TinyHawk II

[@tomelcock7659]

It’s actually so helpful how quick you go through the things at the start because some reviewers go on for hours

[@BMathiesen]

Also my tinyhawk 2 came with the motors having JST connectors or w/e they are called with the 3 ports. They were not soldered on at all. Everything else was the same. Camera had a connector and LED's were soldered.

[@kevinsmith9420]

Even now, 7 mo. later, mine just arrived with the plugs on the motor leads. Room for modification or . . .

[@Forty5Kimber]

Hey Nick, I bought this Tinyhawk II and was pleased but it did have much shorter flight times than i expected and was a tiny bit disappointed but after catching a couple vids from UAV Tech and Bardwell I decided to try the 48khz and rpm filtering. WOW! I cant believe what a difference it made. I am consistently flying 3:45 to 4:15 every pack indoors on 1s 520mah, a full minute more flight time and much much quieter and smoother. If i fly real clean in my small home it can be a little better. I am sure you probably know this but i thought I would share with you and your audience. Thank you for sharing this great hobby with us and keeping it real and fun. Shalom

[@raymondbriceno3276]

Remember everyone if you buy this don’t expect to fly like this . This a professional pilot. Or at least really advanced. I got my quad and it wouldn’t arm out of the box a couple KZbin videos later and a maiden flight. Now I’m here. Watching what this bad boy can do in capable hands. Your flying makes mine look like a child using it as a toy.can you say angle mode?

[@NickBurnsFPV]

flight "skill" is all about flight time and enjoying the flight. I have a few fpv years under my belt and continue to enjoy myself with each flight. Keep flying and you will feel more comfortable and confident.

[@Eli_skips]

You’re skills on flying is stupendous!! I’ve been trying to float mine due to trying to control the throttle. I got the tiny hawk 2 because of the 2s battery it comes with.

[@NickBurnsFPV]

Just keep having fun and it will come with time. I have been flying over 5 years, with daily flights or nearly daily flights.

[@TweakRacer]

Did you use Rate profile 2 for 2S like it said on the warning card? Rate profile does not auto switch (that’s for PID profile only). The Rate profile may have throttle tweaks to help with the 2S power curve.

[@NickBurnsFPV]

I didn't use the secondary rate profile.

[@unnamedchannel1237]

It said in this video that beta flight auto swaps profile ?

[@TweakRacer]

Nick Burns It is confirmed that the second rate profile has a different throttle curve, limit, midpoint, etc. Please re-test :)

[@TweakRacer]

Drunken FPV Please re-read my post. Betaflight auto cell count profile switcher ONLY switches PID profiles, NOT rate profiles.

[@TweakRacer]

Nick Burns Oh, and turtle mode on slick surfaces seem to work better when you pitch fore and aft with this drone, rather than side to side.

[@Evo2Raid]

The adjustable angle on the camera is nice

[@tomme6x3]

I have found that I still have to switch rate profiles manually when I change from 1s to 2s- I found the throttle curve in rate/PID profile 2 is way more stable and predictable- similar to flying with the 1s but with more punch...just my experience with this- thought I would share

[@5FiveseveN7]

Freaking legendary flying! I just picked up a Tinyhawk 2, my first ever FPV Drone. I want more batteries!!!

[@stevensbox9625]

Great detailed review! Now a subscriber. Were you able to bind it in D16 like my Tinyhawk S (without telemetry)? A fix I found online to calm down 2S flying indoors is to create a second model on my Xlite Pro with the throttle input scaled down to 50%. Works pretty good with a little more flight time.

[@hbnation1159]

CRAZY indoor flight!!

[@wisdirty]

I personally only fly 1s in the house and use betafpv frames and canopies and I had problems with turtle mode on hardwood floors but was able to fix the issue with 2 very small hot glue dabs on either side of canopy ( and frame )

[@NickBurnsFPV]

ah yes I have seen that. Often have to turtle until it hit a rug or something. You have a genius solution.

[@echobeefpv8530]

I like what Emax is putting out. I couldn't get into any of them because I used to fly Spektrum. I just got the Jumper T16, so now I can fly whatever !!

[@NickBurnsFPV]

your all set with the T16

[@jasonarcher7268]

I love my TH2. Great quad for learning fpv.

[@Dronesteve-72]

Nick can I set the throttle on the supplied tx to slow this bird down once armed it goes like a bat of hell Thanks 🙏

[@NickBurnsFPV]

I would use a throttle cut on the quad itself. I believe joshua bardwell has a good video on throttle cut. Its like a governor that limits the thrust to a desired amount...say 70%.

