeah you should be able to

[@HerbertBrasil]

Man are you still flying 200 mhz? i head tinyhawk 2 Freestyle burn the vtx using 200 mhz, do you know why it happens? it happens with tinyhawk 2 even?

[@Kabab]

I never had an issue with that but emax vtxs in the past did have some issues

[@checkm8606]

Would you still recommend the original tinyhawk?

[@Kabab]

Original TinyHawk is still good but this frame is far better

[@checkm8606]

KababFPV so just buy the original and upgrade the frame?

[@Kabab]

@@checkm8606 that would be pretty good but might as well get the new motors and props too

[@Kabab]

@@checkm8606 really the best would be this one with no LEDs and a nano 3 cam

[@checkm8606]

KababFPV so just buy the new one an get the nano3? (:

[@ultifix2251]

Can you do a stock cli dump and post it please?

[@Kabab]

I'm using the settings it came with and I just set the rates back to betaflight default

[@ultifix2251]

@@Kabab unfortanetely all of the settings got wiped off of the quad... If you know of anyone that has a stock cli dump posted that would be awesome

[@Max_0578]

@@ultifix2251 It is on the Emax Usa site. Go to the tinyhawk 2 bnf and scroll down.

[@Soulcommander]

What type of controller are you using to fly this quad

[@Kabab]

My qx7

[@MacJunkyFlips]

@@Kabab how do you bind this to the Qx7?

[@Soulcommander]

@@Kabab You fly great

[@jacobjstoffer]

@@Kabab Does this drone work with x9d lite?

[@Kabab]

@@jacobjstoffer unfortunately no. It only binds D8 and old version d16. You can add your own Rx however

[@alexmoil6256]

What IS the stock connector? A balance one ?

[@Kabab]

PH2 with hollow pins. Rated to 1A and actual function is even lower than 1A due to the hollow pins. It's just the worst imaginable connector situation for this thing....but it's fine for 1S still. Not that much loss on just 1S.

[@CanadianKayak]

Has anyone put project mockingbird on this tinyhawk 2 yet? Any reviews?

[@Kabab]

I believe they have a tune for it

[@CanadianKayak]

Maybe review it in a video? 👍

[@Kabab]

@@CanadianKayak wish I had time to do it all

[@RCOverKill]

I like this, but I really want to see the street scraper.

[@Kabab]

yep that's coming. end of the month

[@scorpioga3t6]

How much time we have to wait for tinyhawk 3 in your opinion?

[@Kabab]

I actually dunno if there will be one...

[@scorpioga3t6]

@@Kabab why. Isn't emax realising a new tinyhawk any year?

[@scorpioga3t6]

@@Kabab thanks for the answer

[@du4-fpv777]

I have been subscribed to you for a couple of years now and just had to re subscribe today! KZbin is getting ridiculous now

[@Kabab]

Yeah they said they were gonna cut a bunch of subs because they were fake.....like Yelp downgrades your review because it thinks it's fake...

[@du4-fpv777]

@@Kabab Well then they are screwing ppl over because i have been using KZbin daily for the past 5 years that i have been flying FPV. the only thing i can be guilty of is supporting my hobby with like buttons!!!!! I hope someone puts youtube out of business! Keep up the great work!

[@Politicallyhomeless957]

This could be perfect for my 9yr old son 🤔 he wants an AcroBee but this may be a better fit.

[@Kabab]

Both are good.

[@junebugpetty7386]

How is it for Acro flying?

[@Kabab]

If you mean acro like acro mode, I only fly in acro mode. If you mean acro like flippy floppy's, well it's a whoop so not so good.

[@junebugpetty7386]

Thanks

[@djs134]

Looks pretty decent but I had a ESC on 2 different tiny hawk s fcs go on me so I’m gonna pass. I kinda babied the second fc to. Maybe just bad luck, who knows.

[@joshuaraley686]

On my tinyhawk freestyle I abuse tf out of turtle mode I'm doing find

[@djs134]

Joshua Raley yeah my freestyle is doing well also. Just had terrible luck with the s. Same board to, so I don’t get it. Loving my BeeBrain brushless though

[@alexelsewhere404]

Anyone have "RSSI LOW" and unable to fly? Need help please.

[@danieledm0101]

Yes happen to me the other day, I found out its the receiver antenna that was broke internally, try to check yours it can be changed if you know how to soldering

[@sinnedfpv5333]

Oooh i was waiting for this one to arrive! Thank you for reviewing it so fast! Looks very good but the mobula 6 is also soo tempting and is only 20g! 😱 Which one you think is best?

[@Kabab]

when I get the M6 I'll let you know :-D

[@Shooter_FPV]

So should we replace the PH2 with an XT30, then put XT30 connectors on a 1S battery?

[@Kabab]

That's what I do. Or you could use the BT2 for 1s

[@Shooter_FPV]

KababFPV Well if the XT30 is more efficient, then I’d think that would be the way to go... hoping they sell the frame separately so I can transfer my OG Hawk stuff over

[@Kabab]

@@Shooter_FPV the bt2 is enough for this quad.

[@xoriso3d]

Hey now that I think of It you should make a Telegram group where the people can share their builds and problems, we are actually a lot of people who can help each other

[@Kabab]

I've had a discord. I just don't have time to manage it

[@dash-boardcam549]

I’m sometimes getting an Axloss on this, anyone have suggestions?