[@GeezerGramps]

Great review as usual. However I think personally I’ll stick with my Tinyhawk S, I’m very happy with the way it flies on 1s in my environment.

[@marcsangiuliano4273]

If I unlock my video transmitter will I get more output power? You are definitely my favorite rc guy cause you’re really funny when I can keep up with you and you have the best personality. I was watching a old Joshua Bardwell video and he mentioned you and made you sound like a rc god !

[@NickBurnsFPV]

Yes, unlocking allows us to use the power output of the hardware. Its often locked as its "illegal" to use above 25mw without a ham license or just not allowed depending on the country. Thank you. I appreciate the kind words. I have enjoyed rc for many years and as an adult found fpv which is nearly all the rc I do these days. The fpv experiences is so unique and speaks to me.

[@El_Muffy]

Did you use fatshark with rapidfire in this video?

[@OvermarsGaming]

Hi Nick, did you change the PID or rates settings on your tinyhawk or you just run stock setting?

[@NickBurnsFPV]

stock, settings. Its rare I change betaflight pid in a review video. From time to time I will make a change post review, I try to make that apparent when I do.

[@karldunn1464]

Great video Nick i like the fact that you can now adjust the camera with this new frame. Do you think we can put the original non adjustable camera frame tinyhawk components into the new frame. Thanks

[@NickBurnsFPV]

yes, I do think we can transition the old parts into the new frame.

[@dirtbikedudes5514]

my screen shows up different in the goggles, is there a way to adjust that, is it something in beta flight?

[@NickBurnsFPV]

Not sure what is meant by screen. Are you looking to move the osd elements to different locations on the screen? Its in the betaflight osd tab if so.

[@maxound]

Insane video, great pilot and nice house ;)

[@evanlebaron9465]

we're you flying on 1s?! and how is your signal reception so good? one more thing how do you change your rates to make your drone do flips foster

[@NickBurnsFPV]

voltage is displayed in the bottom left. To change rates connect the drone to the betaflight application and increase the rates on pitch roll and yaw on the tuning page.

[@Funcentric]

You normally do a punchout over the house and a dive back down. Any reason you didn't attempt it in this video? Not capable?

[@NickBurnsFPV]

Well kinda. The punch outs will be more like a steady climb, there will be very little float over the house as there isn’t much weight or inertia

[@tristanfaletra215]

2021 model comes with motors plugged in, no longer soldered, LEDs are still soldered

[@NickBurnsFPV]

Thank you for that information.

[@duggerinc]

I'm a huge, HUGE fan of the tinyhawks! It was my first fpv drone after tons of research. I'll end up with at least one! And nice ripping around the house nick, great skills!

[@minecraftminecraft3580]

i gotta say your house looks awesome

[@NickBurnsFPV]

Thank you

[@williamdecker3989]

Hey Nick, nice flyin', but you need to remove that basement door to quicken your times! Lol!

[@NickBurnsFPV]

Sorry, thats a no go as that separates my drone cave from the guest area.

[@BMathiesen]

Damn hell of a pilot my friend! Straight rippin through your house! So yea my tinyhawk 2 sucks so much on 1s batteries. I almost think mine doesn't even fly like yours does on 1s. The throttle takes me up SUPERRRR slow, and it just doesnt get up to speed for crap. Specially if were comparing it to the original tinyhawk witch has much better throttle and speed on 1s batteries. 2s batteries are great but I cant get them to charge fully aswell as I cant find any locally. In the process of putting a dual JST2.0 connector so I can use two 1s batteries. All info online seems that it should be just fine and have seen 1-2 people have done this successfully.

[@WildCaptures]

Have you tried the Kabab XT30 conversion? I soldered an XT30 on my 450mah 1s batteries and it definitely makes a difference. Less sag and a little more flight time👍🏻

[@WildCaptures]

I’ve got GNB 1s 520’s on the way and it may be a sweet spot after the XT30 conversion🤷‍♂️

[@NickBurnsFPV]

I haven't tried it, seems for props above 40mm the additional weight wouldn't be to much of a penalty.

[@TheCrazycrab2]

Nick Burns I can confirm the XT30 plus is great for all tiny hawk models. I’ve done it on all of them as dedicated 2s flyers I got the 2 on the way

[@nal0s0ljah]

Would you recommend the th2 rtf bundle or another rtf bundle? For a beginer fpv pilot. I have flown the e010 and e013. Want to get something that's comes with everything and upgrade the remote and goggles later on as I get more into it.

[@NickBurnsFPV]

yes the TH2 bundle or even the TH bundle if the camera view isn't a deal breaker.

[@nal0s0ljah]

@@NickBurnsFPV thanks for the reply. Subbed!

[@RichardTardif1984]

I have the original tinyhawk and I am not looking to upgrade unless for a mobula 6.. But my frame has taken a beating and I am wondering if I can transplant it into this frame. I would not want the weight to be much heavier tho.... What is the weight of the frame alone compared to the original. Also is the s frame more durable that the original. It seems the spokes are wider but not sure if it makes an actual difference

[@NickBurnsFPV]

Not sure of the weight difference in frames, I would expect this frame to be very durable.

[@wmcewa01]

Does anyone know if Nick was flying on the stock rates and pids? Seemed super fast.....

[@NickBurnsFPV]

I am using the defaul pid profile, with the rates I am used to in acro/rate mode.

[@wmcewa01]

@@NickBurnsFPV thanks Nick! I figured out my "issue." I fly almost exclusive indoors and in angle mode. The stock settings on the TH2 limit the angle to 30 degrees which severely limits speed. I increased that to 55 (I think stock betaFlight is 50) and this thing now RIPS! Thanks for all the great content Nick; I've been binge-watching all of your videos as of late.

[@johnnysouth4982]

Will this bind to the controller and goggles that come with the first tiny hawk and is the beeper louder love the first one thanks happy holidays

[@NickBurnsFPV]

I would think so, but I don't have those to verify.

[@Funcentric]

Thanks for your videos. Fellow subscriber here. I have this TinyHawk and wondering what you'd recommend as a step up for a newbie looking to get into Freestyle for something outdoor to fight against wind? I'm thinking maybe something 3". Not quite ready for a 5" ad probably won't be for quite awhile.

[@NickBurnsFPV]

If this is your first quad a small increment in speed and thrust would be the route I recommend. The tinyhawk 2 race or freestyle would be a good step up. Or the sailfly x or larva x or others like it. A traditional 3 inch is a big step up in speed and thrust.

[@althafraja544]

what type of transmitter did u use ? and how to bind it ? could you please make a video about it, i am a newbie 😅, please help me sir.

[@ELValenin]

If you're a complete newbie there is a RTF (Ready To Fly) set with transmitter, quad and goggles included. Just search for ''tinyhawk 2 RTF'' on banggood and it'll pop up :) EDIT: and everything is already bound in that kit.

[@FlyingBuzzard]

Hey Nick, know this video was awhile back...BUT have you ever taken the thing apart? Reason I ask is it appears the plug mounted to the board the motor plugs into, is glued on....I went to unplug the motors, 3 with no issue the 4th the entire plug came off the board even without any pressure, it does not seem to be soldered it appears to have been glued, looks like some sort of clear thin glue It has 3 contacts in the front and one on each corner of the rear and it looks like there has never been a solder on it...and would not know how one could get a soldering iron into it, as it would have to be the size of a straight pin if it did...LOL May just have to buy another one, I enjoy these tiny things Thanks in advance for any advice/help you may have.

[@NickBurnsFPV]

Did the pins come out with the plastic connector? The connector can come off the board and leave the pins behind, it should slide off easy though

[@FlyingBuzzard]

@@NickBurnsFPV the entire brown connector came off the board-pins and all that the motor plug goes into....appears it fits right back down, it looked like it was glued and not soldered...tried gluing it back and have pins on bottom touch the pads on the board does not work...have no clue how one could solder it, it is so small, barely can see it with magnifying glasses... have no soldering tip that small, LOL Probably will buy another one...Thanks Nick for the reply

[@NickBurnsFPV]

@@FlyingBuzzard We do need a very fine tip to solder those pins again. Really strange it was glued. I have not heard of that before. Was it purchased used by chance?