[@Kabab]

what's axloss? Receiver?

[@spatum1970]

Ciao e complimenti per il video e per il tuo pilotaggio. Provo a scriverti in inglese: Hello and congratulations for the video. I have updated my tinyhawk 2 with jesc and telemetry. I could have your PID / RATES values. Thanks. Sorry for my english, but thanks to google translator I can write you.

[@Kabab]

My rates are the same for all my quads. 0.98, 0.64, 0. The PID's on this were whatever came by defaults. I'm usually running defaults.

[@spatum1970]

@@Kabab thanks a lot.

[@checkeredflagfilms]

I recently purchased the TH2. What's the best way, or if there's more than one way, to change the vtx power to 200? Default is 0. Range is 0-7. I tried typing in 7 via the CLI BetaFlight and I select 'save' and reconnect but the 'power' is still set to 0. Any ideas?

[@Kabab]

you should be able to do it from the OSD with the controller. no computer needed.

[@checkeredflagfilms]

@@Kabab Thanks...right you are...I was able to do so successfully.

[@MariomasterNSMBHD]

I kinda hoped for a better VTx. 100mW would've already been enough.

[@carvesk8]

the vtx has 25, 100 and 200mw settings

[@finexity5054]

I NEED HELP WHENEVER I FLY MY DRONE FORWARD IT FLIPS ITSELF AND JUST GOES STRSIGHT TO HE GROUND THIS IS MY FIRST FOR FPV DRONE AND I KNOW NOTHING SO PLEASE DUMB IT DOWN FOR ME IF YOU HAVE AN EXPLANATION

[@Kabab]

So is your caps lock button broken? Believe it or not there's a real person on the other side of messages usually. You haven't described your problem adequately to be able to diagnose. There are also tons of Facebook groups dull of members that will gladly help. But not if you're gonna yell about it.

[@finexity5054]

KababFPV sorry bout that I was pretty mad at the time but when I’m in beginner mode it fly’s ok. I tried it line of sight and I noticed it drifts a lot and takes a while to change direction I’ve had a 15 dollar line of sight drone before that flys way better and smoother on its lowest mode( beginner mode equivalent) but when I go into intermediate or expert it just goes straight to the ground but when it’s beginner mode it doesn’t it’s as if it wants to but it’s not powerful enough to do so. I don’t know if it’s the drone or if just doing something wrong. Plus I have another tinyhawk that’s unused(bnf version) but I can’t figure out how to bind the controller to the other one because if I can fly the other one. If it does the same thing it will confirm that it’s me doing something wrong but if it works fine it will confirm it’s the drone not me

[@Kabab]

@@finexity5054 are you using an emax controller or another one? Is it in acro mode where it doesn't self level on it's own? That's how we usually fly these things. It doesn't have any self level

[@finexity5054]

KababFPV I’m using the emax controller from the rtf version i was thinking that too but I have no idea why it would be like that out of the box and I also have no idea how to get it out of Acro mode I’m pretty sure you have to get that beta flight app but from what I saw on KZbin it looked pretty confusing

[@Kabab]

@@finexity5054 yeah unfortunately that's what you're going to need to use. It's confusing at first but once you become familiar with it, it's not so difficult. Apologies for how unintuitive the industry still is as a whole. It's gotten a LOT better the last few years. Spend some time just looking at the tabs in betaflight. Also, the Emax controller unfortunately is not easy to use at all. It's more of a toy just to get people started. The well known best way to start is to buy a real controller and just play the computer simulators for at least a week or two. Then you're familiar with how things work and you haven't wasted any money and you'll use that same controller for the real thing. Many controller options these days.

[@RobertEhrmann1976]

what about 200mw vtx??

[@Kabab]

I think this one does 200

[@fpv568]

Where's the glide floss ?

[@Kabab]

Hoping to have time on Sunday to make that video

[@fpv568]

@@Kabab fingers crossed, it's supposed to be my Christmas present :)

[@Cappurnikus]

I like this model. I don't like the unique FC shape. If the FC breaks, you are stuck getting the same one, at a premium price compared to it's competition.

[@Kabab]

it's not that much more expensive if at all more but I totally understand.

[@baddatfpv8803]

Nice pilot name

[@iwalker1985]

NTSC or pal?

[@Kabab]

I believe ntsc

[@iwalker1985]

Thank you

[@HK_Martin]

how did they manage to make it look worse.. oh and when will they add a better vtx to those micro drones.. *sign*, ill stick to building a 3 inch toothpick.

[@Kabab]

I feel ya. I actually like the rocket man camera top

[@evanlebaron9465]

here's a cookie 🍪

[@spartan-fpv6936]

Gday Bob, great review, im not convinced about this one from what i have seen, its only 3 grams difference and yet you get more flight time on the tinyhawk s and it seems faster on 1s the good thing is the camera and vtx upgrades but the flight time is not great, awsome job mate.👍🛸

[@thanhthuy4926]

How to set rssi on OSD please?

[@Kabab]

That's actually a function of opentx in a way. I really don't remember how since I did it in my controllers years ago. I think bardwell has a good video on it.