[@FlyingBuzzard]

@@NickBurnsFPV No, it was new and it flew great...I was going to clean it and thought I would paint the frame for fun,and when I went to unplug that motor it just came right off ( something shiny on the board where it sat assumed it was glue )...Some have said just solder the motors direct, may have to just do that I am not keen on soldering especially these tiny pads/pins/wires....hard for me to see even with magnifying glasses and old shaky hands.. But may not have a choice . Will have to get me a small tip, or a smaller iron. Thanks Nick....for the reply, this one is strange for sure. RCing in SC made a video of what i should do, here is a link in case your interested kzbin.info/www/bejne/i5Pai4mkgNWCjbs

[@NickBurnsFPV]

@@FlyingBuzzard yep, that is probably where we are at with it. Being in micros I only get soldering irons that come with those tiny tips, even when soldering larger wires I just lay it over on the wire. flux will sure help too.

[@captaincavemanfpv9772]

I've had a th2 for a couple years now. Me and my son have bashed the crap out of it and it keeps on flying. Has anyone put the th2 components and put them on the freestyle frame(or another frame)?

[@NickBurnsFPV]

Most of the emax frames will support the aio in the thII. Except for the new tinyhawk II frame. Emax used the same style of aio for a few years.

[@slowentropy4531]

I think I've said thia multiple times, but put some solder in those hollow pins and boom it's alot better on the batteries :)

[@NickBurnsFPV]

others might be doing this. I try to not make mods when reviewing a product.

[@slowentropy4531]

@@NickBurnsFPV of course mate, I was just hoping to help a few ppl enjoy the 2S a bit more haha. Your reviews are the best in the business for micros mate!! I fly exactly the same style as well, I just love to rip as fast as possible around, over and under stuff. Cheers your Aussie fan Dan 👍

[@Weezy4reezy]

I just got my tinyhawk and i think what youre talking about at 4:12 is the problem im having. How can i change the required throttle imput?

[@NickBurnsFPV]

Add some throttle expo or look at changing the throttle curve on the radio.

[@Weezy4reezy]

@@NickBurnsFPV thank you so much! You deserve so many more subs than you have. I love your reviews and am so grateful you helped me pick a drone.

[@valden]

Hmm, would this board with the better vtx fit on the tinyhawk freestyle? I'm actually OK with the older camera, but the better vtx already soldered/built in would be nice if they sell the part separately. As always your reviews are awesome nick. Have a great day!

[@carvesk8]

Yes the board will fit but you will need to change the motor mix since the board is rotated 90 degrees on the FS

[@valden]

@@carvesk8 ooh good to know!

[@BrooksCF]

Awesome, awesome review! Do you know of any reason this drone wouldn't be able to fly with RDQ Series 7.4V 2S 450mAh 70C LiPo Micro Battery (Long Type) - XT30?

[@NickBurnsFPV]

no technical reason. The pid tune might not be as good with a bigger battery due to weight, but I would still to fly well.

[@BrooksCF]

@@NickBurnsFPV thank you!

[@AlexanderSimic]

awesome pilot work! i cant wait to get mine soon

[@jakedestinygod9136]

Hey nick I just got my tiny hawk 2 and I’m missing the middle wire soldered onto the flight controller for the motors. Should I be concerned?

[@NickBurnsFPV]

Does it fly? Motors are three phases. Without the middle wire on a motor it wouldn't fly, or at very least not fly well.

[@jakedestinygod9136]

@@NickBurnsFPV gotcha I’ll try to see how well it does when I get home. I ordered it off Banggood

[@samdove3031]

Do you thick there is another way to hold the different batteries

[@NickBurnsFPV]

like a battery strap? Or are you thinking alignment?

[@samdove3031]

Nick Burns yes or the original bands nobody carries them

[@samdove3031]

Nick Burns a battery strap would be nice also but really like the bands that they provide with the quad

[@MrStrikeforce1987]

Great review. Looks like it flies heavy. Is the mobula7 best bang for you buck with a 2s 75mm? Seems like it

[@NickBurnsFPV]

The added weight is certainly felt. 75mm...yes still mobula 7.

[@pksteffen]

Super solid review. Happy with my Tinyhawk 1s original with PMB tune. Juicyhawk FTW!

[@scrc511]

Hi there. I have a Jumper T16 but having trouble programming it to work with Helicopter. I don’t mind getting the TinyHawk 2, do u mind making a tutorial video on how to make this work with Jumper T16? Thanks. Just having trouble with input and mixes, been a while since I worked on X9D Plus. Thank you so much.

[@NickBurnsFPV]

I have not used the T16, the key element is to ensure we are using frsky protocol on the radio, and d8 or 8 channel mode to bind. Mixers would be setup for our switches or "AUX" channels in betaflight. There should be many tutorials how to setup the radio and mixers/AUX channels on youtube and other places.

[@marsrover7838]

Hello friends, I'm desperate.I have a Tinyhawk 2. The drone connected to "Betaflight". Entered the commands "set usb_hid_cdc = ON" via "Betaflight Configurator" and then "save". That worked too. Later I wanted to set the setting to "OFF". Now I get no connection to Tinyhawk. Can someone help me here?

[@tomasvolf65]

Can i charge 2 or more batteries at one?

[@NickBurnsFPV]

With the stock charger? Sure. If I remember correctly it has 4 or more connectors

[@andytaylor3321]

hey Nick i got one for my bday do u have a snappier tune for 2s please and thank u ...great vid my man

[@andytaylor3321]

I have 3 and 4 blade props srry idint say that

[@NickBurnsFPV]

I didn't tweak the tune. the emax tune is very good. If I remember correctly this has two pid profiles. Take a look and try the other profile. you might like that one better.

[@YaboiBlkRob]

Aww that lil punch out over the shed was cute lol

[@NickBurnsFPV]

lol

[@Thyx_]

Is a tinyhawk 2 freestyle good in indoor too?

[@NickBurnsFPV]

If the indoor space if pretty large, or the skill set is enough to navigate the small spaces inside. For early in the fpv journey flying inside will be very difficult.

[@Thyx_]

Ok, i want to learn outside and then maybe trying to fly indoor

[@NickBurnsFPV]

@@Thyx_ Yes, starting outdoor first is a good path

[@dareckowiak]

Bro your home flying beyond master

[@valterszvirgzdins9319]

umm what is 1s and 2s? can someone explain pls?

[@NickBurnsFPV]

its the number of cells in the battery. Often we can visually tell by the side of the battery and the layers. Also printed on the label, each cell is 4.2v

[@adeburnham419]

Hi Nick I usually build and set up my own quads.....However I've decided I want an indoor smooth quad to fly around the house I did have a mobula7 over a year ago but even with throttle taming on betaflight I just couldn't get on with it and got rid of it. Watching a few youtube videos i'm now thinking of buying the new Emax tinyhawk 2 flying on 1s battery looks like a smooth indoor flyer (im not looking to race just to fly around the house under the tables chairs etc)...So here's my question ? My TX is a Taranis X9D+ Special Edition which is a EU version and my four outside quads all have EU software R-SXR receivers on them bound to D16. My Tx had either D16 or LR12 bind modes....Ive just put the latest Taranis update on my radio not ticking 'eu' on Open TX when I flashed it so now I have the option of either D16 or D8 binding. I've read online that through betaflight in the receiver option you can change the tinyhawk 2 from a 'Frsky D for 8 channel' to 'Frsky X for 16 channel' so the real question is this.....Can I now bind in D8 Mode or D16 Mode and what would be the difference am I still getting full telemetry in both ? I only have one model set up in my Tx so all my quads are bound to that ie D16 mode so if I bound to D8 my other models wouldn't work unless I created a second model to bind in D8 ? Basically if I bound in D16 like all the other four quads I could then run the tinyhawk on the one model set up but would I still get telemetry ? I'm just trying to work out the difference between D8 and D16 ? The Emax tinyhawk states its a spi receiver compatible with Frsky D8 mode ? Thanks for any advice .

[@NickBurnsFPV]

Having so many quads I have three models setup on my opentx radios. D16, D8 and Flysky...I have an external module for flysky. I copied the D16 model and renamed it each time for the D8 and flysky. I changed the radio protocol for the other two models. I would suggest D8 mode, very few integrated Rx (spi) are reliable in d16, even if they bind and work, they can cause other issues like short lockouts. My tinyhawks have all be bound in d8 mode. I think the tinyhawk 2 version supports both versions, but again I used d8.

[@DougEfresh.]

How is yours going so fast? Lol. What vtx setting did you use? You get great reception. Great video as usual.

[@NickBurnsFPV]

camera angle increase helps us naturally fly faster. I typically run raceband 1 with 200mw.

[@ChrisParayno]

It's fast

[@DougEfresh.]

@@NickBurnsFPV yeah but does it physically fly faster just by adjusting the angle or is it just a visual thing? I'm sorry I had to ask because I've always wondered. Leave it to me to ask the stupid questions...lol

[@NickBurnsFPV]

@@DougEfresh. Partly it is the visual reference that makes us fly faster. As we increase camera angle our visual level has more quad forward lean and thus the quad is moving faster naturally. We can of course compensate to fly slower with more uptil by focusing on the bottom of the goggle view.

[@DougEfresh.]

@@NickBurnsFPV makes perfect sense now. I can't believe I didn't realize that. I was thinking how can it possibly move faster since it's not making the motors spin faster just by tilting the camera, but of course it will move faster because of the way they are thrusting or whatever. Thanks for clearing that up!

[@checkeredflagfilms]

thanks for the review. I have the 'original' tinyhawk RTF package. I like to fly outdoors but out about 75' or so the signal drops. I understand the 2 has better range. Did you happen to test this or notice better signal reception?

[@Ορέστηςωνσταντινίδης]

Is this faster and better at acro than geprc tinygo?

[@NickBurnsFPV]

likely mainly due to the larger props on the tinyhawk

[@Ορέστηςωνσταντινίδης]

this or meteor 65 or the original emax? Nice video

[@NickBurnsFPV]

I would go mobula6, put it in a mobula 7 frame and run a 450mah 1s battery.

[@Ορέστηςωνσταντινίδης]

@@NickBurnsFPV i want an RTF as a begginer, what do you recommend. The rtf with the tinyhawk ii is a good choise?

[@NickBurnsFPV]

@@Ορέστηςωνσταντινίδης if your getting RTF with goggles and radio I would look at the geprc tiny go. The RTF kit with the tinyhawk, the radio isn't very good.

[@swimbeyonder]

ma come si fa a fare il bind con una taranis? ci sto provando da un ora ma non ci riesco, ho guardato 8 video e nessuno funziona

[@NickBurnsFPV]

Sorry, youtube does not provide a translation I am able to understand

[@swimbeyonder]

how can I bind with a taranis? I completed the fisical bind with the button underneat the radio and the radio, but then the tiny hawk doesn't fly... do i have to do something on betaflight?

[@swimbeyonder]

@@NickBurnsFPV I have a problem with my tinyhawk2, I binded it with the radio, and on betaflight I can see the switches and input actions as gas, yaw pitch and roll working, I also added the arm control, and other 2 as I see in videos, but then, if I power it up with the radio binded it doesn't fly, althought the leds blink wile giving inputs from the radio (that shows that the binding is correct) the props don't spin, it is not working.... can you help??

[@NickBurnsFPV]

@@swimbeyonder do you see that with the drone connected to computer and the betaflight configuration application on screen that when you move the controller sticks there is movement on the receiver page? If so, we only need to set a switch to the arming on the modes tab of the betaflight application.

[@NickBurnsFPV]

@@swimbeyonder Need to set one of the switches to the arm mode. It won't arm while connected to usb for safety, but we want to make sure when we move the switch the arming mode moves from not armed to armed.

[@rogueFactor]

You know how the PGA has Senior PGA Championships. You look as old as i do and your piloting is worthy of an old man championship title. MultiGP Senior Circuit. Thank me later.

[@NickBurnsFPV]

lol. I am nearing 50, does MultiGP have an over 40 division? :)

[@Delano_87]

Hi nick, sick flying! How do you record the drone audio?

[@NickBurnsFPV]

I use a camera sitting near me, then I bring in the audio when I edit the video.

[@RizaGunturPrakoso]

what a huge house

[@carlgray4160]

Another Great Review Thanks. I Still Have The First Tiny Hawk.

[@MCsCreations]

Amazing flying, Nick! Great review!!! 😃 It really looks nice!

[@BlueOvals24]

Do you think this is better than the original TH for a beginner?

[@NickBurnsFPV]

In some ways yes...the camera is better and the vtx is more powerful, in other ways not, shorter flight time.

[@BlueOvals24]

@@NickBurnsFPV Would you say that the better camera is worth the flight time sacrifice? From a newbie perspective, I'm thinking camera quality may not be too important.

[@NickBurnsFPV]

@@BlueOvals24 I agree flight time is more important.

[@checkeredflagfilms]

Hey Nick, I got the TH2. Can you suggest the best way to increase the VTX power to 200?

[@NickBurnsFPV]

First the vtx would need to be unlocked. Press the button by the usb port and hold the button in, then power the TH2, after a moment release, and disconnect power. If the vtx is unlocked we can either use the button and the instructions, or go into the osd with left stick mid and full left, right stick full up center. Select features then smart audio. There we should see a selecting to increase the power or mw, change the value with the right stick mid and full right.

[@ThePrzno]

another great review, u man fly really nice, did you attempt some micros race?

[@NickBurnsFPV]

I have not race against others. Just fly for fun, not many where I live fly fpv

[@momp87]

I see review from Nick. I see Tinyhawk II. You sir - deserve the like. 👍

[@NickBurnsFPV]

Thank you

[@PropsOff]

Excellent Review Nick. How are the batteries held to the frame? Thanks...👍🏻🍻👊🏻

[@needlessgamer9644]

Elastic bands

[@adobedoug2564]

Nick shows a spare white rubber band. This frame appears to have the same “bottom plate” as the tinyhawk s, but white with white bands vs the s’s black.

[@DeadeyeFPV]

Didn't like this Emax, that throttle response for indoors is shaky in my place with kids. But another splendid review. Always a treat!

[@stevensbox9625]

Try scaling your throttle down to 50% in a separate model on your controller for 2S flying indoors.

[@masterpdj2623]

Hey Nick nice vid, I'm just getting started in this FPV flying thing as I need something more than flying my easy DJI drone (Mavic2's & P4 ProV2) I have this TinyHawk drone and I have the first Tinyhawk that I still can't get pass one room LOL but I'm sure I'll get there with practice but anyway I can't get this one to fly. I did bind it and the lights flash when I flick a leaver. I'm having problems downloading bataflight so I can't change the settings in the drone and I think that's where my problem is. I've watch video's on downloading Bataflight but I must be missing something cuz it's taking me to all these weird downloads. Help! Please!

[@NickBurnsFPV]

When you say downloading betaflight I presume we are talking about the computer application to access the betaflight firmware on the tinyhawk? There are also drivers needed to be installed on the computer. They are linked on the opening page of the betaflight configuration application. The betaflight configuration application is available here. github.com/betaflight/betaflight-configurator/releases/download/10.6.0/betaflight-configurator-installer_10.6.0_win32.exe

[@epica2154]

Wait do you have to do anything to fly on 2s

[@NickBurnsFPV]

Not necessarily other than use two batteries. There is a second pid profile for 2s as well. We can either switch it with a computer or using the osd with the radio.

[@RobertKvsv]

Sick flying

[@RCinginSC]

Still amazed at your skilz after all these vids. Emax does a good job at coordinating all the review releases. My inbox filled up inside of two minutes. Now , should I get one? I already have 2 TinyHawks and 1 TinyHawk S. 🤔

[@NickBurnsFPV]

unless these features are really really important, I think you have the best tinyhawks already.

[@jimgolden5761]

Thoughts on Tinyhawk II versus Mobula6?

[@NickBurnsFPV]

Mobula 6 all the way.

[@jimgolden5761]

@@NickBurnsFPV Thank you for the awesome videos! They are very helpful! M6 is pre-ordered! :)

[@NickBurnsFPV]

@@jimgolden5761 Should be a very good time

[@stevensbox9625]

@@NickBurnsFPV The mobulus I bought must have been defective cause I could never get it to bind in D8 or D16. Even tried factory reset in Betaflight.

[@NickBurnsFPV]

@@stevensbox9625 when you attempted to bind did you change the rx configuration in betaflight from frsky_d to frsky_x or the other way around?

[@georgeaura]

Nobody else has mention that betaflight is setup to change profiles automatically

[@snowballfpv7583]

I was thinking the same, how is this done and can it work on the other tinyhawks

[@NickBurnsFPV]

Here is a video JB did on the topic, its pretty cool overlooked feature. kzbin.info/www/bejne/d5DSnYaQacupr6c The basics is the value of auto_profile_cell_count in betaflight.

[@spartan-fpv6936]

Gday Nick, nice work with flying this new emax tinyhawk 2, i cant believe that emax actually changed the s again they must listen to people when they modify or upgrade there products thats very cool, great job work mate.👍🛸

[@zeusruger3588]

Your house is cool

[@FilipRadelic]

I know we’ve all been complaining about TinyHawk cameras and vtx, but this is a bit overkill. I’ll stick to my original with S frame and quad blades.

[@FilipRadelic]

And BT2.0 connector 😋

[@NickBurnsFPV]

If you like performance, yes, lighter is better.

[@brentrickert9400]

In the market for a new tinyhawk and dont know if I should continue to get the tinyhawk s or go with this one? The tinyhawk s looks faster, more agile and more acrobatic but I haven't seen too many videos of this one so I dont know. Also I dont like how turtle mode doesnt work and hope theres a way to turn those LEDs off. (Might also help with battery life)

[@NickBurnsFPV]

I agree the S version is faster and more agile with longer flights. The leds aren't likely consuming much at all.

[@brentrickert9400]

@@NickBurnsFPV Okay that's what I thought lol. Thanks for the reply I know what I'm getting now, thank you!

[@situbes.972]

I still have the 1st version of tinyhawk. Did they ever fix the cumulative amps?

[@NickBurnsFPV]

cumulative amps? I am not familiar

[@situbes.972]

@@NickBurnsFPV as in displaying total amps used on heads up display.

[@RCOverKill]

I wanted them to make these mods, except leds, I'm suprised its the same price. Its definitly not for racing outdoors, Ive burnt up lots of motors on a track no bigger than your yard. So plugs would have been my choice over leds. Good job E max. Thanks Nick!

[@KiLLJOY1056]

Damn i wish my house was setup like that to practice 🤣

[@NickBurnsFPV]

I got pretty lucky as we bought this house many years before I started flying fpv. It is very flight friendly 🤩

[@paulbharper6612]

Mannnnn you can fly

[@Burn377]

Thanks Nick, gotta say I'm less then impressed with this unit. Hoping my pair of Mobula 6's get here next week.

[@NickBurnsFPV]

Its features over performance. No doubt. Some will love it for them and others will be on the other end.

[@unnamedchannel1237]

Burn FPV what broke ?

[@Le_mighty_llama]

Rlly want one but I’m broke lol :)

[@Jrod_FPV]

great review! I commend your ability to fly this indoors without a throttle curve! maxing out at 20% throttle, I wouldn't be able to make one lap! haha, i would have given up and scaled down the throttle after my 2nd crash :-p

[@andytaylor3321]

my motors are plug and play

[@Jesse-Rodriguez]

Camera looks good

[@bengmo64]

How does this compare to the mobula6?

[@NickBurnsFPV]

Not close in flight mobula 6 far better.

[@bengmo64]

@@NickBurnsFPV thanks that makes it easy to decide then

[@rbmwiv]

I wish I had known this existed before I got my tinyhawk s. It’s got all the upgrades I wanna do to my S. After watching the whole video I’m fine with my TH S I will have no problem modding mine. A better camera and vtx are my only gripes. Thanks for the video

[@NickBurnsFPV]

Fly and have fun. Mods are fun too.

[@rbmwiv]

Thanks and definitely will enjoy modifying it. I have been doing electrical stuff all my life. I’m a mechanic and a natural tinker. I would definitely advise to upgrade the battery plug with a plug that has solid pins. I make my own. Buy a bag of connectors and I use 18 gauge silicone wire. There’s places that sell the “power whoop” connector like that for $5 plus shipping. For $10 you can get enough to do 20 connectors and have wire left over to do another bag or 2.

[@dronereviewman9580]

I WANT THIS WHOOP SO BAD!!!! GrEaT ReViEw!!! 👍😀👍

[@natec7398]

Big Nick, this or Mobula 6?

[@NickBurnsFPV]

please see today's video. I believe there is more decision information in that video.

[@natec7398]

@@NickBurnsFPV thank you

[@garanal]

It is no fair. I've just bought my Tinyhawk S and now there is a new one 😭

[@EDerable1]

Same thing here but i decided to love my S to death first😉

[@garanal]

@@EDerable1 I'm with you 👍🏼

[@Burn377]

Other then the camera I don't think you're missing out on much. Plus you'll get 4 minutes plus on the S.

[@jerryliang3581]

no much different with S

[@kydawg1684]

Nick - incredible ripping in your house. I would have hit everything insight and then promptly been jailed in the garage with my toys by the WARDEN (otherwise known as my Lovely Wife). Just awesome man. Love your reviews. Keep up the great work.

[@IanWoolf]

i just got one, and the video is upside-down!

[@NickBurnsFPV]

Camera must have been mounted upside down.

[@IanWoolf]

@@NickBurnsFPV Will the OSD be upside-down if I open up the drone and twist the camera up the right way? Currently the OSD is right, while the image is wrong.

[@NickBurnsFPV]

@@IanWoolf No, the OSD comes from the flight controller, the image comes from camera. Worker assembled yours wrong, unscrew and flip it around, don't get heavy handed and pull hard on the wires, it will be fine.

[@epetrus3813]

Those who know:

[@CanadianKayak]

Has anyone tried project mockingbird on this tinyhawk 2s?